Abstract:Based on the linear Fresnel concentration technology, a hybrid solar thermal power and cooling cogeneration system has been developed aiming for the solar thermal utilization in hot climate regions. The thermal from the solar Fresnel collectors can be used for air condition with high efficiency solar absorption cooling, and can also be used for power generation with Organic Rankine's cycle (ORC) cycle. It mainly consists of linear Fresnel solar collector, molten salt thermal storage tank, steam drum, ORC power generation equipment and absorption chiller. And this paper introduces the running modes under different kinds of solar radiation conditions. The system will turn on the heat storage mode when the incident solar rays are strong, and will switch to the heat release mode under poor insolation. Actually, we can choose to run the hybrid system in the mode of cooling or electricity generation in response to our needs. The Fresnel solar collector acts a crucial role in different running mode. Therefore, simulations on the mirror field and the absorber of the collector are operated respectively. On the basis of the results, we make the optimal operation strategies for the hybrid system. According to the analysis above, we can draw the conclusions. The hybrid solar thermal power and cooling cogeneration system is designed with several running modes, which guarantees the system runs stably and reliably.

Introduction and Analysis of a Hybrid Solar Thermal Power and Cooling Cogeneration System with Linear Fresnel Solar Collector