Carbon-doping-induced Energy-Band Modification and Vacancies in SnS2 Nanosheets for Room-Temperature Ppb-Level NO2 Detection

Ruozhen Wu,Juanyuan Hao,Tingting Wang,Shengliang Zheng,You Wang

DOI: https://doi.org/10.1039/d1qi00930c

IF: 7.779

2021-01-01

Inorganic Chemistry Frontiers

Abstract:Carbon-doping mediated synergistic effect of energy-band modification and vacancy provides a new solution for developing high-performance LMDs-based gas sensors.

What problem does this paper attempt to address?

Bioinspired supramolecular arrayed heterojunction-based room-temperature sensor for high-performance gas detection

Yang Li,Ranran Zhang,Fei Wen,Mingchao Li,Wenjun Li,Lili Li,Yang Zhou,Sigal Rencus-Lazar,Kai Tao,Ehud Gazit,Wei Wu,Zhihua Ying,Gaofeng Wang

DOI: https://doi.org/10.1016/j.snb.2023.134641

2023-01-01

Abstract:Nitrogen dioxide (NO2) has been severely polluting the atmosphere and deteriorating human beings' sustainable lives. Therefore, development of gas sensors for high-selectivity and high-sensitivity detection of NO2 has been attracting increasing attention. The state-of-the-art inorganic NO2 gas sensors require harsh fabrication conditions or toxic materials, making the devices intrinsically eco-unfriendly. Furthermore, in most cases the sensors work at high temperatures. These disadvantages severely impede their practical applications. Herein, we report a room-temperature and highly-integrated NO2 sensor composed of p-type self-assembled peptide fibrillar nanoforests (SPNFs) scaffolded with n-type SnO2 nanoparticles (NPs) heterojunctions. The p-n conformations provide efficient access to target gases and allow reliable electron transformations, while the SPNFs afford a large specific surface area and multiporous structures for gas adsorption and SnO2 NPs dispersion, resulting in an ultrahigh selectivity for NO2 detection. Especially, the sensing performance can be optimized by modulating the thickness and density of the SPNFs, showing a high response, short response and recovery times, along with a low detection limitation. Our strategy demonstrates the development of a bioinspired platform by utilizing peptide selfassemblies to fabricate integrated sensors for polluting gas detections.
Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

Qi Sun,Kaidi Diao,Tulai Sun,Maozhong Li,Xudong Cui,He Tian,Bin Xiang

DOI: https://doi.org/10.1039/c6ra21672b

IF: 4.036

2016-01-01

RSC Advances

Abstract:Semiconductor tin oxide (SnO2) is acknowledged to be one of the semiconductor oxides with most potential for utilization as nitrogen dioxide (NO2)-sensor materials. However, the challenge to improve the gas sensitivity still remains, and this limits the full realization of the SnO2 sensor potential. In this paper, enhanced gas sensitivity obtained by the formation of a SnO2/niobium pentoxide (Nb2O5) hybrid structure is reported. As the NO2 concentration is lower to 3 ppm, the measured resistance in the SnO2/Nb2O5-based sensor is still 2.5 times larger than that in a pristine SnO2-based sensor. With an increase in the NO2 concentration, the response time of the SnO2/Nb2O5-based sensor decreases sharply whereas the pristine SnO2-based sensor response time increases. The enhanced performance is attributed to the presence of more oxygen vacancies and a higher specific surface area in the hybrid structure induced by the introduction of Nb2O5. These results provide some general guidelines for the selection of compositions to enhance the sensor performance.
The Synergy of Pd Nanoparticles and Oxygen Vacancy to Modulate SnO2 Modified Reduced Graphene Oxide Hybrids for Room-Temperature Ppb-Level NO2 Detection

Yaqing Zhang,Zhimin Yang,Liang Zhao,Yunpeng Xing,Congcong Xin,Zefeng Wei,Teng Fei,Sen Liu,Tong Zhang

DOI: https://doi.org/10.1016/j.apsusc.2023.157146

IF: 6.7

2023-01-01

Applied Surface Science

Abstract:Reduced graphene oxides (RGO)-based materials exhibit high carrier mobility and selective recognition ability to NO2, making them constitute promising platform for room-temperature NO2 detection. However, the low sensitivity becomes the main bottleneck for their further development. Here, we demonstrate that synergy of Pd nanoparticles (NPs) and oxygen vacancies can modulate the surface active sites over SnO2 NPs modified RGO hybrids (labeled as SR), leading to improving the sensitivity of room-temperature NO2 sensors. Experimentally, a wet-chemical method was used to introduce oxygen vacancies onto SR, leading to forming SR with rich oxygen vacancies (labeled as SR-Vo), which were subsequently deposited with Pd NPs, resulting in preparing Pd NPs loaded SR-Vo hybrids (labeled as Pd-SR-Vo). Impressively, the response value to 1 ppm NO2 of Pd-SR-Vo hybrids reaches to 9.8, which is much higher than that of R-Vo hybrids (5.6) and SR hybrids (3.3). The improvement of sensitivity toward NO2 for Pd-SR-Vo hybrids is attributed to the synergy effect of Pd NPs and oxygen vacancies, including shortening the band gap of Pd-SR-Vo hybrids with raising conduction band level, widening the width of electron depletion layer between SnO2-Vo and RGO, introducing Schottky contact between Pd and SnO2-Vo, improving efficiency for gas sensing reaction. This work not only provides an efficient approach to fabricate highperformance NO2 sensors, but also opens a new avenue for sensing materials design and modification.
N-Doped Carbon Dots/Sns2 Heterostructures for Ultra-Fast and Sub-Ppb-Level Detection of No2 in Multiple Environments

Ping Guo,Xinxin He,Xuyang An,Xingyu Zhang,Shuai Liang,Jia Zhang,Yongqing Fu

DOI: https://doi.org/10.1016/j.cej.2024.156882

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Nitrogen dioxide (NO2) 2 ) is one of the most common toxic gases, which not only impairs human health but also produces secondary pollutants induced by sunlight via associated photochemical reactions. Herein, we design a high-performance NO2 2 sensor based on the N-doped carbon dots/SnS2 2 (N-CDs/SnS2) 2 ) heterostructure using density functional theory (DFT) calculations. The DFT results approve that the decoration of N-doped carbon dots (N-CDs) onto the SnS2 2 nanosheet enhances adsorption capacity and electron transportation compared with those of pure SnS2, 2 , significantly enhancing the sensing responses. In addition, these in-situ synthesized N-CDs onto SnS2 2 nanosheet leads to band alignment, thereby significantly improves conductivity and enhances transportation and storage properties of carriers via a synergistic interaction. Furthermore, employment of UV illumination significantly increases active adsorption sites and enhances response and recovery kinetics. As a result, the developed NO2 2 sensor achieves fast responses of a few seconds and a limit of detection down to sub-ppb-level with the help of UV illumination. It also shows good linearly, operated in both air and oxygen-free environments, at both room or low temperature (238 K) conditions. The developed multi-framework offers an efficient and precision detection of NO2 2 with ultrafast responses and ultralow concentrations in multiple environments.
2D/2D Heterojunction of G-C3n4/sns2: Room-Temperature Sensing Material for Ultrasensitive and Rapid-Recoverable NO2detection

Quan Sun,Juanyuan Hao,Shengliang Zheng,Peng Wan,Jialu Li,Di Zhang,Yanqiu Li,Tingting Wang,You Wang

DOI: https://doi.org/10.1088/1361-6528/aba05b

IF: 3.5

2020-01-01

Nanotechnology

Abstract:Heterojunction engineering plays an indispensable role in improving gas-sensing performance. However, rational heterojunction engineering to achieve room-temperature NO2 sensing with both high response and rapid recovery is still a challenge. Herein, a 2D/2D heterojunction of g-C3N4/SnS2 is designed to improve the sensing performance of SnS2 and used for ultrasensitive and rapid-recoverable NO2 detection at room temperature. The pristine SnS2 fails to work at room temperature because of its high resistivity and weak adsorption to NO2. After combination with g-C3N4 nanosheets, the g-C3N4/SnS2-based sensor exhibits an extremely high response (503%) and short recovery time (166 s) towards 1 ppm NO2 at room temperature. The improved sensing performance is primarily attributed to the increased adsorption sites and enhanced charge transfer induced by the 2D/2D heterojunctions with large interface contact area. This achievement of g-C3N4/SnS2 2D/2D heterostructures demonstrates a promising pathway for the design of sensitive gas-sensing material based on a 2D/2D heterojunction strategy.
Two-dimensional Cd-doped Porous Co3O4 Nanosheets for Enhanced Room-Temperature NO2 Sensing Performance

Xinwei Chen,Shuai Wang,Chen Su,Yutong Han,Cheng Zou,Min Zeng,Nantao Hu,Yanjie Su,Zhihua Zhou,Zhi Yang

DOI: https://doi.org/10.1016/j.snb.2019.127393

2020-01-01

Abstract:P-type Co3O4 has received ever-growing interest as a promising gas-sensing material due to the unique advantages of low-cost, earth abundance and considerable electrical conductivity at relatively low temperature. Herein, we designed and fabricated two-dimensional (2D) Cd-doped porous Co3O4 nanosheets through a microwave-assisted solvothermal method and subsequently in-situ annealing process. It is found that as-prepared 5 %-Cd-Co3O4-based gas sensor shows a significantly improved response value of 3.38 (R-a/R-g) and a relatively lower recovery time of 620 s for NO2 detection at room temperature (25 degrees C). Additionally, the sensor displays a wide detection range for NO2 detection low to 154 ppb (low theoretical limit of detection), outstanding selectivity compared with some volatile organic compounds, and excellent long-term stability for 6 months. The results of experiments and the corresponding Lewis acid-base theory reveal that the excellent room-temperature sensing performance is mainly promoted by the Cd dopant through a combined set of factors, including enhanced electronic conductivity, increased oxygen vacancy concentration and formed Co2+-O-2(-center dot) to improve NO2 adsorption. However, the further increased concentration of Cd2+ as Lewis acid sites will decrease the adsorption of NO2 that can benefit for improving recovery performance. Thus, the demonstration of such 2D Cd-doped porous Co3O4 nanosheets provides valuable insights for the p-type metal oxide semiconductor-based room-temperature gas sensors.
Interface Engineered WS2/ZnS Heterostructures for Sensitive and Reversible NO2 Room Temperature Sensing

Yutong Han,Yang Liu,Chen Su,Shutang Wang,Hong Li,Min Zeng,Nantao Hu,Yanjie Su,Zhihua Zhou,Hao Wei,Zhi Yang

DOI: https://doi.org/10.1016/j.snb.2019.126666

IF: 9.221

2019-01-01

Sensors and Actuators B Chemical

Abstract:The inherent high surface areas and unique semiconducting properties of two-dimensional (2D) transition metal dichalcogenides (TMDs) make them attractive for the sensing applications. However, the challenges of sensitivity, recoverability and stability still need to be overcome for the rapidly developing fields of TMD based gas sensors. With the general advantages of 2D nanomaterials, construction of 2D TMD based heterostructure is an effective approach for improving their sensing performance by the synergistic effects of hybridization. Herein, we design a novel tungsten disulfide (WS2)/zinc sulfide (ZnS) based TMD heterostructure to realize quick and reversible nitrogen dioxide (NO2) detection at room temperature (25 degrees C). Specifically, the engineered 2D/0D WS2/ZnS p-n heterostructure gives a desired response of 32.5 to 5 ppm NO2 with a fast response speed of 4 s, which is dramatically enhanced compared with that of pure WS2 nanosheets. More importantly, WS2/ZnS heterostructure based gas sensor can achieve full recovery state after each sensing cycle without using external energies, showing an excellent recyclability at room temperature. The optimal sensor also exhibits low detection concentration of 10 ppb, high selectivity as well as outstanding long-term stability. Such impressive features originating from the synergistic effects of WS2/ZnS heterostructure have been discussed in detail from the geometrical, electronic and chemical effects. These outstanding sensing properties of WS2/ZnS heterostructure sensor imply the possibility of using this novel nanostructure in highly efficient NO2 room temperature sensing applications.
Enhanced Room Temperature NO2 Sensing Performance Based on N-doped Carbon Nanosheets@zno Nanoplates by Morphology Transition and White Light Illumination

Jing Hu,Chenming Yin,Shouxi Xu,Miao Cheng,Tao Wei,Qianqian Liu,Wanfei Li,Yun Ling,Yafei Zhang,Bo Liu

DOI: https://doi.org/10.1016/j.apsusc.2022.153980

IF: 6.7

2022-01-01

Applied Surface Science

Abstract:Highly-sensitive gas sensors operating at room temperature (RT) have been pursued by researchers due to their high security, energy saving and long-term stability. Herein, N-doped carbon nanosheets-incorporated zinc oxide (NCZ) was synthesized via solution calcination combined with hydrothermal method and utilized for ppb level detection of NO(2 )at RT. Intriguingly, the construction of N-doped carbon nanosheets was accompanied by generation of ZnO nanoparticles, and then be transferred into mesoporous nanoplates. The as-synthesized NCZ (120)-300 nanocomposites demonstrated high sensitivity to 3 ppm NO2 (|R-g-R-0|/R-0=~ 28.2), along with fast response/recovery (60 s/129 s) speed, excellent selectivity and cyclic stability. In particular, the morphology transition of ZnO greatly enhanced the RT NO2 sensing performance of the as-prepared sensor. Meanwhile, the white light illumination further ameliorated the sensor's properties involving ~ 2.1 times enhancement of sensitivity and shorter recovery process (accelerated from 563 s to 129 s). These enhancements are ascribed to the heterostructure between ZnO nanoplates and N-doped carbon nanosheets, and the modulation of electron structure by photo-generated electron-hole pairs. In addition, the 2D N-doped carbon nanosheets and mesoporous ZnO nanoplates offer numerous active adsorption-sites, which improved the surface chemical activity of NCZ(120)-300.
Synergistic Effect of Electron Scattering and Space Charge Transfer Enabled Unprecedented Room Temperature NO2 Sensing Response of SnO2 (Small 48/2023)

Yajie Zhang,Yadong Jiang,Zhen Yuan,Bohao Liu,Qiuni Zhao,Qi Huang,Ziteng Li,Wen Zeng,Zaihua Duan,Huiling Tai

DOI: https://doi.org/10.1002/smll.202370406

IF: 13.3

2023-11-29

Small

Abstract:NO2 Sensors In article number 2303631, Wen Zeng, Zaihua Duan, Huiling Tai, and co‐workers propose an enhanced gas sensing strategy based on the synergistic effect of electron scattering and space charge transfer, and verify it by designing porous SnO2 nanoparticles assembled from ultra‐small grains, achieving unprecedented NO2 gas sensing performance at room temperature. This work provides an innovative approach for developing high‐performance and low‐power gas sensors.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Highly sensitive and recoverable room-temperature NO2 gas detection realized by 2D/0D MoS2/ZnS heterostructures with synergistic effects

Chao Liu,Xinwei Chen,Hanyu Luo,Bolong Li,Jia Shi,Chao Fan,Jianhua Yang,Min Zeng,Zhihua Zhou,Nantao Hu,Yanjie Su,Zhi Yang

DOI: https://doi.org/10.1016/j.snb.2021.130608

2021-01-01

Abstract:Two-dimensional (2D) transition metal dichalcogenides (TMDs) have received emerging attention due to their rich active sites, layered structure, and suitable electronic structure for gas sensing at room temperature (25 degrees C). However, the sensitivity, recoverability, stability and selectivity of TMDs-based gas sensors have remained a grand challenge. Herein, a novel 2D/0D molybdenum disulfide (MoS2)/zinc sulfide (ZnS) based gas sensor was rationally designed via a two-step solution process, enabling high-performance detection of nitrogen dioxide (NO2) gas at room temperature. Specifically, the MoS2/ZnS heterostructures manifest a greatly enhanced response performance (S = 7.2) to 5 ppm NO2 in comparison with the bare MoS2 nanosheets. The gas sensor can be completely recovered after re-exposing to the air for 4.6 min at room temperature without using any external auxiliary treatments. Our optimized gas sensor not only exhibits an ultra-low theoretical limit of detection (14 ppb), but also shows an ultrahigh selectivity and outstanding stability. We further showed that the greatly enhanced gas sensing performance of 2D/0D MoS2/ZnS can be ascribed to the unique structure as well as the synergistic effects between MoS2 nanosheets and ZnS nanoparticles from the geometrical, charge transfer, equivalent resistance, and chemical aspects. This work provides a promising approach to the fabrication of high-performance gas sensing materials for environmental monitoring at room temperature.
Enhancing NO2 Detection Ability of Surface Acoustic Wave Sensors with ZnO-Decorated N-doped Porous Carbon Nanosheets

Xue Li,Yuan Feng,HF Lu,Junjie Shi,Yuanjun Guo,Sean Li,Xiaotao Zu

DOI: https://doi.org/10.1039/d4tc03690e/v2/review1

IF: 6.4

2024-10-29

Journal of Materials Chemistry C

Abstract:Effective detection to nitrogen dioxide (NO2) is crucial for environmental safety and human health. Gas sensors utilizing surface acoustic wave (SAW) technology hold significant promise for detecting hazardous gases, but their performance heavily depends on the intrinsic properties of the sensing layer materials. In this study, we elaborate on ZnO nanoparticles-dispersed N-doped porous carbon nanosheets (ZnO@N-PCNs) for SAW sensors aimed at achieving rapid NO2 detection at room temperature. The resultant ZnO@N-PCNs SAW gas sensor exhibits a significant frequency shift of approximately -4.4 kHz, which is much higher than that of the pristine N-PCNs SAW sensor at a NO2 concentration of 20 ppm. It responds quickly when exposed to NO2 gas, and demonstrates specific selectivity and good reproducibility in both the short and long term. This work reveals the sensing properties of ZnO-optimized SAW sensors and provides valuable guidance for the development of high-sensitivity SAW sensors.

materials science, multidisciplinary,physics, applied
Unraveling the promoted nitrogen dioxide detection performance of N-doped SnO2 microspheres at low temperature

Wenjing Du,Wenxu Si,Wenzheng Du,Tianhong Ouyang,Fenglong Wang,Mengjiao Gao,Lili Wu,Jiurong Liu,Zhao Qian,Wei Liu

DOI: https://doi.org/10.1016/j.jallcom.2020.155209

IF: 6.2

2020-09-01

Journal of Alloys and Compounds

Abstract:Nitrogen doping has been proven an efficient strategy to modulate the electronic structure of metal oxides to tune their properties. Herein, we report the synthesis of N-doped SnO2 microspheres through calcining the pristine SnO2 in NH3 atmosphere. Texture characterizations show that N–SnO2 microspheres exhibit 3D-porous architectures with a diameter of ca. 300–500 nm. After NH3 treatment, the SnO2 exhibits the formation of the N-doping and oxygen vacancies on the surface of the material, rich free-electrons and the narrow energy band. It is found that the as-prepared N-doped SnO2 microspheres at 200 °C (N–SnO2-200), show superior selectivity and high response (S = 155 to 5 ppm NO2) compared with its counterparts. DFT calculations and experimental results illustrate that N impurities and oxygen vacancies as N-induced active sites favor the adsorption of NO2 molecules; rich free-electrons increase the amount of adsorbed NO2 molecules; and the narrow energy band promotes the effectively electron transfer during the sensing reaction. Therefore, in this work we unravel the improved NO2 gas-sensing performances of the N-doped SnO2 and provide new guidance for the development of highly efficient metal oxide sensing materials for NO2 detection.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Pd@Pt Core-Shell Nanocrystal-Decorated ZnO Nanosheets for ppt-Level NO2 Detection

Chengming Sui,Mingxue Zhang,Yueyue Li,Yilin Wang,Yuanzhen Liu,Ziqi Liu,Jihao Bai,Fengmin Liu,Geyu Lu

DOI: https://doi.org/10.1021/acssensors.3c02702

2024-04-26

Abstract:Bimetallic nanocrystals (NCs) have obtained significant attention due to their unique advantages of the intrinsic properties of individual metals and synergistic enhancements resulting from the electronic coupling between two constituent metals. In this work, Pd@Pt core-shell NCs were prepared through a facile one-pot solution-phase method, which had excellent dispersion and uniform size. Concurrently, ZnO nanosheets were prepared via a hydrothermal method. To explore their potential in nitrogen dioxide (NO2) gas sensing applications, sensitive materials based on ZnO nanosheets with varying mass percentages of Pd@Pt NCs were generated through an impregnation process. The sensor based on 0.3 wt % Pd@Pt-ZnO exhibited remarkable performance, demonstrating a substantial response (Rg/Ra = 60.3) to 50 ppb of NO2 at a low operating temperature of 80 °C. Notably, this sensor reached an outstanding low detection limit of 300 ppt. The enhancement in gas sensing capabilities can be attributed to the sensitization and synergistic effects imparted by the exceptional catalytic activity of Pd@Pt NCs, which significantly promoted the reaction. This research introduces a novel approach for the utilization of core-shell structured bimetallic nanocrystals as modifiers in metal-oxide-semiconductor (MOS) materials for NO2 detection.
ZnIn 2 S 4 Nanosheets for Efficient NO 2 Detection at Room Temperature: Insights into the Role of Sulfur Vacancies

Chenyu Wang,Xiao Chang,Xianghong Liu,Jun Zhang

DOI: https://doi.org/10.1021/acs.jpclett.4c00919

IF: 6.888

2024-05-29

The Journal of Physical Chemistry Letters

Abstract:Engineering atomic vacancies in metal sulfide semiconductors allows for the efficient tuning of their electronic and chemical properties. In this work, we synthesized hollow tubular structures constructed by bimetallic ZnIn(2)S(4) using a metal-organic framework (MOF) as the template. We found that the sulfur vacancies in ZnIn(2)S(4) enabled extremely fast NO(2) detection with high response at room temperature (RT), and the material with high sulfur vacancy content delivers a 2 times higher...

chemistry, physical,physics, atomic, molecular & chemical,nanoscience & nanotechnology,materials science, multidisciplinary
UV-activated WS2/SnO2 2D/0D Heterostructures for Fast and Reversible NO2 Gas Sensing at Room Temperature

Yi Xia,Lei Xu,Sufang He,Liexing Zhou,Mingjun Wang,Jing Wang,Sridhar Komarneni

DOI: https://doi.org/10.1016/j.snb.2022.131903

IF: 9.221

2022-01-01

Sensors and Actuators B Chemical

Abstract:2D Transition metal dichalcogenide (TMDs) has been recognized as a potential candidate for constructing wearable and safe room temperature gas sensor. Especially, the heterostructures of TMDs/ metal oxide semiconductors (MOS) have been proved to be potential candidates as NO2 sensors at room temperature. However, the response/recovery rate and reversibility of the sensors is still not satisfactory due to the inefficient charge transfer on TMDs/MOS hetero-interface. In this study, SnO2 quantum dots (QDs) were simply decorated on the surface of few or single layer WS2 nanosheets to form 2D/0D heterostructures via a facile room temperature aqueous solution process and self-assembly method. The 2D/0D WS2/SnO2 heterostructure-based optoelectronic gas sensor showed fast response/recovery rates and full reversibility to NO2 at room temperature with enhanced response. The remarkable improvement in NO2 sensing was because of the efficient interfacial charge separation rendered by 2D/0D heterostructures under ultraviolet illumination. Therefore, this study points out a potential strategy for the design of light-enhanced gas sensing materials.
SnS2 Quantum Dot-Based Optoelectronic Flexible Sensors for Ultrasensitive Detection of NO2 Down to 1 Ppb

Yifan Huang,Weicheng Jiao,Zhenming Chu,Xinmiao Nie,Rongguo Wang,Xiaodong He

DOI: https://doi.org/10.1021/acsami.0c05240

IF: 9.5

2020-01-01

ACS Applied Materials & Interfaces

Abstract:Transition-metal dichalcogenides (TMDs) have gained intense interest for their outstanding optoelectronic and electrochemical characteristics, utilized in versatile applications such as gas sensors and photodetectors. However, TMD-based chemiresistors suffer from poor sensitivity at ppb-level detection, and the experimental detection limit fails to reach 1 ppb. Herein, SnS2 QD/graphene nanoheterostructures as functional flexible sensors are fabricated for NO2 gas and light detection at room temperature. The semiconductor type of the nanohybrids can be shifted between p-type and n-type by adjusting the proportion of the components, both of which exhibit excellent gas-sensing properties. The ppb-level NO2 detection is realized even under room temperature with superior sensitivity (860% to 125 ppb), fast response (114 s), and recovery (166 s). It also demonstrates ultrahigh sensitivity and broadband photodetection in the visible region. The photoresponsivity can reach upto 2.08 × 103 A/W under blue light illumination and under room temperature. Especially, the influence of light illumination of different wavelengths and intensities on gas-sensing performance is studied. Red light (1 mW/cm2) greatly enhances the sensitivity up to 5.1 folds, and the device performs obvious response to NO2 at concentrations as low as 1 ppb. Ab initio density functional theory calculation and band theories are applied to explain the interaction of the components and the effect of the light excitation inducing charge carriers on gas-sensing equilibrium.
Synergistic Effect of Charge Transfer and Interlayer Swelling in V2CTx/SnS2 Driving Ultrafast and Highly Sensitive NO2 Detection at Room Temperature

Yajie Zhang,Yi Li,Yadong Jiang,Zaihua Duan,Zhen Yuan,Bohao Liu,Qi Huang,Qiuni Zhao,Yajie Yang,Huiling Tai

DOI: https://doi.org/10.1016/j.snb.2024.135788

2024-01-01

Abstract:Transition metal carbides/nitrides (MXenes) have shown great potential in room temperature (RT) gas sensors, but the self-stacking of MXene sheets limits their sensitivity and response/recovery speed. In addition, the poor selectivity of MXenes sensors caused by the conventional single sensing mechanism remains a challenge. Herein, a synergistic effect of charge transfer and interlayer swelling is proposed to comprehensively improve the gas sensing performance of the MXenes toward oxidizing NO2. To this end, a resistive gas sensor is prepared by combining the accordion-like V2CTx MXene and n-type SnS2 nanoplates. The results reveal that the NO2 sensitivity of the V2CTx/SnS2 sensor is enhanced by 581.6 times compared to the pristine V2CTx sensor, while achieving ultrafast response and recovery speeds (4.8/4.7s) at 25 °C under 51.9% relative humidity. Furthermore, the V2CTx/SnS2 sensor exhibits excellent selectivity (response ratio > 5) to NO2. The outstanding gas sensing performances can be attributed to the synergistic sensing of charge transfer and interlayer swelling, unique structure and more active sites. This work expands the gas sensing application of the V2CTx MXene and promotes the in-depth combination of multiple sensing mechanisms, opening an effective avenue for developing high-performance RT NO2 sensors.
The Sensitizing Effect of Enhanced NO2 Gas Sensing at Near-Room Temperature Using Pd-Decorated VO2 Nanowires

Shuai Liu,Jiale Xue,Yinggang Liu,Yan Cui,Jie Qiu,Ruojun Xu,Guoxiang Chen

DOI: https://doi.org/10.1007/s11664-023-10878-w

IF: 2.1

2024-01-10

Journal of Electronic Materials

Abstract:Modification of nanostructures using metal nanoparticles is an efficient strategy for enhancing the performance of gas sensing. In this paper, a VO 2 @Pd nanowires gas sensor was synthesized using a combination of hydrothermal and annealing methods. The content of Pd in the as-prepared products was successfully controlled by adjusting the reaction parameters. The morphology and formation mechanism of VO 2 nanostructures were systematically evaluated. The response value of VO 2 @Pd nanowires is 31.94 towards 5 ppm of NO 2 , which is about 38.75% higher than that of pristine VO 2 at a relatively low temperature of 50°C. Furthermore, the sensor exhibits good selectivity, excellent response/recovery time, and superior stability towards NO 2 . The significant enhancement of NO 2 sensing performance could be attributed to the electronic and chemical sensitization. Density functional theory (DFT) simulation suggests that both the adsorption energy and electron transfer between the VO 2 @Pd substrate and NO 2 molecules are optimized synergistically, leading to the improved sensitivity of the gas sensor. Importantly, the strong orbital hybridization between the NO 2 molecule and Pd atom is observed according to density of states (DOS), which is beneficial in selectively improving the NO 2 sensing performance of the VO 2 @Pd gas sensor.

engineering, electrical & electronic,materials science, multidisciplinary,physics, applied
In-situ Construction of SnO2 Nanolayer-Sns2 Nanosheets Heterostructures for Enhanced NO2 Sensing at Room Temperature and Their DFT Investigation

Jinzhou Bai,Sikai Zhao,Wenxin Wang,Meili Wu,Hong Xiao,Wenbao Liu,Zhenyu Yuan,Fanli Meng,Yanbai Shen

DOI: https://doi.org/10.1016/j.jallcom.2024.176616

IF: 6.2

2024-01-01

Journal of Alloys and Compounds

Abstract:Traditional NO2 sensors based on metal oxide semiconductors suffer from high power consumption, creating a pressing demand for novel NO2 sensors operating at room temperature. Motivated by this, SnO2 nanolayer modified SnS2 nanosheets heterostructures were successfully prepared through an in-situ synthesis process by mildly annealing pure SnS2 nanosheets for NO2 detection at room temperature. The SnO2 oxidation nanolayer was formed on the SnS2 nanosheets with an average thickness of 14 nm. The optimal sensor based on the obtained heterostructures achieves a high response of 6.0-1 ppm NO2 at room temperature of 25 degrees C. The designed sensor also exhibits excellent repeatability, selectivity, and long-term stability. Furthermore, the density functional theory calculations proved that the presence of SnO2 nanolayer promoted NO2 adsorption capacity of SnS2 nanosheets, thereby enhancing the sensing performance. The extraordinary gas sensing performance was ascribed to enhanced specific surface area and n-n heterojunction built between the SnO2-SnS2 interface. The novel SnO2 nanolayer-SnS2 nanosheets heterostructures offer a promising candidate for high-performance room-temperature NO2 sensors.
Synergically Engineering Defect And Interlayer In Sns2 For Enhanced Room-Temperature No2 Sensing

Quan Sun,Zhongmiao Gong,Yijian Zhang,Juanyuan Hao,Shengliang Zheng,Wen Lu,Yi Cui,Lizhao Liu,You Wang

DOI: https://doi.org/10.1016/j.jhazmat.2021.126816

IF: 13.6

2022-01-01

Journal of Hazardous Materials

Abstract:Defect and interlayer engineering are considered as two promising strategies to alter the electronic structures of sensing materials for improved gas sensing properties. Herein, ethylene glycol intercalated Al-doped SnS2 (EG-Al-SnS2) featuring Al doping, sulfur (S) vacancies, and an expanded interlayer spacing was prepared and developed as an active NO2 sensing material. Compared to the pristine SnS2 with failure in detecting NO2 at room temperature, the developed EG-Al-SnS2 exhibited a better conductivity, which was beneficial for realizing the room-temperature NO2 sensing. As a result, a high sensing response of 410% toward 2 ppm NO2 was achieved at room temperature by using the 3% EG-Al-SnS2 as the sensing material. Such outstanding sensing performance was attributed to the enhanced electronic interaction of NO2 on the surface of SnS2 induced by the synergistic effect of Al doping, S vacancies, and the expanded interlayer spacing, which is directly revealed by the in-suit measurement based on near-ambient pressure X-ray photoelectronic spectroscopy (NAP-XPS). Furthermore, to identify the role of Al doping, S vacancies, and the expanded interlayer spacing in enhancing the NO2 sensing properties, a series of comparative experiments and theoretical calculations were performed.

Carbon-doping-induced Energy-Band Modification and Vacancies in SnS2 Nanosheets for Room-Temperature Ppb-Level NO2 Detection

Bioinspired supramolecular arrayed heterojunction-based room-temperature sensor for high-performance gas detection

Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

The Synergy of Pd Nanoparticles and Oxygen Vacancy to Modulate SnO2 Modified Reduced Graphene Oxide Hybrids for Room-Temperature Ppb-Level NO2 Detection

N-Doped Carbon Dots/Sns2 Heterostructures for Ultra-Fast and Sub-Ppb-Level Detection of No2 in Multiple Environments

2D/2D Heterojunction of G-C3n4/sns2: Room-Temperature Sensing Material for Ultrasensitive and Rapid-Recoverable NO2detection

Two-dimensional Cd-doped Porous Co3O4 Nanosheets for Enhanced Room-Temperature NO2 Sensing Performance

Interface Engineered WS2/ZnS Heterostructures for Sensitive and Reversible NO2 Room Temperature Sensing

Enhanced Room Temperature NO2 Sensing Performance Based on N-doped Carbon Nanosheets@zno Nanoplates by Morphology Transition and White Light Illumination

Synergistic Effect of Electron Scattering and Space Charge Transfer Enabled Unprecedented Room Temperature NO2 Sensing Response of SnO2 (Small 48/2023)

Highly sensitive and recoverable room-temperature NO<sub>2</sub> gas detection realized by 2D/0D MoS<sub>2</sub>/ZnS heterostructures with synergistic effects

Enhancing NO2 Detection Ability of Surface Acoustic Wave Sensors with ZnO-Decorated N-doped Porous Carbon Nanosheets

Unraveling the promoted nitrogen dioxide detection performance of N-doped SnO2 microspheres at low temperature

Pd@Pt Core-Shell Nanocrystal-Decorated ZnO Nanosheets for ppt-Level NO2 Detection

ZnIn 2 S 4 Nanosheets for Efficient NO 2 Detection at Room Temperature: Insights into the Role of Sulfur Vacancies

UV-activated WS2/SnO2 2D/0D Heterostructures for Fast and Reversible NO2 Gas Sensing at Room Temperature

SnS2 Quantum Dot-Based Optoelectronic Flexible Sensors for Ultrasensitive Detection of NO2 Down to 1 Ppb

Synergistic Effect of Charge Transfer and Interlayer Swelling in V2CTx/SnS2 Driving Ultrafast and Highly Sensitive NO2 Detection at Room Temperature

The Sensitizing Effect of Enhanced NO2 Gas Sensing at Near-Room Temperature Using Pd-Decorated VO2 Nanowires

In-situ Construction of SnO2 Nanolayer-Sns2 Nanosheets Heterostructures for Enhanced NO2 Sensing at Room Temperature and Their DFT Investigation

Synergically Engineering Defect And Interlayer In Sns2 For Enhanced Room-Temperature No2 Sensing