Abstract:Closed Brayton cycle can efficiently convert the fission energy of the reactor into electricity, which is an ideal energy conversion system for long life, high-power and compact space reactor. In order to ensure the safe and reliable operation of turbines, compressors and generators, the space closed Brayton cycle intends to cool bearings and generators by working fluid, such as He-Xe mixture. So the cooling will inevitably affect the cycle efficiency. In this paper, three different cooling schemes for bearings and generators were proposed for the space closed Brayton cycle. They are: (1) bypassing some gas from the compressor outlet to cool bearings and generators and joining the mainstream before the reactor inlet, (2) bypassing some gas from the compressor outlet to cool bearings and generators and joining the mainstream after the reactor outlet, and (3) setting an independent cooling loop. The influence of bleeding gas flow rate on the key components was analyzed, and the three schemes were compared. The results show that the temperature difference at hot end of recuperator, molar specific power of reactor, turbine inlet temperature and molar specific work of schemes (1) and (2) decrease with increase of bleeding ratio. The scheme (3) is not effected by bleeding ratio. For a given bleeding ratio, the increasing of compression ratio will promote the space Brayton cycle efficiency of the scheme (1) and (2) at first, then the efficiency reaches its maximum value, with further increasing of compression ratio, the efficiency will reduce. But further increasing of bleeding ratio will reduce the temperature difference at hot end of recuperator, the cycle efficiency and compression ratio can not reach the maximum when the bleeding ratio increases. Therefore, there are optimal bleeding ratio, maximum cycle efficiency and corresponding compression ratio. And the maximum cycle efficiency of scheme (1) and (2) increases first and then decreases with the increase of bleeding ratio. The scheme (1) has the highest efficiency of power generation, 21.63%, because the bypass can reduce the core heat absorption and the turbine inlet temperature is the highest. The scheme (3) has the lowest efficiency which is 19.78% with the highest molar specific power which is 0.8832kJ∙mol-1 , and this scheme can reduce the core inlet temperature and the power of recuperator. The analysis provides a reference for the cooling design of the space closed Brayton cycle in the future.

Transient behaviour and optimal start-up procedure of closed Brayton cycle with high thermal inertia

Optimization of Start-up Process in Combined Cycle Steam Turbine of a Power Plant

Optimal Criteria for Different Parameters of an Irreversible Regenerative Intercooled Brayton Cycle under Maximum Power and Maximum Ecological COP Conditions

Experimental Investigations on Dynamic Performance of Organic Rankine Cycle Integrated with Latent Thermal Energy Storage under Transient Engine Conditions

Experimental and Numerical Study on Thermal Hydraulic Performance of Trapezoidal Printed Circuit Heat Exchanger for Supercritical CO2 Brayton Cycle

Experimental and Numerical Investigation on the Dynamic Characteristics of a Lab-Scale Transcritical CO2 Loop

Dynamic Simulation and Analysis of Transient Characteristics of a Thermal-to-electrical Conversion System Based on Supercritical CO2 Brayton Cycle in Hypersonic Vehicles

Investigation of Bypass Valve Positions on Performance of Closed Brayton Cycle

Areal Closed Intercooled Reheating Regenerated Brayton Cycle Power Optimization

A Study On Performance Characteristics For Closed Brayton Cycle In Inventory Regulation

An adaptive CO 2 Brayton-Rankine power cycle for efficient utilization of low environment temperature: A thermodynamic analysis and optimization study

Performance Analysis Of Closed Brayton Cycle System For Small Modular Reactor

EFFECTS OF COOLING SCHEMES ON THE PERFORMANCE OF SPACE CLOSED BRAYTON CYCLE

Power and Efficiency of an Irreversible Closed Intercooling Reheating and Regenerated Brayton Cycle Coupler in Tower-typed Solar Energy Thermal Power Generation

Dynamic simulation study of the start-up and shutdown processes for a recompression CO 2 Brayton cycle

Analysis on thermodynamic and economic performances of supercritical carbon dioxide Brayton cycle with the dynamic component models and constraint conditions

Impact of the Regulation Strategy on the Transient Behavior of a Brayton Heat Pump

Dynamic Modeling of the Supercritical Carbon Dioxide Simple Recuperated Brayton Cycle

Performance Analysis and Dynamic Optimization of Integrated Cooling and Power Generation System Based on Supercritical CO2 Cycle for Turbine-Based Combined Cycle Engine

Modeling and Performance Analysis of a Pre-Cooling and Power Generation System Based on the Supercritical CO2 Brayton Cycle on Turbine-Based Combined Cycle Engines

Thermodynamic feasibility and multiobjective optimization of a closed Brayton cycle-based clean cogeneration system