Abstract:The maximum sensitivity function as the conventional robustness index is often used to test the robustness and cannot be used to tune the controller parameters directly. To reduce analytical difficulties in dealing with the maximum sensitivity function and improve the control performance of the proportional-integral-derivative controller, the relative delay margin as a good alternative is proposed to offer a simple robust analysis for the proportional-integral-derivative controller and the first-order plus dead-time systems. The relationship between the parameters of the proportional-integral-derivative controller and the new pair, e.g., the phase margin and the corresponding gain crossover frequency, is derived. Based on this work, the stability regions of the proportional-integral-derivative controller parameters, the proportional gain and the integral gain with a given derivative gain, are obtained in a simple way. The tuning of the proportional-integral-derivative controller with constraints on the relative delay margin is simplified into an optimal disturbance rejection problem and the tuning procedure is summarized. For convenience, the recommended parameters are also offered. Simulation results demonstrate that the proposed methodology has better tracking and disturbance rejection performance than other comparative design methodologies of the proportional-integral/proportional-integral-derivative controller. For example, the integrated absolute errors of the proposed proportional-integral-derivative controller for the tracking performance and disturbance rejection performance are less than 91.3% and 91.7% of the integrated absolute errors of other comparative controllers in Example 3, respectively. The proposed methodology shows great potential in industrial applications. Besides, the proposed method can be applied to the design of the proportional-integral-derivative controller with filtered derivative which is recommended for practical applications to weaken the adverse influence of the high-frequency measurement noise.

Iterative Decentralized Pid Tuning Based On Gain And Phase Margins For Tito Systems

A Recursive Tuning Approach for the Model-Free PID Controller Design

A Developed Method of Tuning PID Controllers with Fuzzy Rules for Integrating Processes.

Robust PID Tuning Using Closed-Loop Identification

Closed-loop Identification Based PID Tuning Without External Excitation

Application of particle swarm optimization algorithm on robust PID controller tuning

A Proposal on Centralised and Distributed Optimisation Via Proportional-Integral-derivative Controllers (PID) Control Perspective

Decentralized Two Degree of Freedom Pid Tuning Method for Mimo Processes

A New Pso-Pid Tuning Method for Time-Delay Processes

An analytical method for PID controller tuning with specified gain and phase margins for integral plus time delay processes

Decentralized PID Controllers for Multivariable Systems

Modified PID controller based on H/sub /spl infin// theory

Tuning of Pid Controller for the Integrating Systems

Two-degrees-of-freedom PID Controller Tuning Method

Tuning of PID Controller for Fractional Order Systems

A new PID controller design with constraints on relative delay margin for first-order plus dead- time systems

PID CONTROL FOR INTEGRATOR AND DEAD TIME PROCESS

Centralized Pi/Pid Controller Design for Multivariable Processes

A PID Controller with Desired Closed-Loop Time Response and Stability Margin

Robust Feedback Compensation and PID Tuning under Actuator Rate Limit Effect Based on Bode’s Integrals

Design of Multivariable PID Control Using Iterative Linear Programming and Decoupling