Abstract:Doubly fed induction generators (DFIG) find extensive application in variable-speed wind power plants, providing notable advantages such as cost-effectiveness, operational flexibility across varying speeds, and enhanced power quality. This research focuses on the control of DFIGs employed in variable-speed wind turbine configurations. A suitable mathematical model is chosen for representative systems following a comprehensive review of contemporary research. Subsequent analysis reveals the instability of the open-loop time response of the system. To address this instability, the initial approach involves the implementation of the conventional model predictive controller (MPC). However, the outcomes indicate that this controller falls short of delivering satisfactory performance despite the enhanced stability. In the subsequent phase, efforts are made to mitigate the impact of wind input variability by utilizing the Kalman filter, given its effectiveness in handling high variability. Following this, a novel methodology is introduced, which combines nonlinear MPC with the Lyapunov function. This method is based on the nonlinear model of the system. By using the Lyapunov function in the nonlinear MPC structure, the stability of the designed controller is guaranteed. To validate the proposed control approach, the results are compared with PID based controller in MATLAB/Simulink. The simulation results showed that the output variables of the modeled DFIG system achieve stability within a reasonable timeframe applying the input.

A Novel Inertial Control Method Suitable for Doubly Fed Induction Generator Considering Stability Constraints

Decentralized Nonlinear Control of Wind Turbine with Doubly Fed Induction Generator

Modeling and Control of Wind Turbine with Doubly Fed Induction Generator

Autonomous Operation Control Technique of DFIG Under Unbalanced Load

Nonlinear Model Predictive Control for Doubly Fed Induction Generator with Uncertainties

Stator Voltage Oriented Variable-parameter Control Strategy for Wind Turbine Driven Doubly Fed Induction Generator

A Control Strategy for Doubly-fed Induction Generator Wind Turbines under Asymmetrical Grid Voltage Conditions Caused by Faults

A Novel Doubly Fed Induction Generator System with Fault Ride Through Capability

Direct Power Control of Doubly Fed Induction Generator Without Phase-Locked Loop in Synchronous Reference Frame During Frequency Variations

Voltage Imbalance Compensation for Doubly Fed Induction Generator Using Direct Resonant Feedback Regulator

Improved Vector Control of Brushless Doubly Fed Induction Generator under Unbalanced Grid Conditions for Offshore Wind Power Generation

Multiple Target Implementation for A Doubly Fed Induction Generator Based on Direct Power Control under Unbalanced and Distorted Grid Voltage

Linear Robust Control Methods For A Doubly Fed Induction Generator At Steady States

A Modeling Method for the Control Circuit of a Double-Fed Induction Generator in a Wind Power System Based on Multimodel Fusion

Simulation of a Site-Specific Doubly-Fed Induction Generator (DFIG) for Wind Turbine Applications

Sharing of Unbalanced Loads in an Isolated Distributed Generation System with Droop Controlled Doubly Fed Induction Generator

Enhanced Inertial Response Capability of a Variable Wind Energy Conversion System

Doubly-fed Induction Generator Rotor Current Decoupling Control Considering Its Stator Transients

Torque Limit-Based Inertial Control of a DFIG for Rapid Frequency Stabilization

Optimized Control of the Doubly Fed Induction Generator System Based on Input-Output Linearizing Scheme

Simplified Method of Doubly Fed Induction Generator