Abstract:The research explores the possibility of utilizing carbon dioxide to modify the properties of recycled brick powder (RBP) and enhance the engineering performances of RBP-mortar. The RBP, crushed to the size range of 0.075 to 4 mm, is carbonated by exposing to 5% CO2 for 4 h and characterized for phase composition, porosity and micro-structure. The non-carbonated RBP (RBP) and pre-carbonated RBP (Carb-RBP) are applied to replace 25% and 75% of manufactured sand (M-sand) in cement mortars maintained at similar flow level (110 – 113%), which are then cured under three conditions - (i) ambient condition (N), (ii) 4 h of steam curing followed by moist and dry curing (STC), and (iii) accelerated CO2 curing (5% CO2 of 99% purity) for 4 h followed by moist curing and dry curing (CC). Physico-chemical characterizations suggest that Carb-RBP has higher micro-pore volume and surface area contributed by pores in the size range of 1 nm to 3 nm than RBP. After carbonation, the reactivity of RBP in alkaline environment is increased due to CO2-induced breakdown of calcium and alumino-silicate minerals into calcium carbonate and silica gel. Due to addition of 25% and 75% RBP and Carb-RBP, hydration kinetics is accelerated by 4 – 4.50 h compared to control due to nucleation of hydration products on the surfaces of RBP. Faster precipitation of hydration products, more micro-pore sites in RBP and higher porosity due to increased water demand enhance the carbon sequestration in RBP-mortars and Carb-RBP mortars by 30–82% compared to control (0% RBP). Use of Carb-RBP to replace 25% of M-sand offer similar compressive strength as control and 19 – 21% higher strength than mortars with RBP (non-carbonated). CO2 curing also reduces the total shrinkage of mortars with recycled brick powder by 12 – 17% compared to ambient curing and steam curing due to densification by calcium carbonate crystals. The findings from this research strongly suggests a significant reduction in embodied carbon of Portland cement-based construction materials by utilizing a combined approach of carbon sequestration and replacement of fine aggregates by recycled brick powder.

New Perspectives on Utilization of CO2 Sequestration Technologies in Cement-Based Materials

Sustainable Building Material from CO2 Mineralization Slag: Aggregate for Concretes and Effect of CO2 Curing

Carbonation Curing of Industrial Solid Waste‐based Aerated Concretes

Microstructure Refinement of Calcium-Sulfate-aluminate and Portland Cement (CSA-PC) Hybrids with Accelerated CO2 Curing (ACC)

Enhanced Carbonation Curing of Cement Pastes with Dolomite Additive

An Overview on the Influence of Various Parameters on the Fabrication and Engineering Properties of CO2-cured Cement-Based Composites

Strategies to accelerate CO2 sequestration of cement-based materials and their application prospects

Utilization of solid wastes to sequestrate carbon dioxide in cement-based materials and methods to improve carbonation degree: A review

Review on CO2 curing of non-hydraulic calcium silicates cements: Mechanism, carbonation and performance

Accelerated Mineral Carbonation Curing of Cement Paste for CO2 Sequestration and Enhanced Properties of Blended Calcium Silicate

Unlocking the Role of Recycled Aggregates in the Performance Enhancement and CO2 Capture of Reactive Magnesia Cement Formulations

An overview of utilizing CO2 for accelerated carbonation treatment in the concrete industry

Fundamental understanding of carbonation curing and durability of carbonation-cured cement-based composites: A review

Effects of early-age carbonation curing on the properties of cement-based materials: A review

Sequestration and utilization of carbon dioxide to improve engineering properties of cement-based construction materials with recycled brick powder: a pathway for cleaner construction

Roles of carbonated recycled fines and aggregates in hydration, microstructure and mechanical properties of concrete: A critical review

Experimental study on the macroscopic and microscopic properties of cement paste backfill after treatment with carbon dioxide carbonize filling slurries during the mixing process

Use of carbonated water to improve the mechanical properties and reduce the carbon footprint of cement-based materials with recycled aggregates

Use of Carbonation Curing to Improve Mechanical Strength and Durability of Pervious Concrete

Internal carbonation curing base on molecular sieve: Influence and mechanism on cement-based materials

CO2 mineralization of demolished concrete wastes into a supplementary cementitious material – a new CCU approach for the cement industry