Lithium Metal Anode: Processing and Interface Engineering

Stefan Kaskel,Qiang Zhang,Xueliang Sun

DOI: https://doi.org/10.1002/batt.202100068

2021-01-01

Batteries & Supercaps

Abstract:Making a comeback: After falling into oblivion for some decades, the use of metallic Li for next-generation Li batteries has become a hot topic in the last few years. This special collection features review-type and original articles providing new insights into state-of-the-art technologies for system integration using metallic Li. Targeting higher energy density and higher specific energy, the introduction of the lithium metal anode in working batteries is among the key challenges and aims for energy storage applications that require higher energy densities, such as next-generation urban mobility and electric aircrafts. The global significant research across the world is addressing this topic for a wide range of cathodes and cell types. Not only oxide-based cathodes but also sulfur batteries and emerging energy chemistries are enabled by the lithium metal anode. For all-solid-state batteries lithium metal anodes are fundamental. Research progress in both academia and industry has led to emerging enterprises and systems on the verge of commercialization. However, many fundamental challenges remain: dendritic or mossy lithium growth, dead lithium formation, irreversible electrolyte consumption, etc., need to be suppressed. Both chemical and mechanical factors are interconnected and lead to complex degradation phenomena. The high reactivity of the metal surface hampers progress in understanding and commercial implementation. Exploring such technologies requires interdisciplinary approaches covering interface design, electrolyte innovation, understanding dendrite suppression, the development of porous hosts and many more. Moreover, modeling such complex interfaces by in silico design is still in a state of infancy. The current Special Collection features 5 reviews and 8 original articles affords new insights into state-of-the-art technologies for system integration. Park and co-workers highlight the decisive role of interface engineering in his review (10.1002/batt.202000016), whereas Nojabaee et al. provide a more fundamental view of the solid–electrolyte interphase (SEI) formation on lithium metal anodes. Brandell and co-workers give insights into surface analysis of lithium-sulfur batteries through in depth XPS insights. In contrast, Tao and co-workers demonstrate how polysulfides can be blocked from the anode using MXene coatings. Kang et al. elaborate further in their review on the deliberate control of artificial SEI formation. The minireview by Zhang and co-workers addresses important benefits of garnet coatings as interfacial layers. As an alternative to traditional chemical approaches, Rangasamy and Vanhulsel highlight the potential of plasma surface processing for interfacial control. Several additional original articles in this Special Collection demonstrate the continuous scientific progress in this timely field defying the pandemic. The major trends are focusing on controlling lithium deposition and interfacial control. An example is the contribution by Liu and co-workers, in which lithium deposition is regulated by coating copper current collectors. One of the most advanced lithium metal batteries in terms of understanding and technology readiness level is based on the lithium sulfur system. Another major area of research are solid state batteries, for example, Zhang and co-workers describe the all-solid-state batteries with slurry-coated sulfur/sulfide cathode, Li and Nan's group presented the role of residual solvent in the PVDF based electrolyte in working batteries, and Ye and co-workersYe and co-workers probed the role of ionic liquid in the triazine frameworks-based quasi-solid-state electrolyte. Lithium sulfur battery technology is also advanced worldwide while the Li metal protection is quite the challenge. Kaskel and co-workers found the addition of polysulfides decreases and stabilizes the overpotential in Li/Li cells and therefore delays the cell degradation. The application of composite Li metal anode and Li alloy is strongly considered. Herein, Li and co-workers present the fast Li+ transport of Li−Zn alloy protective layer. There is plenty of space in the field of processing and interface engineering of Li metal anodes in future. The Special Collection nicely illustrates the current status, challenges and future directions in the emerging field of lithium metal anode technology. To close, we would like to express our sincere thanks to the editorial team of Batteries & Supercaps, in particular Dr. Rosalba A. Rincón and Dr. Greta Heydenrych. All the authors and reviewers are highly appreciated for their great contribution to this high-quality collection. Stefan Kaskel studied chemistry and received his Ph.D. degree in 1997 at Eberhard Karls University, Tübingen (Germany). As a Feodor-Lynen Fellow of the Alexander von Humboldt foundation he worked with John Corbett at Ames Laboratory, USA (1998–2000) on intermetallic compounds. He was a group leader at the Max-Planck-Institut für Kohlenforschung in Mülheim a.d. Ruhr (2000-2004) in the group of Ferdi Schüth and after his habilitation at Ruhr University (Bochum) in 2004 in the area of heterogeneous catalysis, he became full professor for Inorganic Chemistry at Technical University Dresden. Since 2008 he is also business field leader at Fraunhofer IWS, Dresden. His research interests are focused on porous and nanostructured materials (synthesis, structure, function) for applications in energy storage, batteries, catalysis, and separation technologies. Qiang Zhang received his B.Sc. and Ph.D. degrees from Tsinghua University in 2004 and 2009 and then he stayed at the Case Western Reserve University, USA, and the Fritz Haber Institute of the Max Planck Society, Germany. He was appointed as a faculty member at Tsinghua University in 2011. He held the Newton Advanced Fellowship from Royal Society, UK and the National Science Fund for Distinguished Young Scholars. His current research interests are advanced energy materials, including lithium metal anode, lithium sulfur/oxygen batteries, and electrocatalysis. Andy (Xueliang) Sun is a Full Professor and senior Canada Research Chair (Tier I) at the University of Western Ontario, Canada. He is a Fellow of Royal Society of Canada and Fellow of the Canadian Academy of Engineering. He received his Ph.D. degree in Materials Chemistry at the University of Manchester, UK, in 1999. His research is focused on advanced materials for energy conversion and storage including Li batteries and fuel cells.