Abstract:Tensegrity structures have been widely utilized as lightweight structures due to their high stiffness-to-mass and strength-to-mass ratios. Minimal mass design of tensegrity structures subject to external loads and specific constraints (e.g., member yielding and buckling) has been intensively studied. However, all the existing studies focus on passive tensegrity structures, i.e., the structural members cannot change their lengths actively and the structure has to passively resist external loads. An active tensegrity structure equipped with actuators can actively adapt its internal forces and nodal positions and thus can actively resist external loads. Therefore, it is expected that active tensegrity structures use less material compared to passive tensegrity structures thus leading to a smaller mass. Due to the integration of the active control system, the design of active tensegrity structures is different from passive tensegrity structures. This study proposes a general approach for the design of minimal mass active tensegrity structures based on a mixed integer programming scheme, in which the member crosssectional areas, prestress, actuator layout and control strategies (i.e., actuator length changes) are designed simultaneously. The member cross-sectional areas, prestress level, and actuator control strategies are treated as continuous variables and the actuator layout is treated as a binary variable. The equilibrium condition, member yielding, cable slackness, strut buckling, and the limitations on the nodal displacements as well as other practical requirements are formulated as constraints. Three typical active tensegrity structures are designed through the proposed approach and the results are benchmarked with the equivalent minimal mass passive designs. It is illustrated that the active designs can significantly decrease the material consumption compared with the equivalent passive designs thus leading to more lightweight tensegrity structures.

Design And Optimization Of Light-Weight Smart Structures: Application To Truss-Core Actuator

Optimal Analysis and Application in the Design of Ultra-Light Truss-Core Structures

A Protocol for Characterizing the Performance of Light-Weight Truss-Core Actuators

Strength optimization analysis of tensegrity structure by shape adjustments under restricted displacements

Lightweight design of aircraft truss based on topology and size optimization

Minimal Mass Design of Active Tensegrity Structures

Electromechanical Analysis and Simplified Modeling of Dielectric Elastomer Multilayer Bending Actuator

Data-driven Design of Well-Behaved Nonlinear Structures: A Case Study on the Von Mises Truss

Structural design and experimental study on the axial compression behavior of large-span carbon-fiber-reinforced polymer truss structures

PneuMesh: Pneumatic-driven Truss-based Shape Changing System

Conceptual Configuration Analysis of Tetrahedral-Octahedral Heterogeneous Unit and Topological Design of Shape Morphing Mechanism

Topology Optimization of Skeleton-Reinforced Soft Pneumatic Actuators for Desired Motions

Structural Design and Compression-Bending Test of Ultra-Lightweight Carbon-Fiber-reinforced Polymer Truss Structures

Strength Optimization of Ultralight Corrugated-Channel-core Sandwich Panels

Experimental and Numerical Analysis of a Novel Assembled Auxetic Structure with Two-Stage Programmable Mechanical Properties

Design and Development of a Piezoelectric Linear Actuator for Smart Structures

Additively manufactured truss-core sandwich cylinders: Materials, processes and performances

Elastic Shape Morphing of Ultralight Structures by Programmable Assembly

Light-Weight Design Method for Force-Performance-Structure of Complex Structural Part Based Co-operative Optimization

Sub-Structuring Modeling of Large Space Truss Structures for Structure/Control Optimization in Presence of Parametric Uncertainties

Topology optimization of active tensegrity structures