Abstract:The total global production of lithium-ion batteries (LIBs) used in electric vehicles and stationary energy storage devices has increased sharply to reach the targeted Net Zero by 2050. This leads to concerns about the future and long-term availability and cost of critical raw materials (cobalt, nickel, lithium and copper) employed in LIBs. Therefore, alternative new-generation batteries with comparable performance but using less critical raw materials are needed. Sodium-ion Batteries (NIBs) offer a wealth of possibilities for inexpensive and sustainable energy storage devices. To maximize their potential, new cathode materials with high energy densities and stable structures are required. Cobalt-free sodium transition metal oxides of O3 type are a predominant cathode for NIBs due to their appreciable specific capacity, reduction in the use of critical elements, and the potential to rival LiFePO 4 in terms of energy density. However, rapid capacity fading caused by serious structural and interfacial degradation hamper this process. Herein, we provide a novel Sn-modified O3-type NaNi 1/3 Fe 1/3 Mn 1/3 O 2 cathode with improved high-voltage stability by bulk Sn doping and surface coating simultaneously. The bulk substitution of Sn 4+ stabilizes the crystal structure by alleviating the irreversible high voltage phase transition and lattice structure degradation. In the meantime, the spontaneously formed tin rich surface layer effectively inhibits surface parasitic reactions and improves interfacial stability during cycling. As a result, the Sn-modified NaNi 1/3 Fe 1/3 Mn 1/3 O 2 cathode exhibited excellent cycling performance by an almost doubled capacity retention increase after 200 cycles within 2.0-4.1V. The influence of Sn modification on the crystal structure and electrochemical properties has been investigated for the first time, and the mechanism was studied through an extensive analysis by in situ XRD, HRTEM, FIB-SEM, XPS and Mössbauer spectroscopy. This work offers an industrially feasible strategy to simultaneously stabilize the bulk structure and interface for O3-type layered cathodes for SIBs and raises the possibility of similar effective strategies to be employed for other energy storage materials Figure 1

Sn and Na Co‐doping to Suppress Voltage Decay of Li‐rich Layered Oxide

Spinel LiMn2O4 integrated with coating and doping by Sn self-segregation

Reduced Lithium/Nickel Disorder Degree of Sodium‐Doped Lithium‐Rich Layered Oxides for Cathode Materials: Experiments and Calculations

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Building oxygen-rich vacancy coating for fast Li-ion diffusion kinetics and stable cycling of lithium-rich layered oxide cathode at wide-temperature

Realization High-Voltage Stabilization of O3-Type Layered Oxide Cathodes for Sodium-Ion Batteries by Sn Simultaneously Dual Modification

Profiting the Co-Modifications of Li 2 SnO 3 Coating and Sn 4+ Doping in Co-Free Ni-Rich Cathode Particles for Lithium-Ion Batteries

Boosting cationic and anionic redox activity of Li-rich layered oxide cathodes via Li/Ni disordered regulation

Achieving high structure and voltage stability in cobalt-free Li-rich layered oxide cathodes via selective dual-cation doping

Dual-element substitution induced integrated defect structure to suppress voltage decay and capacity fading of Li-rich Mn-based cathode

Structure engineering with sodium doping for cobalt-free Li-rich layered oxide toward improving electrochemical stability

Sn-Doping and Li2SnO3 Nano-Coating Layer Co-Modified LiNi0.5Co0.2Mn0.3O2 with Improved Cycle Stability at 4.6 V Cut-off Voltage

Unraveling Na and F Coupling Effects in Stabilizing Li, Mn-rich Layered Oxide Cathodes Via Local Ordering Modification

Tuning Anionic Redox Activity and Reversibility for a High‐Capacity Li‐Rich Mn‐Based Oxide Cathode via an Integrated Strategy

High-Voltage Stabilization of O3-Type Layered Oxide for Sodium-Ion Batteries by Simultaneous Tin Dual Modification

In Situ Formed Heterostructure Interface and Well-Tuned Electronic Structure Ensuring Long Cycle Stability for 4.9 V High-Voltage Li-Rich Layered Oxide Cathodes

Structural Origin of Suppressed Voltage Decay in Single-Crystalline Li-Rich Layered Li[Li0.2 Ni0.2 Mn0.6 ]O2 Cathodes.

Enhancing the structural stability of Ni-rich layered oxide cathodes with a preformed Zr-concentrated defective nanolayer.

Towards Improved Structural Stability and Electrochemical Properties of a Li-rich Material by a Strategy of Double Gradient Surface Modification

Reinforcing the Stability of Cobalt-free Lithium-rich Layered Oxides via Li-poor Ni-rich Surface Transformation

Sno2 Coating to Stabilize Mn-Based Layered Oxide Cathode Materials for Sodium-Ion Batteries