Comparative Study on Two Photovoltaic and Thermal Solar Moduleds with Point-Focus Fresnel Concentrator

Ning Xu,Jie Ji,Wei Sun,Wenzhu Huang
DOI: https://doi.org/10.18086/swc.2015.05.21
2015-01-01
Abstract:In this paper, the electrical and thermal performances of both Fresnel concentrator photovoltaic/thermal (FCPV/T) modules with thermal collector and FCPV modules with passive cooling heat-sinks are investigated in experimental method. Both types of modules are equipped with triple-junction solar cells. Their geometric concentrating ratio is as high as 1090x. Comparative analysis has been conducted based on experimental data. The experimental results have been analyzed from the viewpoint of thermodynamics. From the first law point of view, it is found that the overall efficiency of the FCPV/T modules can exceed 80% but it drops significantly as the coolant water is heated up. Meanwhile, the electrical efficiency of the two types of modules can reach up to 28.9%. While from the second law point of view, a highest exergetic efficiency of 33.9% and 28.9% can be produced by the FCPV/T modules and the FCPV modules, respectively. Water temperature is found to play an insignificant role on the exergetic efficiency and irradiation influences dominantly. Besides, the electrical outputs of the two types of modules are almost equal at the same time even if notable operating temperature difference between their cells exists. Thermal profile of the CPV/T receiver has been simulated on the basis of a 3D heat transfer model developed in the thermal analysis software Comsol. The influence of beam irradiance and cell temperature on electrical efficiency is further studied. The results indicate that electrical performance of these modules is affected mainly by beam irradiance, and it is influenced little by cell operating temperature, which greatly differs from flat-plate PV/T modules.
What problem does this paper attempt to address?