Abstract:Packed fixed-bed reactors are traditionally used for heterogeneous catalytic ozonation. However, a high solid-to-liquid requirement, poor ozone dissolution, ineffective utilization of catalyst surface area, and production of large amounts of catalyst waste impede application of such reactors. In this study, we designed a suspension catalytic ozonation reactor and compared the performance of this reactor with that of a traditional fixed-bed catalytic ozonation reactor employing oxalic acid (OA) as the target contaminant. Our results showed that total O3 dissolved into the suspension reactor (117-134 mg.L-1) was much higher compared to that measured in the fixed-bed reactor (53 mg.L-1) due to a higher O3(g) interphase mass transfer rate in the suspension reactor. In accordance with the higher O3(g) interphase mass transfer, we observed a much higher proportional OA removal (32 %) compared to that achieved in the fixed-bed reactor (10%) employing an Fe-oxide catalyst supported on Al2O3 (Fe-oxide@Al2O3) in both reactors. Use of a double-layered Cu-Al hydroxide (Cu-Al LDHs) catalyst in the suspension reactor further enhanced the performance with nearly 90 % OA removal observed. Given the superior performance of the suspension reactor, we investigated the impact of operating conditions (catalyst dosage, hydraulic retention time and ozone dosage) employing Cu-Al LDHs as the catalyst. We also developed a mathematical kinetic model to describe the performance of the suspension reactor and, through use of the kinetic model, showed that O3(g) interphase transfer rate was the rate-limiting step in OA removal. Thus, improvement in ozone gas diffuser design is required to improve the performance of the suspension reactor. Overall, the present study demonstrated that suspension reactors were more effective than fixed-bed reactors for oxidation of surface-active organic compounds such as OA due to the higher ozone interphase mass transfer rate and effective utilization of the catalyst surface area that can be achieved. As such, further research on suspension reactor design and development of catalysts suitable for use in suspension reactors should facilitate large-scale application of catalytic ozonation processes by the wastewater treatment industry.

Continuous Catalytic Ozonation of Antibiotics Using Mn and Cu Oxides on -Al<sub>2</sub>O<sub>3</sub> Pellets in a Micropacked Bed Reactor

Highly Efficient Degradation of Pharmaceutical Sludge by Catalytic Wet Oxidation Using CuO-CeO2/γ-Al2O3 As a Catalyst

Catalytic Ozonation Treatment of Polar Antibiotics with Cu-Ce Modified Γ-Al2o3 Catalysts: Ph Effects and Removal Mechanism

Highly stable and efficient calcined γ-Al2O3 catalysts loaded with MnOx-CeOx for the ozonation of oxytetracycline

Mn Anchored Zeolite Molecular Nest for Enhanced Catalytic Ozonation of Cephalexin.

Synergistic Catalysis of Ozonation and Photooxidation by Sandwich Structured MnO2-NH2/GO/p-C3N4 on Cephalexin Degradation

Heterogeneous catalytic ozonation for the removal of antibiotics in water: A Review

Activation of Peroxymonosulfate by CoS2 Loaded Air-Laid Cloth for Rapid Degradation of Organic Pollutants in a Shallow Continuous Flow Reactor

Amino-functionalized Synthesis of MnO2-NH2-GO for Catalytic Ozonation of Cephalexin

Heterogeneous catalytic ozonation of sulfamethazine in aqueous solution using maghemite-supported manganese oxides

Enhanced Catalytic Ozonation by Mn-Ce Oxide-Loaded Al2O3 Catalyst for Ciprofloxacin Degradation

Degradation of organic pollutants in groundwater treatment based on catalytic ozonation technology

Preparation of Sodium Alginate Gel Microspheres Catalysts and its High Catalytic Performance for Treatment of Ciprofloxacin Wastewater

A thorough observation of an ozonation catalyst under long-term practical operation: Deactivation mechanism and regeneration

Enhanced Catalytic Ozonation of Phenol Degradation by Mn-Loaded γ-Al2O3 Catalyst: A Facile Strategy for Treating Organic Wastewater

Pilot test of Mn-Fe/Al2O3 catalytic ozonation in tertiary wastewater treatment

Catalytic Ozonation of Industrial Wastewater Containing Chloro and Nitro Aromatics Using Modified Diatomaceous Porous Filling

Catalytic ozonation of chloramphenicol with manganese-copper oxides/maghemite in solution: Empirical kinetics model, degradation pathway, catalytic mechanism, and antibacterial activity

Performance evaluation and optimization of a suspension-type reactor for use in heterogeneous catalytic ozonation

Cu2(OH)3NO3/γ-Al2O3 catalyzes Fenton-like oxidation for the advanced treatment of effluent organic matter (EfOM) in fermentation pharmaceutical wastewater: The synergy of Cu2(OH)3NO3 and γ-Al2O3

Design, preparation, characterization, and application of MnxCu1-xOy/γ-Al2O3 catalysts in ozonation to achieve simultaneous organic carbon and nitrogen removal in pyridine wastewater