Abstract:The role of mechanistic (shear stress) and thermal wall conditions on the scenario of finger-shaped flame acceleration at the early stages of burning in channels is studied by means of computational simulations of the reacting flow equations involving fully compressible hydrodynamics, transport properties (heat conduction, diffusion, and viscosity), and chemical kinetics imitated by a one-step Arrhenius reaction. Specifically, free-slip walls (i.e., no shear stress at the walls) or nonslip walls (with shear stress) are considered as the mechanistic conditions, while the options for the thermal boundaries include adiabatic walls or isothermal walls of various temperatures. The parametric study involves variations of the channel widths, the thermal expansion ratios, and isothermal wall temperatures for the cases of both slip and nonslip wall conditions. It is shown that the difference between the effects of slip and nonslip walls is generally small during the early stages of burning, before a flame skirt contacts a sidewall. Thereafter, wall friction may play the role; in particular, it may distort or even prevent the formation of a tulip flame front. As for the thermal boundaries, while the finger flame dynamics in adiabatic channels is oftentimes similar to that in isothermal ones, the wall temperature has an impact on flame acceleration such that a flame tends to accelerate faster in hotter channels. Moreover, for isothermal walls preheated to a high temperature, emergence and propagation of an octopuslike flame front are observed. This feature is devoted to the formation of the secondary flame segments near very hot sidewalls, due to a high wall temperature. The impact of thermal expansion on the flame acceleration rate is significant for any wall conditions; it is slightly stronger for isothermal walls, and the flame front approaches the sidewalls faster at a lower thermal expansion ratio. Variation of the channel width shows a small impact in the case of adiabatic walls as well as preheated isothermal walls, but it provides a significant influence on flame propagation in a channel with isothermal walls kept at an initial fuel temperature. At the same time, the role of the channel width is practically the same for both slip and nonslip walls. Overall, the present work verifies and underlines the limitations of the previous theoretical models and computational studies of finger flame acceleration that employed adiabatic slip walls.

Numerical Study of the Influence of Wall Roughness on Laminar Boundary Layer Flashback

Interactions of Turbulence and Flame During Turbulent Boundary Layer Premixed Flame Flashback under Isothermal and Adiabatic Wall Conditions Using Direct Numerical Simulation

Numerical Study of the Influence of the Thermal Gas Expansion on the Boundary Layer Flame Flashback in Channels with Different Wall Thermal Conditions

Study of Flame–flow Interactions in Turbulent Boundary Layer Premixed Flame Flashback over a Flat Plate Using Direct Numerical Simulation

Wall-impinging laminar premixed n-dodecane flames under autoignitive conditions

Effects of Soret and Differential Diffusion on Boundary Layer Flashback of H2/CH4 Swirling Flames

Direct Numerical Simulation of Premixed Flame Boundary Layer Flashback in Turbulent Channel Flow

Numerical investigation of boundary layer flashback of CH 4 /H 2 /air swirl flames under different thermal boundary conditions in a bluff‐body swirl burner

Strain Rate Effects on Head-on Quenching of Laminar Premixed Methane-air Flames

Combined Impact of the Lewis Number and Thermal Expansion on Laminar Flame Flashback in Tubes

Impacts of Wall Conditions on Flame Acceleration at the Early Stages of Burning in Channels

Three-dimensional shock–flame interactions: effect of wall friction

Effects of laminar burning velocity to friction velocity ratio on turbulent premixed flame-wall interaction within turbulent boundary layers

Reassessing the 2-D velocity boundary effect on the determination of extinction stretch rate and laminar flame speed using the counterflow flame configuration

Experimental and Numerical Studies on the Wall-Roughness Effect to Particle Dynamics in Various Gas-Particle Flows

Turbulence/flame/wall interactions in non-premixed inclined slot-jet flames impinging at a wall using direct numerical simulation

Experimental Investigation of Flow Drag and Turbulence Intensity of A Channel Flow with Rough Walls

Modeling of Mean Flame Shape During Premixed Flame Flashback in Turbulent Boundary Layers

Experimental Study on Flame Morphologic Characteristics of Wall Attached Non-Premixed Buoyancy Driven Turbulent Flames

Modeling the boundary-layer flashback of premixed hydrogen-enriched swirling flames at high pressures

Effect of Wall Heat Transfer on the Dynamics of Premixed Spherical Expanding Flames