Abstract:Traditional research on apparent permeability in shale reservoirs has mainly focussed on effects such as poromechanics and porosity-assisted adsorption layers. However, for a more realistic representation of field conditions, a comprehensive multi-scale and multi-flowing mechanism model, considering the fracturing process, has not been thoroughly explored. To address this research gap, this study introduces an innovative workflow for dynamic permeability assessment. Initially, an accurate description of the pore size distribution (PSD) within three major mineral types in shale is developed using focussed ion beam-scanning electron microscopy (FIB-SEM) and nuclear magnetic resonance (NMR) data. Subsequently, an apparent permeability model is established by combining the PSD data, leading to the derivation of dynamic permeability. Finally, the PSD-related dynamic permeability model is refined by incorporating the effects of imbibition resulting from the fracturing process preceding shale gas production. The developed dynamic permeability model varies with pore and fracture pressures in the shale reservoir. The fracturing process induces water blockage, water-film formation, and water-bridging phenomena in shale, requiring additional pressure inputs to counteract capillary effects in hydrophilic minerals in shale, But also increases the overall permeability from increasing permeability at larger scale pores. Unlike traditional reservoirs, the production process commences when the fracture is depleted to 1–2 MPa exceeds the pore pressure, facilitated by the high concentration of hydrophobic organic matter pores in shale, this phenomenon explains the gas production at the intial production stage. The reduction in adsorption-layer thickness resulting from fracturing impacts permeability on a nano-scale by diminishing surface diffusion and the corresponding slip flow of gas. this phenomenon increases viscous-flow permeability from enlarged flow spacing, but the increased viscous flow does not fully offset the reduction caused by adsorbed-gas diffusion and slip flow. In addition to the phenomena arising from various field conditions, PSD in shale emerges as a crucial factor in determining dynamic permeability. Furthermore, considering the same PSD in shale, under identical pore spacing, the shape factor of slit-like clay minerals significantly influences overall permeability characteristics, much more slit-shaped pores(higher shape factor) reduce the overall permeability. The dynamic permeability-assisted embedded discrete fracture model (EDFM) showed higher accuracy in predicting shale gas production compared to the original model.

Assessment of Extended Derjaguin–Landau–Verwey–Overbeek‐based Water Film on Multiphase Transport Behavior in Shale Microfractures

Microscopic seepage simulation of gas and water in shale pores and slits based on VOF

Two-Phase Transport Characteristic of Shale Gas and Water through Hydrophilic and Hydrophobic Nanopores

Gas Diffusion and Flow in Shale Nanopores with Bound Water Films

An improved mathematical model of gas–water two-phase flows in fractured horizontal wells accounting for physical contact behaviors of fractures with total factor characteristics

Spontaneous imbibition model for micro–nano–scale pores in shale gas reservoirs considering gas–water interaction

Simulation of Shale Gas Reservoir Production Considering the Effects of the Adsorbed Water Layer and Flow Differences

Macroscale Gas–Water Two-Phase Transport Simulation in Shales considering Nanomicroscale Effects

Molecular Insights into Multiphase Transport through Realistic Kerogen-Based Nanopores

Water Uptake Behavior and Influence Factors of Longmaxi Shale: Implications from Water Physisorption and Imbibition Measurements

Investigations of Water Transport in Shale Reservoir with Dual-Wettability by Using Monte Carlo Method

Numerical Simulation of Gas-Water Two-Phase Flow in Deep Shale Gas Reservoir Development Based on Mixed Fracture Modeling

Pore-Scale Simulation of Gas and Water Two-Phase Flow in Rough-Walled Fractures Using the Volume of Fluid Method

An Analytical Relative Permeability Model Considering Flow Path Structural Characteristics for Gas-Liquid Two-Phase Flow in Shale Fracture

A 3D Fractal Model Coupled With Transport And Action Mechanisms To Predict The Apparent Permeability Of Shale Matrix

A Dynamic Permeability Model in Shale Matrix after Hydraulic Fracturing: Considering Mineral and Pore Size Distribution, Dynamic Gas Entrapment and Variation in Poromechanics

Molecular Simulation Study and Analytical Model for Oil–Water Two-Phase Fluid Transport in Shale Inorganic Nanopores

Simulation of Shale Gas Transport and Production with Complex Fractures Using Embedded Discrete Fracture Model

Simulating Water Invasion Dynamics in Fractured Gas Reservoirs

Numerical Modeling of Gas and Water Flow in Shale Gas Formations with a Focus on the Fate of Hydraulic Fracturing Fluid

Knudsen diffusion in pore-scale water-bearing shales: modelling and case study