Abstract:Optical atomic clocks have demonstrated revolutionary advances in precision timekeeping, but their applicability to the real world is critically dependent on whether such clocks can operate outside a laboratory setting. The challenge to clock portability stems from the many obstacles not only in miniaturizing the underlying components of the clock $-$ namely the ultrastable laser, the frequency comb, and the atomic reference itself $-$ but also in making the clock resilient to environmental fluctuations. Photonic integration offers one compelling solution to simultaneously address the problems of miniaturization and ruggedization, but brings with it a new set of challenges in recreating the functionality of an optical clock using chip-scale building blocks. The clock laser used for atom interrogation is one particular point of uncertainty, as the performance of the meticulously-engineered bulk-cavity stabilized lasers would be exceptionally difficult to transfer to chip. Here we demonstrate that a chip-integrated ultrahigh quality factor (Q) spiral cavity, when interfaced with a 1348 nm seed laser, reaches a fractional frequency instability of $7.5 \times 10^{-14}$, meeting the stability requirements for interrogating the narrow-linewidth transition of $^{88}$Sr$^+$ upon frequency doubling to 674 nm. In addition to achieving the record for laser stability on chip, we use this laser to showcase the operation of a Sr-ion clock with short-term instability averaging down as $3.9 \times 10^{-14} / \sqrt{\tau}$, where $\tau$ is the averaging time. Our demonstration of an optical atomic clock interrogated by an integrated spiral cavity laser opens the door for future advanced clock systems to be entirely constructed using lightweight, portable, and mass-manufacturable integrated optics and electronics.

Population Inversion On Sr-88 Atomic Beam For Active Optical Clock

Realization of population inversion between 7S 1/2 and 6P 3/2 levels of cesium for four-level active optical clock

Adiabatic Passage Based on the Calcium Active Optical Clock

The Lasing Realization of Rb Four-Level Active Optical Clock

Active Optical Clock Based on Laser Cooling of Alkali-metal Atoms

A Strontium Lattice Clock with Both Stability and Uncertainty below 5X10-18

Active Optical Clock Based on Four-Level Quantum System

High-Stability Rb Optical Clock Based on Pulse-Modulated Broad-Spectrum Comb-Tooth Laser

Optimization of Pumping Light for Cs Four-level Active Optical Clock

Cesium Active Optical Clock In Four-Level Laser Configuration

Active Optical Clock Signal Based on 87rb Atoms Cooled by 780 NM Diffuse Laser

Optical Atomic Clock Interrogation Via an Integrated Spiral Cavity Laser

A strontium lattice clock with both stability and uncertainty below 5×10 -18

Optically Pumped Alkali Laser in Pure Rb-87 Atom Cell Without Buffer Gas

Dual-wavelength active optical clock

Active Optical Clock

Lasing of Cesium Active Optical Clock with 459 Nm Laser Pumping

System Development and Clock Transition Spectroscopy Detection of Transportable 87sr Optical Clock

Prospects for an Active Optical Clock Based on Cavityless Lasing

Dispersion detection of optical clock transition in thermal atomic beam

Optical-lattice-based Cs Active Clock with a Continual Superradiant Lasing Signal