Abstract:Installation of baffles in bioreactor is a promising method to improve the gas-liquid mass transfer. This work aims to understand the effect of arc baffle ('n' and 'u' shape) on gas-liquid mass transfer in flat-plate bubble column. Based on the numerical approach, the effects of three parameters of arc baffles on the CO2 gas-liquid mass transfer were studied, i.e., the projection length of baffle (L = 40, 60, 80 mm), the curvature radius of baffle (R = 50, 70, 90 mm and horizontal baffle means R = infinity mm) and the bottom clearance (H = 50, 100, 150, 200, 250, 300 mm). The mass transfer model was validated, the experimental and numerical results are in good agreement at gas flow rate of 1 to 3 L min-1. The results indicated that the overall volumetric mass transfer coefficient (KLa) for the 'n' and 'u' shape baffles both increased with the increasing L and H. For the 'u' shape baffle, the effect of R on K(L)a is low. Whereas, for the 'n' shape baffle, the K(L)a increased with the decreasing R. In addition, the results showed that the K(L)a of flat-plate bubble column with the 'n' shape baffle (L = 80 mm, R = 50 mm) can be increased by 44.5-170% compared with that with the horizontal baffle. (C) 2020 Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.

Influence of Arc Baffle Configuration on Gas–liquid Mass Transfer in Flat-Plate Bubble Column