Abstract:In this work, tannic acid (TA)-functionalized carbon nanotubes () were synthesized by hydrogen bond and π–π stacking interactions. embedded with silver nanoparticles () was obtained by in situ reducing silver ammonia ions in the pore channels of and were added into the polyamide (PA) layer by interfacial polymerization to fabricate high-performance nanocomposite reverse osmosis membranes. The results show that the functionalized CNTs can be uniformly distributed in the PA matrix with random orientations. A loose PA separation layer was obtained by introducing Correspondingly, abundant new water channels were formed. Compared with the pure PA membrane, the water permeability (4.81 L m–2 h–1 bar–1) of the nanocomposite membrane is enhanced by 49.8% without any loss in NaCl rejection (99.3%). The membrane exhibits satisfactory chemical- and bio-fouling resistances to bovine serum albumin and Escherichia coli as model foulants. The high bactericidal rate should be ascribed to the formation of the TA coating and confined Ag nanoparticles in CNT channels. The confined structure effectively avoids the leaching out of the Ag nanoparticles and keeps the persistence of the antibacterial property. The excellent compatibility between the CNTs and the polyamide matrix endows the membrane with long-term performance stability.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c03313.Experimental procedure of the antibacterial property of the membranes; optical photographs of the uncoated CNT, , and samples dispersed in deionized water; EDX spectrum of the sample; three-dimensional AFM and SEM images of the fabricated various membranes; permeate fluxes and salt rejections of the PA/ membranes with different amounts of the incorporated in 2% MPD solution; formed bacterial colonies by 24 h growth on the agar culture medium after E. coli suspension contacting with the fabricated various membranes; arithmetic average value (Ra) and root-mean-square value (Rq) of the membrane surface roughness from AFM measurements; flux decline rate (Fdr), flux recovery rate (Frr), and irreversible decline rate (Firr) in each fouling cycle for the fabricated PA-based membranes using 100 mg/L BSA as a foulant solution; resistance values from the concentration polarization (rcp) and the reversible (rrf) and irreversible (rif) fouling resistance values of the fabricated PA-based membranes, respectively, using 100 mg/L BSA and 10 mg/L HA as foulant solutions (PDF)This article has not yet been cited by other publications.

Thin-Film Composite Polyamide Membranes with in Situ Attached Ag Nanoparticles for Fouling-Mitigated Wastewater Treatment

Hydrophilic Modified Polydopamine Tailored Heterogeneous Polyamide in Thin-Film Nanocomposite Membranes for Enhanced Separation Performance and Anti-Fouling Properties

A Novel Thin-Film Nano-Templated Composite Membrane with in Situ Silver Nanoparticles Loading: Separation Performance Enhancement and Implications

Preparation and Characterization of an Amphiphilic Polyamide Nanofiltration Membrane with Improved Antifouling Properties by Two-Step Surface Modification Method

Thin-Film Nanocomposite Membrane Incorporated by Ag-Mof: Improvement of Resistance to Biofouling for Dye Separation

Anti-biofouling Nanofiltration Membrane Constructed by In-Situ Photo-Grafting Bactericidal and Hydrophilic Polymers

Outstanding Anti-Bacterial Thin-Film Composite Membrane Prepared by Incorporating Ag-Mof for Water Treatment

Engineering polyamide nanofiltration membrane with bifunctional terpolymer brushes for antifouling and antimicrobial properties

Improving antifouling performance of FO membrane by surface immobilization of silver nanoparticles based on a tannic acid: diethylenetriamine precursor layer for municipal wastewater treatment

Fabrication of Polyamide Thin-Film Nanocomposite Reverse Osmosis Membrane with Improved Permeability and Antibacterial Performances Using Silver Immobilized Hollow Polymer Nanospheres

Engineering of Ag-nanoparticle-encapsulated intermediate layer by tannic acid-inspired chemistry towards thin film nanocomposite membranes of superior antibiofouling property

Incorporation of oleic acid-modified Ag@ZnO core-shell nanoparticles into thin film composite membranes for enhanced antifouling and antibacterial properties

Incorporation of Silver-Embedded Carbon Nanotubes Coated with Tannic Acid into Polyamide Reverse Osmosis Membranes toward High Permeability, Antifouling, and Antibacterial Properties

Modification of polyamide TFC nanofiltration membrane for improving separation and antifouling properties

Tannic Acid Coating and in Situ Deposition of Silver Nanoparticles to Improve the Antifouling Properties of an Ultrafiltration Membrane

In Situ Chemical Modification with Zwitterionic Copolymers of Nanofiltration Membranes: Cure for the Trade-Off between Filtration and Antifouling Performance

Versatile Surface Modification Of Tfc Membrane By Layer-By-Layer Assembly Of Phytic Acid-Metal Complexes For Comprehensively Enhanced Fo Performance

Constructing Membrane Surface with Synergistic Passive Antifouling and Active Antibacterial Strategies Through Organic-Inorganic Composite Modifier

Antifouling and High Flux Sulfonated Polyamide Thin-Film Composite Membrane for Nanofiltration

Outstanding anti-bacterial thin-film composite membrane prepared by incorporating silver-based metal–organic framework (Ag-MOF) for water treatment

Thin-Film Composite Nanofiltration Membrane Modified by Fulvic Acid to Enhance Permeability and Antifouling Performance