Abstract:The low-pressure atmosphere rich in CO2 (~95%) on Mars makes the in-situ resource utilization of Martian CO2 and the improvement of oxidation attract widespread attention. It contributes to constructing the Mars base which will support the deep space exploration. Conversion of CO2 based on high voltage discharge has the advantages of environmental friendliness, high efficiency and long service life. It has application potential in the in-situ conversion and utilization of Martian CO2 resources. We simulate the CO2 atmosphere of Mars where the pressure is fixed at 1 kPa and the temperature is maintained at room temperature. A comparative study is carried out on the discharge characteristics of two typical electrode structures (with/without barrier dielectric) driven by 20 kHz AC voltage. Combined with numerical simulations, the CO2 discharge characteristics, products and their conversion pathways are analyzed. The results show that the discharge mode changes from single discharge during each half cycle into multi discharge pulses after adding the barrier dielectric. Each discharge pulse of the multi pulses corresponds to a random discharge channel, which is induced by the distorted electric field of accumulated charge on the dielectric surface and the space charge. The accumulated charge on the dielectric surface promotes the primary discharge and inhibits the secondary discharge. Space charge will be conducive to the occurrence of secondary discharge. The main products in discharge process include \begin{document}${\rm{CO}}^+_2 $\end{document}, CO, O2, C, and O. Among the products, CO is produced mainly by the attachment decomposition reaction between energetic electrons and CO2 at the boundary of cathode falling zone, and the contribution rate of the reaction can reach about 95%. The O2 is generated mainly by the compound decomposition reaction between electrons and \begin{document}${\rm{CO}}^+_2 $\end{document} near the instantaneous anode surface or instantaneous anode side dielectric surface, and the contribution rate of the reaction can reach about 98%. It is further found that the dielectric does not change the generation position nor dominant reaction pathway of the two main products, but will reduce the electron density from 5.6×1016 m−3 to 0.9×1016 m−3 and electron temperature from 17.2 eV to 11.7 eV at the boundary of the cathode falling region, resulting in the reduction of CO production. At the same time, the deposited power is reduced, resulting in insufficient \begin{document}$ {\rm{CO}}^+_2 $\end{document} yield near the instantaneous anode surface and instantaneous anode side dielectric surface and further the decrease of O2 generation.

Optical emission spectroscopy diagnostics of CO<sub>2</sub> conversion with micro-plasma

Study on the Conversion Mechanism of CO2 to O2 in Pulse Voltage Dielectric Barrier Discharge at Martian Pressure

Investigation of Pulse Parameters on CO<inf>2</inf> Splitting to O<inf>2</inf> by Dielectric Barrier Discharge Plasma at 1kPa

Investigation of Pulse Parameters on CO2 Splitting to O2 by Dielectric Barrier Discharge Plasma at 1kPa

Dissociation of CO2 by Thermal Plasma with Contracting Nozzle Quenching

Comparative Study on Discharge Characteristics of Low Pressure CO2 Driven by Sinusoidal AC Voltage: DBD and Bare Electrode Structure

Advancing CO2 to CO conversion: Detailed impact analysis of atmospheric molecules in an ultrashort pulse laser filament plasma reactor

Generation and migration of CO in CO2 DBD glow plasma under Martian pressure

Warm Plasma Activation of CO2 in a Rotating Gliding Arc Discharge Reactor

Investigation of Highly Efficient CO2 Hydrogenation at Ambient Conditions Using Dielectric Barrier Discharge Plasma

CO2 conversion in non-thermal plasma and plasma/g-C3N4 catalyst hybrid processes

Dielectric Barrier Discharge Plasma Assisted CO2 Conversion: Understanding the Effects of Reactor Design and Operating Parameters

Carbon Dioxide Reforming of Methane in Kilohertz Spark‐discharge Plasma at Atmospheric Pressure

Enhancing CO2 Conversion Via Atmospheric Pressure Glow Discharge Plasma Jet Coupled with Catalysts

Carbon Dioxide Reforming of Methane to Syngas by Thermal Plasma

Investigation on the Products Distribution, Reaction Pathway, and Discharge Mechanism of Low‐pressure CO2 Discharge by Employing a 1D Simulation Model

Status of CO2 Conversion Using Microwave Plasma

Carbon Dioxide Reforming Of Methane In Stable Spark-Discharge Plasma

Conversion of Carbon Dioxide to Carbon Monoxide by Pulse Dielectric Barrier Discharge Plasma

Effect of Argon on CO2 Decomposition in Micro-Slit Sustained Glow Discharge Reactor

Temperature‐Dependent Kinetics of Plasma‐Based CO2 Conversion: Interplay of Electron‐Driven and Thermal‐Driven Chemistry