Abstract:Cherry tomato decays easily. Generally, it can be preserved only for 5-7days under normal pressure and temperature. The dehydration of cherry tomatoes into dried or preserved fruits can prolong their shelf life and enrich the market of the fruit. Currently, cherry tomatoes is dehydrated through natural drying. The advantage of this method is simple, and low cost. But the drying time is long and is affected by the climate and sanitary conditions. The product quality is difficult to control. In order to shorten the drying time and prevent mildew, cherry tomatoes are often soaked or sprayed with the alkaline solution. These chemicals are bad for our health. Multi-stage temperature-and-humidity drying is conducted through the material drying characteristics. This method can speed up the drying rate, improve drying quality, and reduce energy consumption. It has been successfully applied for apricot,lyceum barbarum, grapes and other materials. In this study, internal recycling hot-air drying technology was employed for the drying of cherry tomatoes. The effects of drying temperatures, humidity, drying stages and slicing forms on the drying characteristics and the appearance quality of the cherry tomatoes were investigated. Each experiment was composed of four drying stages. The drying temperatures were fixed, the humidity of the environment was changed in processⅠ,Ⅱ andⅢ. The drying temperature was low, the humidity was high at the beginning of processⅣ. Gradually, the temperature was raised, the humidity was reduced. At the end of the process, the drying temperature was higher, the humidity was lower compared with their values at the beginning. The experimental results indicated that pre-heated and falling rate periods exist during the drying of cherry tomato. Previous studies only shown falling rate period. The increase in temperature and humidity has bad effects on the nutrition, color and the appearance quality of cherry tomato. Even though cherry tomato can be heated quickly by increasing the enthalpy. This paper presents a multi-stage temperature-and-humidity drying process as processⅣ. This process included four drying stages, each lasted 0.5, 2.5, 2 h. The end temperatures were 50, 60, 65 and 70℃, the humidity were 70%, 50%, 30% and 10%, respectively. This method not only effectively reduces losses of the nutrition in cherry tomato and changes its color, but also shorten the drying time. However, further researches on multi-stage temperature-and-humidity drying methods and optimistic process parameters for different drying materials are necessary. In this study, some of the cherry tomatoes were cut along their axes, some were obliquely cut, and others were radically cut. Under the same drying conditions, the drying rates of the above ranked in descending order as follows: the axes-directionally, obliquely and radically cut cherry tomatoes. It is expected that this research will add knowledge for the cherry tomato drying theory of hot-air drying technology and support for the industrial development of cherry tomato.

Optimization of Process Conditions for Moisture Ratio and Effective Moisture Diffusivity of Tomato During Convective Hot‐air Drying Using Response Surface Methodology

Model development and optimization of process conditions for color properties of tomato in a hot-air convective dryer using box-behnken design

RSM As an Approach to Optimize Ginger Intermittent Microwave Drying Process

Effects of pretreatments using plasma functionalized water, osmodehydration and their combination on hot air drying efficiency and quality of tomato (Solanum lycopersicum L.) slices

Drying Kinetics and Performance Analysis of Thermal Storage-Based Hybrid Greenhouse Dryer for Uniform Drying of Tomato Flakes

Effects of pretreatment during drying on the antioxidant properties and color of selected tomato varieties

Dried characteristics of cherry tomatoes using temperature and humidity by stages changed hot-air drying method

Experimental investigation, performance analysis, and optimization of hot air convective drying of date fruits via response surface methodology

Mathematical Modeling of Thin-Layer Drying Kinetics of Tomato Peels: Influence of Drying Temperature on the Energy Requirements and Extracts Quality

Enhancing Moisture Transfer and Quality Attributes of Tomato Slices Through Synergistic Cold Plasma and Osmodehydration Pretreatments During Infrared-Assisted Pulsed Vacuum Drying

Some Engineering Factors Affecting Utilization of Solar Energy in Drying Tomato Fruits

Effect of Osmotic Dehydration with Pulsed Vacuum on Hot-Air Drying Kinetics and Quality Attributes of Cherry Tomatoes

Effect of Carrier Agents and Operational Parameters on the Physical Quality of Spray-Dried Tomato Powder: A Review

Comparison of Drying Systems in Terms of Energy Consumption, Effective Mass Diffusion, Exergy Efficiency and Improvement-Sustainability Index in the Valorizations of Waste Tomatoes by Thermal Processes

Drying quality and energy consumption efficient improvements in hot air drying of papaya slices by step-down relative humidity based on heat and mass transfer characteristics and 3D simulation

Comparative assessment of energy analysis, drying kinetics, and biochemical composition of tomato waste under different drying conditions

Parameter Optimization for Microwave Coupled with Hot Air Drying Process of Hawthorn Slices Using Response-Surface Methodology

Response Surface Optimization of Refractance Window Drying of Bitter Gourd Slices

Optimization of Osmotic Dehydration of Tomatoes in Solutions of Non-Conventional Sweeteners by Response Surface Methodology and Desirability Approach

Analysis of energy consumption, heat and mass transfer, drying kinetics and effective moisture diffusivity during foam-mat drying of mango in a convective hot-air dryer

Desiccation Process of Hami Melon Slice by Response Surface Method