Abstract:CsPbI2Br thin films prepared in ambient air are susceptible to humidity, resulting in low coverage, poor crystallization quality, numerous pinholes, and easy transformation into non perovskite phases. To overcome the troubles of pervoksite fabrication in ambient air, a feasible way is to reduce the moisture around the films as much as possible according to dynamic hot-air assisted strategy. However, the hot air accelerates the evaporation rate of solvent, resulting in the decrease of grain size. In order to improve the crystal growth and long-term stability in dynamic hot-air assisted strategy, in this work, we present a dynamic hot-air assisted recrystallization (DHR) strategy to prepare high-quality CsPbI2Br thin films in ambient air (i.e. the CsPbI2Br thin films prepared via dynamic hot-air strategy are recrystallized by using a green solvent (methylamine acetate) with high viscosity coefficient). Under ambient air with high humidity (RH＞60%), the CsPbI2Br thin film with high coverage, (100) preferred orientation, large average grain size, and stable structure is prepared via DHR strategy. The dynamic hot-air process can effectively reduce the moisture around the film and increase the nucleation sites in the precursor solution, thereby improving the coverage of the film. However, this process inevitably results in the significant decrease of grain size (Rave= 0.32 μm) (i.e. more grain boundaries), exacerbating non-radiative recombination of carriers associated with trap states at these boundaries. The high coverage increases the grain-to-grain contact area, facilitating complete recrystallization. Thus, the recrystallization process can significantly increase the grain size (Rave = 2.63 μm) and obtain a (100) preferred orientation (I(110)/I(200) = 0.006), resulting in high photoluminescence intensity and long fluorescence lifetime (118 ns). The unencapsulated CsPbI2Br perovskite solar cell (PSC) optimized via DHR strategy with low hysterescence factor (2.34%) and high repeatability exhibits a high power conversion efficiency (PCE = 17.55%), which is higher than those of most CsPbI2Br PSCs prepared in ambient air and gloveboxes previously reported. Moreover, the unencapsulated CsPbI2Br PSC possesses an excellent storage stability under ambient air with high humidity (RH > 60%), remaining 96% of the original PCE after aging 40 days. This provides a promising approach for achieving high-performance and long-term stable CsPbI2Br films under ambient air with high humidity, which is expected to promote the commercialization process of perovskite/silicon tandem cells and semi-transparent devices.

Manipulating Perovskite Precursor Solidification Toward 21% Pristine MAPbI3 Solar Cells

Study on the Ambient Temperature As an Important but Easily Neglected Factor in the Process of Preparing Photovoltaic All-Inorganic CsPbIBr2 Perovskite Film by the Elegant Solvent-Controlled Growth Strategy

Tailoring Precursor Chemistry Enabled Room Temperature‐Processed Perovskite Films in Ambient Air for Efficient and Stable Solar Cells with Improved Reproducibility

Effect of reaction temperature on film quality and cell performance: Comparative study of single and mixed cation/halide perovskites

Unlocking the Ambient Temperature Effect on FA‐based Perovskites Crystallization by In‐situ Optical Method

Mechanism of Solvent Engineering for Controlling the Room-Temperature Crystallization Kinetics of MAPbI 3 Perovskite Polycrystals

Ambient Air Condition for Room-Temperature Deposition of MAPbI Films in Highly Efficient Solar Cells.

Evolved Photovoltaic Performance of MAPbI3 and FAPbI3-based Perovskite Solar Cells in Low-Temperatures

Room Temperature Formation Of Semiconductor Grade Alpha-Fapbi(3) Films For Efficient Perovskite Solar Cells

Evolved Photovoltaic Performance of MAPbI3 3 and FAPbI3-based 3-Based Perovskite Solar Cells in Low- Temperatures

Achieving Efficient and Stable Perovskite Solar Cells in Ambient Air Through Non‐Halide Engineering

Ambient Air Temperature Assisted Crystallization for Inorganic CsPbI2Br Perovskite Solar Cells

Improving Crystallization and Stability of Perovskite Solar Cells Using a Low-Temperature Treated A-Site Cation Solution in the Sequential Deposition

Improving Crystallization and Photoelectric Performance of CsPbI2Br Perovskite under Ambient Air Via Dynamic Hot-Air Assisted Recrystallization Strategy

Thermal Radiation Driven Ultrafast Crystallization of Perovskite Films Under Heavy Humidity for Efficient Inverted Solar Cells

Water vapour pressure as determining control parameter to fabricate high efficiency perovskite solar cells at ambient conditions

Low‐Temperature Crystallization of CsPbIBr 2 Perovskite for High Performance Solar Cells

Achieving 20% Efficiency For Low-Temperature-Processed Inverted Perovskite Solar Cells

Vacuum-Assisted Thermal Annealing of CH3NH3PbI3 for Highly Stable and Efficient Perovskite Solar Cells

Impacts of MAPbBr3 Additive on Crystallization Kinetics of FAPbI3 Perovskite for High Performance Solar Cells

Manipulating Nucleation and Crystal Growth of Inorganic Perovskite Solar Cells