Abstract:Passivating contact solar cells have gradually become the mainstream cell technology due to their excellent performance, and further improving the conversion efficiency has become a focus of subsequent research. Typically, achieving excellent field-effect passivation and low contact resistivity in doped polycrystalline silicon (poly-Si) solar cells requires heavy phosphorus doping. However, this approach can lead to a predicament where excessive phosphorus diffuses into the Si substrate during annealing, causing recombination losses. To address this challenge, a tandem passivation contact structure incorporating an intrinsic amorphous silicon (a-Si ( i)) film within the passivation layers is introduced to retard the diffusion of phosphorus into the Si substrate. Comprehensive characterizations of the tandem structure were carried out to delve into the underlying mechanisms of films with the integrated a-Si ( i) layer, including simulations, surface microscopy, active dopants profiling, crystallographic structure, chemical bonding, elemental distribution, and electrical properties. Simulations revealed that the inserted intrinsic layer effectively counteracts the clustering of phosphorus atoms, leading to a more even distribution during crystal growth. Furthermore, active dopant profiles indicate the potential of the introduced a-Si ( i) layer to tailor the in-diffused dopant profile. Microscopy investigations revealed the occurrence of blistering when the a-Si ( i) thickness exceeds 30 nm. Passivation and contact performances of TOPCon solar cells were assessed as the a-Si ( i) thickness was varied. Notably, optimal electrical properties were achieved with 20 nm a-Si ( i) thickness. At this thickness, the implied open-circuit voltage ( iV) of the hydrogenated lifetime sample was promoted to more than 736.6 mV on the polished wafer, corresponding to the lowest single-side saturation current density ( J) of 4.3 fA/cm . In addition, a low contact resistivity of 1.4 mΩ·cm was achieved. Based on this tandem passivation contact structure, industrial-sized TOPCon solar cells were fabricated, giving an average efficiency of 23.83%, 0.25% higher than that of the baseline counterparts on the production line. The above results demonstrate the role of the a-Si ( i) film as a buffer layer, retarding the diffusion of phosphorus into the Si substrate and obtaining a better passivation effect. This enables us to further tailor the doping profile for high-efficiency solar cells. Our work thus highlights a promising strategy to improve the performance of TOPCon solar cells and showcases its potential for implementation in industrial manufacturing.

Status and Prospective of High-Efficiency C-Si Solar Cells Based on Tunneling Oxide Passivation Contacts

Theoretical exploration towards high-efficiency tunnel oxide passivated carrier-selective contacts (TOPCon) solar cells

Unraveling the Passivation Mechanisms of C-Si/Siox/Poly-Si Contacts

Crystalline Silicon (c-Si)-Based Tunnel Oxide Passivated Contact (TOPCon) Solar Cells: A Review

A Review on p-Type Tunnel Oxide Passivated Contact (TOPCon) Solar Cell

Numerical Simulation and Experiment of a High-Efficiency Tunnel Oxide Passivated Contact (TOPCon) Solar Cell Using a Crystalline Nanostructured Silicon-Based Layer

Ultra-thin silicon oxide tunnel layer passivated contacts for screen-printed n-type industry solar cells

Recent advancements in poly-Si/SiOx passivating contacts for high-efficiency silicon solar cells: Technology review and perspectives

Patent Analysis of High Efficiency Tunneling Oxide Passivated Contact Solar Cells

Silicon‐based passivating contacts: The TOPCon route

Novel Tandem Passivated Contact Approach for High-Efficiency Industrial TOPCon Solar Cells

A silicon oxide-based highly transparent passivating contact for crystalline silicon solar cells approaching efficiencies of 23%

Simulation of Silicon Solar Cells with Passivation Contact of Tunnel Oxide Layer

Computational analysis of a high-efficiency tunnel oxide passivated contact (TOPCon) solar cell with a low-work-function electron-selective-collection layer

Highly passivated TOPCon bottom cells for perovskite/silicon tandem solar cells

Thermal annealing effects on tunnel oxide passivated hole contacts for high-efficiency crystalline silicon solar cells

High-efficiency n-TOPCon bifacial solar cells with selective poly-Si based passivating contacts

Analysis of passivation property using thin Al2O3 layer and simulation for realization of high-efficiency TOPCon cell

Screen-printed n-type industry solar cells with tunnel oxide passivated contact doped by phosphorus diffusion

Mass production of crystalline silicon solar cells with polysilicon‐based passivating contacts: An industrial perspective