Abstract:Bio-oils contain a substantial number of highly oxygenated hydrocarbons, which often exhibit low thermal stability during storage, handling, and refining. The primary objectives of this study are to characterize the hydroxyl group in bio-oil fractions and to investigate the relationship between the type of hydroxyl group and accelerated aging behavior. A bio-oil was fractionated into five solubility-based fractions, classified in two main groups: water-soluble and water-insoluble fractions. These fractions were then subjected to chemoselective reactions to tag molecules containing hydroxyl groups and analyzed by negative-ion electrospray ionization 21 T Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). The fractions were also subjected to accelerated aging experiments and characterized by FT-ICR MS and bulk viscosity measurements. Extracting insightful information from ultrahigh-resolution data to aid in predicting upgrading methodologies and instability behaviors of bio-oils is challenging due to the complexity of the data. To address this, an unsupervised learning technique, k-means clustering analysis, was used to semiquantify molecular compositions with a close Euclidean distance within the (O/C, H/C) chemical space. The combination of k-means analysis with findings from chemoselective reactions allowed the distinctive hydroxyl functionalities across the samples to be inferred. Our results indicate that the hexane-soluble fraction contained numerous molecules containing primary and secondary alcohols, while the water-soluble fraction displayed diverse groups of oxygenated compounds, clustered near to carbohydrate-like and pyrolytic humin-like materials. Despite its high oxygen content, the water-soluble fraction showed minimal changes in viscosity during aging. In contrast, a significant increase in viscosity was observed in the water-insoluble materials, specifically, the low- and high-molecular-weight lignin fractions (LMWL and HMWL, respectively). Among these two fractions, the HMWL exhibited the highest increase in viscosity after only 4 h of accelerated aging. Our results indicate that this aging behavior is attributed to an increased number of molecular compositions containing phenolic groups. Thus, the chemical compositions within the HMWL are the major contributors to the viscosity changes in the bio-oil under accelerated aging conditions. This highlights the crucial role of oxygen functionality in bio-oil aging, suggesting that a high oxygen content alone does not necessarily correlate with an increase of viscosity. Unlike other bio-oil categorization methods based on constrained molecule locations within the van Krevelen compositional space, k-means clustering can identify patterns within ultrahigh-resolution data inherent to the unique chemical fingerprint of each sample.

Composition Analysis of Bio-Oil Obtained by Fast Pyrolysis Using Comprehensive Two Dimensional Gas Chromatography with Time-Of-Flight Mass Spectrometric Detector

Characterization of crude and ethanol-stabilized bio-oils before and after accelerated aging treatment by comprehensive two-dimensional gas-chromatography with time-of-flight mass spectrometry

Estimation and Comparison of Bio-Oil Components from Different Pyrolysis Conditions

Comparative Study by GC×GC-TOFMS on the Composition of Crude and Composite-Additives Bio-Oil Before and after Accelerated Aging Treatment

Chemical characterization of bio-oils using comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry

Exploring Aging Kinetic Mechanisms of Bio-Oil from Biomass Pyrolysis Based on Change in Carbonyl Content

Character and Composition Analysis of Distilling Fractions from Sewage Sludge Pyrolysis Oil

GC–MS and FT-IR Analysis of the Bio-Oil with Addition of Ethyl Acetate During Storage

TG-FTIR ANALYSIS OF BIO OIL PYROLYSIS/GASIFICATION

Assessment of Accelerated Aging Effect of Bio-Oil Fractions Utilizing Ultrahigh-Resolution Mass Spectrometry and k-Means Clustering of van Krevelen Compositional Space

Influence of Industrial Alcohol and Additive Combination on the Physicochemical Characteristics of Bio-Oil from Fast Pyrolysis of Pine Sawdust in a Fluidized Bed Reactor with Hot Vapor Filter

Analysis of Property Variation and Stability on the Aging of Bio-Oil from Fractional Condensation

TG-FTIR Analysis of Bio-Oil and Its Pyrolysis/gasification Property

FTIR and Mass Spectral Analyses of an Upgraded Bio-oil

Bio-Oil Production from Multi-Waste Biomass Co-Pyrolysis Using Analytical Py–GC/MS

Pyrolysis Characteristics of Bio-Oil Fractions Separated by Molecular Distillation

Characterization and Comparison of Fast Pyrolysis Bio-oils from Pinewood, Rapeseed Cake, and Wheat Straw Using 13C NMR and Comprehensive GC × GC

Long Term Storage Stability of Bio-Oil from Rice Husk Fast Pyrolysis

Properties of Bio-oil from Fast Pyrolysis of Rice Husk

Fractional Composition Analysis for Upgrading of Fast Pyrolysis Bio-Oil Produced from Sawdust

Study on the thermal stability of the bio-oil components by Py-GC/MS