Abstract:The vortex-induced vibration (VIV) performance and aerodynamic mechanism of VIV control of a split three-box girder bridge were investigated numerically by Computational Fluid Dynamics (CFD). Large-scale section model wind tunnel tests show that the integrated countermeasure combined by 30% ventilation ratio grids and new scheme for maintenance tracks can effectively restrain vertical and torsional VIVs. The reliability of numerical method is verified by comparing static three-component coefficients and Strouhal numbers obtained from CFD and wind tunnel tests. The flow structure and changes of aerodynamic forces were analyzed via delayed detached-eddy simulation (DDES). For the original section, large-scale vortices form with shedding behind the safety barrier of the upstream box and behind the maintenance tracks, as well above the downstream highway box, introducing periodic pulsating lifts and moments that result in severe VIVs. The grids can effectively reduce the size of vortices in the gaps, prevent the flow from fluctuating and reduce the pressure difference between upper and lower surfaces. The torsional VIVs at non-negative attack angles are not controlled because the grids cannot interfere with the vortices behind the maintenance tracks. The new scheme for maintenance tracks, which has grid-like effects, can eliminate the torsional VIVs at non-negative attack angles by preventing the vortices behind maintenance tracks from impacting downstream boxes. The aerodynamic force components are analyzed to find that box 1 mainly contributes the mean values and box 3 mainly contributes the fluctuating values. The integrated countermeasure can reduce the mean and RMS values of aerodynamic forces to varying degrees. The streamlines and RMS pressure contours indicate that the integrated countermeasure effectively reduced the wake height and vortices motion range, which is conducive to VIV control. This work lays a solid foundation for an in-depth understanding of the aerodynamic characteristics and optimization mechanism of split three-box girder bridges.

Prediction and Suppression of Vortex-Induced Vibration for Steel Tubes with Bolted Joints in Tubular Transmission Towers

Vortex-Induced Vibration and Countermeasure of a Tubular Transmission Tower

Vortex- Induced Dynamic Response for Combined Action of Tube and Cable of Submerged Floating Tunnel

The Effect of Continuous Trapezoidal Straight Spoiler Plates on the Vortex-Induced Vibration of Wind Turbine Towers

Vortex-Induced Dynamic Response Analysis for the Submerged Floating Tunnel System under the Effect of Currents

Optimizing vortex-induced vibration suppression in π-shaped girders using wind tunnel testing and CFD analysis

Experimental investigation of thin-walled centrifugal concrete-filled steel tubes under torsion

Experimental investigation on the vortex-induced vibration of an arch steel bridge tower

Design of Thin-Walled Centrifugal Concrete-Filled Steel Tubes under Torsion

Investigation and control of vortex-induced vibration of twin box girders

Vortex-induced Vibration and Control of Split Three-Box Girder Bridges

Wind Tunnel Study on Wind-Induced Vibration Responses of a UHV Transmission Tower-Line System

Prediction on Ultimate Strength of Tube-Gusset KT-joints Stiffened by 1/4 Ring Plates Through Experimental and Numerical Study

Vibration Control of Steel Wind Turbine Tower Using a Novel Tuned Mass Damper Refitted via Inner Platform

Experimental Study and Theoretical Analysis of Ultimate Strength for Steel Tubular Joint of UHV Transmission Towers

Experimental Study of Vortex-Induced Vibration of a Twin-Tube Submerged Floating Tunnel Segment Model

A TIME DOMAIN PREDICTION METHOD FOR VORTEX-INDUCED VIBRATIONS OF A FLEXIBLE PIPE WITH TIME-VARYING TENSION

Control of vortex-induced vibrations of a curved cable-stayed bridge by ECD-TMD

Compressive behavior of stiffened steel tubes for wind turbine towers

Wind-induced Vibration Control of Long Span Transmission Tower with Suspended Mass Pendulums

Structural Vibration Suppression of Wind Turbine Based on Dynamic Vibration Absorption