Abstract:To further enhance the crashworthiness of subway vehicle anti-climb energy-absorbing devices, this paper proposes a novel collapsible structure, which is embedded with honeycomb aluminum blocks and consists of an inner and outer double-layer square tube. An impact finite element model of the subway vehicle’s anti-climb energy-absorbing device was established using LS-DYNA (v.17.2). The effects of the connecting diaphragm thickness, the inner and outer tube thicknesses of the thin-walled tubes, and the yield strength of the honeycomb aluminum on the energy absorption and impact force of the anti-climb energy-absorbing device were investigated. The results indicate that changes in the inner and outer tube thicknesses of the thin-walled tubes significantly affect the energy absorption and impact force of the anti-climb energy-absorbing device. However, changes in the connecting diaphragm thickness only increase the maximum energy absorption by up to 7.5% but have a significant impact on the maximum peak force. It was also found that the difference in energy absorption due to changes in the yield strength of the honeycomb aluminum is only 3.6%, suggesting that the yield strength of the honeycomb aluminum and the connecting diaphragm thickness have a limited influence on the crashworthiness design of the anti-climb energy-absorbing device. Furthermore, a multi-objective surrogate model characterizing the specific energy absorption and maximum peak force was established for the aforementioned four influential parameters using the response surface method. The model was then optimized using a genetic algorithm, resulting in optimal parameters that increased the energy absorption and specific energy absorption by 27.3% and 13.8%, respectively, compared to the original values, leading to a significant improvement in crashworthiness. The findings provide valuable references for and insights into the crashworthiness design and optimization of subway vehicles’ anti-climb energy-absorbing devices.

Crashworthiness Study of a Subway Vehicle Collision Accident Based on Finite-Element Methods

Finite Element Analysis on the Lateral Crashworthiness of Car Body Structure

Numerical and experimental study on the design strategy of a new collapse zone structure for railway vehicles

Analysis and Improvement for Key Parts of Car Based on Frontal Crashworthiness Simulation

A crashworthiness optimization method of subway underframe structures based on the differential evolution of the weighted graph representation

Evaluation of coupled finite element/meshfree method for a robust full-scale crashworthiness simulation of railway vehicles

An Investigation of a Locomotive Structural Crashworthiness Using Finite Element Simulation

Energy Absorption Characteristics and Parameter Optimization of Anti-Climb Energy-Absorbing Devices for Subway Vehicles under Impact Loads

Experimental and numerical study on the lightweight design of load-bearing energy absorption structure for subway train

Parallel Analysis of Minibus Crashworthiness Improvements

Improving Design for Crashworthiness of a Minibus

Finite Element Analysis on Rollover Crashworthiness of a Bus

An investigation into post-derailment self-protection mechanisms for railway vehicles

State-of-the-art Research Development of Rail Vehicles Crashworthiness

Study on Straddled-type Monorail Vehicle Driver's Injury Caused by the Secondary Impact

Simulation Analysis of Inner Force Characteristics of Car Body Thin-walled Beam Structures Subject to Lateral Impact

Patient Experiences of Therapeutic Jaw Exercises in the Treatment of Masticatory Myofascial Pain: A Qualitative Study.

Frontal crashworthiness structure analysis and optimization of electric vehicle

Crashworthiness analysis and design optimization of square aluminum/CFRP hybrid structures under quasi-static axial loading

Influencing factors investigation of passenger head injury in subway collisions

Numerical study of mechanical response of shield tunnel under vehicle collision