Abstract:To meet the requirements for the flexible end-effectors of industrial grippers and climbing robots, inspired by the animal attachment mechanism, a bio-inspired adhesive unit (Bio-AU) was designed. Due to its fluid-driven operating characteristics and multi-level adhesive structure, its fabrication and molding is challenging, including the assembly and molding of complex cavities with good pressure-bearing capability, mechanical properties of multi-level materials with variable stiffness, etc. In this study, based on the lamination mold casting process, the “simultaneous molding and assembly” method was established, which can be applied to form and assemble complex cavity parts simultaneously. Moreover, the dovetail tenon-and-mortise parting structures were analyzed and designed. Furthermore, the adhesion between the parting surfaces can be improved using plasma surface treatment technology. By applying the above methods, the assembly accuracy and pressure-bearing capability of the complex flexible cavities are improved, which reduces the individual differences between finished products. Additionally, the maximum pressure-bearing value of the sample was 83 kPa, which is 1.75 times that before optimization. the adhesive structure with different stiffness components was fabricated at low cost using silicon rubber substrates with different properties, which met the requirements of multi-level material with variable stiffness of the Bio-AU. The bending angle of the optimized molding product was about 50.9° at 80 kPa, which is significantly larger than the 24.6° of the lighting-cured product. This indicates that the optimized lamination mold casting process has a strong inclusion of materials, which improves the deformation capacity and self-adaptability of Bio-AUs and overcomes the defects of 3D printing technology in the formation of large, flexible, and controllable-stiffness structures. In this study, the effective fabrication of flexible multilayer adhesive structures was accomplished, and technical support for the development of Bio-AUs was provided, which met the requirements of bionic climbing robots and industrial adhesive grippers for end-effectors.

Fabrication of a Biomimetic Controllable Adhesive Surface by Ultraprecision Multistep and Layered Scribing and Casting Molding

Gecko-Inspired Biomimetic Surfaces with Annular Wedge Structures Fabricated by Ultraprecision Machining and Replica Molding

Controllable Anisotropic Dry Adhesion in Vacuum: Gecko Inspired Wedged Surface Fabricated with Ultraprecision Diamond Cutting

Fabrication of Biomimetic Wet Adhesive Pads with Surface Microstructures by Combining Electroforming with Soft Lithography

Rapidly tunable and highly reversible bio-inspired dry adhesion for transfer printing in air and a vacuum.

Switchable Adhesion of Gecko-Inspired Hierarchically Wedge-Mushroom-Shaped Surface

Robust Scalable Reversible Strong Adhesion by Gecko-Inspired Composite Design

Bioinspired Adhesive Manufactured by Projection Microstereolithography 3D Printing Technology and Its Application

Design, fabrication and characterization of gecko inspired micro-fibrillar adhesive materials for wall climbing robots

Fabrication of Flexible Multi-Cavity Bio-Inspired Adhesive Unit Using Laminated Mold Pouring

Design and fabrication of a gecko-inspired surface for improving the grasping ability of a humanoid dexterous hand

Controllable Interfacial Adhesion Applied to Transfer Light and Fragile Objects by Using Gecko Inspired Mushroom-Shaped Pillar Surface.

Bioinspired Dry Adhesives for Highly Adaptable and Stable Manipulating Irregular Objects under Vibration

Flexible Control and Coupling of Adhesion and Friction of Gecko Setal Array During Sliding

Ladybug Inspired Double‐Layered Adhesive with Enhanced Robustness of Surface Roughness

Tough Reversible Adhesion Properties of a Dry Self-cleaning Biomimetic Surface.

Effects of loading and unloading control parameters on adhesive performance for biomimetic controllable adhesive with wedge-shaped microstructures

Design and fabrication of gecko-inspired adhesives

A gecko-inspired double-sided adhesive.

Rectangle-capped and Tilted Micropillar Array for Enhanced Anisotropic Anti-Shearing in Biomimetic Adhesion.

Electrochemical polishing assisted selective laser melting of biomimetic superhydrophobic metallic parts