Abstract:The use of renewable fuels in place of fossil fuels in internal combustion engines is regarded as a viable method for achieving zero-impact-emission powertrains. However, to achieve the best performance with these fuels, these engines require further optimization, which is achieved through new combustion strategies and the use of advanced ignition systems such as prechambers. Since simulations greatly accelerate this development, accurate simulation models are needed to accurately predict the combustion phenomenon, which requires a deep understanding of the ignition phenomenon as it significantly affects combustion. This work presents a comprehensive experimental methodology to study sparks under engine conditions, providing quantitative data to improve and validate ignition simulation models. The goal was to determine the volume generated by sparks under engine conditions that can initiate combustion and use this information to improve simulation results to match the experimental results. The visible sparks were observed with high-speed cameras to understand their time-resolved evolution and interaction with the flow. The heat transfer from the plasma was also visualized using a modified Background-Oriented Schlieren technique. The information gained from the experimental observations was used to improve an ignition simulation model. Since the velocity of the plasma was found to be slower than the surrounding flow, a user-defined parameter was included to calibrate the velocity of the simulated plasma particles. This parameter was calibrated to match the simulated spark length to the experimental spark length. In addition, since the previous simulation model did not take the heat transfer from the plasma into account, the simulated plasma particles were coupled to have heat transfer to the surroundings. Based on a comparison of the simulation results with the experimental results, the improved approach was found to provide a better physical representation of the spark ignition phenomenon.

Experimental Study on Artificial Lightning Ignition Phenomenon and Model of the Fuel Bed

Experimental Study on Flaming Ignition of Pine Needles by Simulated Lightning Discharge

Lightning-induced Smoldering Ignition of Peat: Simulation Experiments by an Electric Arc with Long Continuing Current

Interaction Between Flaming and Smouldering in Hot-Particle Ignition of Forest Fuels and Effects of Moisture and Wind

Experimental Study on the Ignition Behavior of Wildland Fuels Ignited by Heated Stainless-Steel Particles

Investigation of Mechanisms in Plasma-Assisted Ignition of Dispersed Coal Particle Streams

Experimental Investigations of Spark Ignition in A Model Combustor with Synthesis Gas

Ignition ability prediction model of biomass fuel by arc beads using logistic regression

The Influence of Different External Heating Ways on Pyrolysis and Spontaneous Ignition of Some Woods

A physics-based ignition model with detailed chemical kinetics for live fuel burning studies

Simulation analysis on the synergistic effect of vegetation ashes and charged particles on the gap electric field distortion

An effect of abrupt current disruption

Experimental Research on Heat Transfer and Ignition Characteristics of Series Fault Arc Combustion in 220VAC Power System

An experimental and computational study on the ignition process of a pulse modulated dual-RF capacitively coupled plasma operated at various low-frequency voltage amplitudes

Study on ignition of single droplet of liquid fuel in hot oxidizing atmosphere

Optical Investigation of Sparks to Improve Ignition Simulation Models in Spark-Ignition Engines

Smoldering and Spontaneous Transition to Flaming over Horizontal Cellulosic Insulation

Experimental and Simulation Study on Ignition of Hydrogen Jet by Electric Sparks and Hot Surfaces

Transition from Smouldering to Flaming Combustion of Pine Needle Fuel Beds under Natural Convection

Long-gap ignition using femtosecond laser filament-triggered discharge

An Integral Model for Wood Auto-ignition under Variable Heat Flux