Abstract:Combined cooling, heating and power (CCHP) systems offer the potential for a significant increase in fuel use efficiency by generating electricity onsite and recycling the exhaust gas for heating, cooling, or dehumidifying. A challenge for CCHP system is the efficient integration of distributed generation (DG) equipment with thermally-activated (TA) technologies. The China Ministry of Science and Technology and Tsinghua University launched the 863 Hi-Tech Program in 2007 to focus on laboratory and demonstration research to study the critical issues of CCHP systems, advance the technology and accelerate its application. The research performed at the Building Energy Research Center (BERC) Laboratory focuses on assessing the operational performance and energy efficiency of the integration of current DG and TA technologies; developing and verifying mathematical models of the individual devices and all the systems.The test laboratory is a flexible test-bed for the configuration of DG (presently a 70-kW natural gas-fired internal combustion engine (ICE) with various heat recovery units, such as an flue gas-to-water heat recovery unit (FWRU), a jacket water heat recovery unit (JRU), liquid desiccant dehumidification systems (LDS), an exhaust-gas-driven double-effect absorption heat pump (EDAHP), and a condensation heat recovery unit (CRU)). In the winter, the exhaust gas from the ICE is used in the FWRU or used to drive the EDAHP directly, and the exhaust gas from the EDAHP is used in the CRU. The water flows from the CRU can be directed to the evaporator side of the EDAHP as the low-grade heat source. The water flows from the condensation side of the EDAHP, in conjunction with the jacket water flows from the JRU, is used for heating. In the summer, the exhaust gas from the ICE is used to drive the EDAHP for cooling directly, the exhaust gas from the EDAHP is bypassed to the exit via automated damper controls. The waste heat of the jacket water is used to drive the liquid desiccant dehumidification systems, to realize the separate control of heat and humidity. The automated damper is used in order to test various configurations and operating modes.The testing results show that the operating parameters and efficiencies of the overall system depend on different configurations. Under certain combinations of CCHP, the efficiency of the overall system can be as high as 90% (based on lower heating value of the natural gas). (c) 2008 Elsevier Ltd. All rights reserved.

Thermodynamic Analyses Of A Micro Combined Cooling, Heating And Power System

Performance Analysis and Evaluation of a Supercritical CO2 Rankine Cycle Coupled with an Absorption Refrigeration Cycle

Comparative Study on Heating and Cooling Systems Integrated with Energy Storage

Performance Analysis of the Combined Cooling Heating and Power System (CCHP) based on Internal Combustion Engine,Gas Turbine and Micro Gas Turbine

Thermodynamic analyses and optimization of a novel CCHP system integrated organic Rankine cycle and solar thermal utilization

Proposal and comprehensive thermodynamic performance analysis of a new geothermal combined cooling, heating and power system

Energy, exergy, energy-saving, economic and environmental analysis of a micro-gas turbine-PV/T combined cooling, heating and power (CCHP) system under different operation strategies: Transient simulation

Application Study Of A Cchp System Operating With The Flue Gas And Geothermal Energy

The Engineering Practice of A Cchp System with the Condensation Heat Recovery of the Flue Gas in China

Thermodynamic Analysis of Operating Strategies for Waste Heat Recovery of Combined Heating and Power Systems

Laboratory Research on Combined Cooling, Heating and Power (CCHP) Systems

Thermodynamic analysis of a novel combined cooling, heating, and power system consisting of wind energy and transcritical compressed CO2 energy storage

The Performance Improvement Of A 70kwe Natural Gas Chp System

Thermodynamic Analysis Of A Central Heating System Combining The Urban Heat Network With Geothermal Energy

Dynamic analysis and operation simulation for a combined cooling heating and power system driven by geothermal energy

Thermodynamic Analysis of a Cogeneration System Combined with Heat, Cold, and Electricity Based on the Supercritical CO2 Power Cycle

Thermo-economic analysis of a combined cooling, heating and power system based on carbon dioxide power cycle and absorption chiller for waste heat recovery of gas turbine

Exergy analysis of natural gas ice-based CHP system

Thermodynamic, Energy Consumption and Economic Analyses of the Novel Cogeneration Heating System Based on Condensed Waste Heat Recovery

Modeling and 4E analysis of a new combined cooling, heating, and power energy system based on biogas combustion and hot oil for heat supply

Thermodynamics, flexibility and techno-economics assessment of a novel integration of coal-fired combined heating and power generation unit and compressed air energy storage