Abstract:Graphene-gold nanohybrids have become a hot research topic in material science, because the hybridization can be an effective strategy to enhance the functionality of materials and the integration of nanomaterials on graphene nanosheets potentially paves a new way to improve their electronic, chemical and electrochemical properties. The study reported a novel graphene-gold nanohybrid with excellent electrocatalytic performance for electrochemical detection of glucose. First, the monodisperse gold nanoparticles (GNs) were prepared via the citrate reduction associated with pH-shifting. The resulting GNs give an average particle size of 6 nm and narrow size distribution. Then, one part of the GN solution was mixed with the graphite oxide solution, which followed by the ascorbic acid reduction and unidirectional freeze-drying to prepare graphene aerogel@GNs (GA@GNs). The formed GA@GNs offers a well-defined three-dimensional and orientated porous structure. In addition, the most of GNs in the aerogel was embedded in the intertwined graphene sheets. Finally, another part of the GN solution was sucked into the GA@GNs to obtain GA@GNs/GNs. It was subjected to freeze-drying and thermal annealing in air at 180 degrees C to remove the citrate modified on the surface of GNs. Because their active sites were well exposed outside, the adsorbed GNs are of high catalytic activity. The study shows that the as-prepared GA@GNs/GNs gives high electrical conductivity (15.4 S m(-1)), specific surface area (291.6 m(2) g(-1)) and apparent heterogeneous electron transfer rate constant (14.8 +/- 0.12 cm s(-1)). The sensor based on the GA@GNs/GNs displays ultrasensitive electrochemical response to glucose, owing to largely enhanced electron transfer, mass transport and catalytic activity. Its peak current linearly increases with the increase of glucose in the range from 0.01 to 16 mM with the detection limit of 0.004 mM (S/N = 3). The analytical method presents the advantage of sensitivity, repeatability and stability compared with present glucose sensors. It has been successfully applied in the detection of glucose in serum samples with the spiked recovery of 95.7-104.2%. The study also provides a promising approach for building on various graphene-metal nanohybrids with excellent electrochemical performance for sensing, catalysis and energy storage/conversion devices. (C) 2014 Elsevier B.V. All rights reserved.

Nanoporous Gold Prepared Via Solid-Phase Reaction: Enhanced Thermal Stability and High Sensitvity for Electrochemical Detection of Glucose

Glucose Biosensor Based on a Platinum Electrode Modified with Rhodium Nanoparticles and with Glucose Oxidase Immobilized on Gold Nanoparticles

Biosensor based on glucose oxidase-nanoporous gold co-catalysis for glucose detection

Communication—Highly Sensitive Glassy Carbon Electrode Altered by Nanoporous Gold for the Electrochemical Detection of Nitrite

Preparation and Bioelectrochemical Application of Gold Nanoparticles-Chitosan-Graphene Nanomaterials

Covalent Immobilisation of a Nanoporous Platinum Film onto a Gold Screen-Printed Electrode for Highly Stable and Selective Non-Enzymatic Glucose Sensing

Self-Supported 3D PtPdCu Nanowires Networks for Superior Glucose Electro-Oxidation Performance

Aerobic Oxidation of D-Glucose on Support-Free Nanoporous Gold

Novel Graphene-Gold Nanohybrid with Excellent Electrocatalytic Performance for the Electrochemical Detection of Glucose

Non‐Enzymatic Electrochemical Detection of Glucose with a Gold Nanowire Array Electrode

Application of hydrophobic palladium nanoparticles for the development of electrochemical glucose biosensor

Direct Application of Gold Nanoparticles to One-Pot Electrochemical Biosensors.

3D Nanoporous Gold with Very Low Parting Limit Derived from Au-based Metallic Glass and Enhanced Methanol Electro-oxidation Catalytic Performance

ELECTROCHEMICAL-BEHAVIOR, APPLICATION AND IMMOBILIZATION OF GLUCOSE-OXIDASE AT NANOMETER-SIZED ULTRAMICROBAND GOLD ELECTRODE

Nanoporous CuZn supported CuO nanoparticle electrodes for non-enzymatic electrochemical glucose detection

Fabrication, Characterization and Application of Gold Nano-Structured Film

Fabrication of gold nanoparticles on bilayer graphene for glucose electrochemical biosensing

Nonenzymatic glucose voltammetric sensor based on gold nanoparticles/carbon nanotubes/ionic liquid nanocomposite.

Nanoporous Metals for Catalytic and Optical Applications

Nanostructured Porous Gold for Methanol Electro-Oxidation

Gold Nanoparticles Integrated in a Nanotube Array for Electrochemical Detection of Glucose