Abstract:As jointed rocks consist of joints embedded within intact rock blocks, their behavior depends on the behaviors of the joints and the intact rock blocks. In a jointed rock, there are two levels of heterogeneity within the jointed rocks due to the differences in properties between the rock blocks and the joints at a macro-scale, and within the intact rock blocks due to difference in the randomly-distributed flaws at a meso-scale. In this paper, numerical tests on plane stress numerical specimens with an embedded, partially-spanning joint are reported. The individual influence of three parameters relating to the geometry of partially-spanning joints: joint location, joint orientation and trace length was studied. In the simulations, the joints were modeled by elements with low moduli and strengths, whereas the heterogeneity of the rock properties of the intact rock block was taken into account by assuming that they obey the Weibull distribution. The numerical simulations not only agreed well with the experimental results, but also duplicated the complete rupture process of samples with the stress evolution and tempo-spatial distribution of damage events. The numerical results show that there is an approximately linear relationship between the location of the terminus of the partially-spanning joint with respect to the end of the sample (joint location) and the compressive strength of the partially-cut sample, whereby failure stress increases with increasing joint location value. With respect to joint orientation, the simulations show that the minimum compressive strength occurs for a joint angle of 45°, and that compressive strength increases with both increasing joint angle and decreasing joint angle from this critical value of 45°. In relation to the joint trace length, the numerical results reveal that the compressive strength of partially-cut specimens is correlated with the joint trace length using an approximately linear relationship.

Analysis Of The Effect Of Joints On Rockmass Strength

On Size Effect of Rock Joints Roughness Based on Varied Statistical Methods

Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints

Study of Size Effect on the Anisotropic Variation Coefficient of Rock Joints

Numerical Analysis on the Joint Weakening Effect of Rock Mass Behaviors in Tension

Study on the Effect of Rock Strength on the Macro-Meso Shear Behaviors of Artificial Rock Joints

Investigating the Influence of Joint Angles on Rock Mechanical Behavior of Rock Mass Using Two-Dimensional and Three-Dimensional Numerical Models

Statistical analysis on the mechanical behaviour of non-persistent jointed rock masses using combined DEM and DFN

Experimental and Numerical Study on the Shear Behaviour of Standard JRC Double-Joint Rock Masses

An experimental study of mechanical behavior of brittle rock-like specimens with multi-non-persistent joints under uniaxial compression and damage analysis

Effect of Joint Roughness and Infill Thickness on Shear Characteristics of Rock Mass

Shear damage mechanisms of jointed rock mass: a macroscopic and mesoscopic study

Influence of the Geometry of Partially-Spanning Joints on Mechanical Properties of Rock in Uniaxial Compression

Experimental and Numerical Studies on Mechanical Characteristics and Fracture Behaviours of Jointed Rock with Different Roughness

Effect of Parallel Joint Interaction on Mechanical Behavior of Jointed Rock Mass Models

Scale Effect of Shear Mechanical Properties of Non-Penetrating Horizontal Rock-Like Joints

Investigation on the scale dependence of shear mechanical behavior of rock joints using DEM simulation

Natural joint effect on mechanical characteristics and fracture evolution of In-Site rocks under uniaxial compression

Fracture Analysis Of Jointed Rock Mass Based On Nonlinear Fem And Physical Experiment

Numerical Simulation on the Effect of Rock Joint Roughness on the Stress Field

Mechanical behavior and failure modes of jointed rock mass based on rough discrete fracture network models