Abstract:In the actual industrial production process, the method of adaptively tuning proportional–integral–derivative (PID) parameters online by neural network can adapt to different characteristics of different controlled objects better than the controller with PID. However, the commonly used microcontroller unit (MCU) cannot meet the application scenarios of real time and high reliability. Therefore, in this paper, a closed-loop motion control system based on BP neural network (BPNN) PID controller by using a Xilinx field programmable gate array (FPGA) solution is proposed. In the design of the controller, it is divided into several sub-modules according to the modular design idea. The forward propagation module is used to complete the forward propagation operation from the input layer to the output layer. The PID module implements the mapping of PID arithmetic to register transfer level (RTL) and is responsible for completing the output of control amount. The main state machine module generates enable signals that control the sequential execution of each sub-module. The error backpropagation and weight update module completes the update of the weights of each layer of the network. The peripheral modules of the control system are divided into two main parts. The speed measurement module completes the acquisition of the output pulse signal of the encoder and the measurement of the motor speed. The pulse width modulation (PWM) signal generation module generates PWM waves with different duty cycles to control the rotation speed of the motor. A co-simulation of Modelsim and Simulink is used to simulate and verify the system, and a test analysis is also performed on the development platform. The results show that the proposed system can realize the self-tuning of PID control parameters, and also has the characteristics of reliable performance, high real-time performance, and strong anti-interference. Compared with MCU, the convergence speed is far more than three orders of magnitude, which proves its superiority.

Design of an IMCPID Optimized Neural Network for Stepless Flow Control of Reciprocating Mechinery

Single neuron predictive pid control

Different‐factor Compact‐form Model‐free Adaptive Control with Neural Networks for MIMO Nonlinear Systems

An Improved Partial-Form MFAC Design for Discrete-Time Nonlinear Systems with Neural Networks

Multiloop Nonlinear IMC Strategy Design under PLS Framework Using ARX-neural Network Model

Multi-loop nonlinear internal model controller design under nonlinear dynamic PLS framework using ARX-neural network model

Neural network based iterative learning predictive control design for mechatronic systems with isolated nonlinearity

Multi-loop Adaptive Internal Model Control Based on a Dynamic Partial Least Squares Model

Multi-loop Internal Model Controller Design Based on a Dynamic PLS Framework

Neural Network Based Multi-Step Predictive Control for Nonlinear Systems

Fuzzy PID Controller Design for a Permanent Magnet Linear Synchronous Motor Feeding System

Multiobjective Optimization for Controller Design

Design of nonlinear optimization PID controller for BLDCM based on neuro-fuzzy identified model

Optimization-based Adaptive Neural Sliding Mode Control for Nonlinear Systems with Fast and Accurate Response under State and Input Constraints

Design Of Model Predictive Controller Based On Neural Systems

An improved control strategy of single neuron PID

Neuron Model-Free Pid Control

A Design of FPGA-Based Neural Network PID Controller for Motion Control System

Neural-Network-Based Predictive Control for PMSM Drives

Application of IMC-PID Controller in Hydraulic Automatic Position Control System of Mill

PID Adaptive Feedback Motor System Based on Neural Network