Abstract:Nylon 6 (PA6) with excellent fracture toughness and hygrothermal resistance is added to the high-strength/modulus carbon fiber reinforced epoxy resin as a filler, which is expected to signally improve the thermal and mechanical properties. In the present paper, epoxy resin was reinforced by short carbon fibers and PA6 fillers of different content, and nylon 6 modified carbon fiber-epoxy resin (PA6CFEP) composite was successfully prepared. Water absorption behavior, thermal and mechanical performance evolution, degradation mechanism, as well as micro-structure and micro-morphology analysis of PA6CFEP before and after hygrothermal aging at 20/40/60 °C for 120 days were discussed and analyzed. The results showed that the water absorption law of PA6CFEP immersed in water solution accorded with the modified Fick's diffusion model, and the quasi-equilibrium water absorption ( M ∞ ) was 3.49%. Additionally, the maximum water absorption ( M max ) and diffusion coefficient ( D ) of the sample at 60 °C increased by 45.98% and 6.39% compared with those at 20 °C. Based on the optimal PA6 content (7.5 wt%), the fracture toughness of PA6CFEP-7.5 was 198.6% higher than that of the control sample, which was an increase in tensile strength (34.0%) and elongation at break (77.3%). Furthermore, the PA6 addition increased the Tg of PA6CFEP by a maximum percentage of 4.9%, which indicated that PA6 had excellent thermodynamic compatibility with the epoxy resin. After hygrothermal aging of PA6CFEP-7.5 for 120 days at 60 °C, the tensile strength, bending strength and Tg decreased by 36.5%, 38.3% and 16.9% compared to the control samples. This was because water molecules had the etching effect on the polymer chain of the resin, eventually led to the resin hydrolysis and filler/resin interface de-bonding. Finally, the fundamental reason for the degradation of the thermal and mechanical properties of PA6CFEP was that water molecules formed new hydrogen bonds (maximum increase 62.9%) with polymer chains and PA6 fillers, destroying the original cross-linking density of resin in the hygrothermal aging process. The water molecules infiltrated the available space of the resin matrix, leading to a reduction in the inter-chain force of the resin molecules.

Dimensional Stability And Mechanical Performance Evolution Of Continuous Carbon Fiber Reinforced Polyamide 6 Composites Under Hygrothermal Environment

Effects of Hygrothermal Aging and Cyclic Compressive Loading on the Mechanical and Electrical Properties of Conductive Composites

Hygrothermal aging on the mechanical property and degradation mechanism of carbon fiber reinforced epoxy composites modified by nylon 6

The effects of temperature and hygrothermal aging on the properties of CF/PA6 composite and its compression failure mechanisms

Hygrothermal Behavior of Carbon Fiber Fabric Reinforced Vinylester Resin Composite Structures

Effect of hygrothermal aging on mechanical properties of continuous flax fiber composites

Morphological, physicochemical, and flexural characterization of carbon fiber paper–reinforced polyamide 6 for long-term application in aqueous environments

Effect of temperature and cyclic hygrothermal aging on the interlaminar shear strength of carbon fiber/bismaleimide (BMI) composite

An Experimental Investigation of the Mechanism of Hygrothermal Aging and Low-Velocity Impact Performance of Resin Matrix Composites

Hydrothermal aging behavior and effects on carbon fabric/polyphenylene sulfide composite

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

Evolution of microstructure and thermo‐mechanical attributes of fiber reinforced polyamide during fused deposition modeling 3D printing: A comprehensive characterization study

Coronary Sinus Interventions: From Concept to Clinics

Effect of temperature and moisture composite environments on the mechanical properties and mechanisms of woven carbon fiber composites

Hygrothermal Effect on GF/VE and GF/UP Composites: Durability Performance and Laboratory Assessment

Effect of thermal and hydrothermal aging on the crashworthiness of carbon fiber reinforced plastic composite tubes

Mechanical Stability of Carbon/Ramie Fiber Hybrid Composites Under Hygrothermal Aging

Effect of Hydrothermal Environment on Mechanical Properties and Electrical Response Behavior of Continuous Carbon Fiber/Epoxy Composite Plates

Comparison of the effect of thermal and hygrothermal sub-Tg aging on the durability and appearance of multilayered filament wound composite structure

Hygrothermal aging effects on the mechanical behaviors of twill‐woven carbon fiber composite laminates with flame‐retardant epoxy resin

Mechanical Performance of Carbon Fiber/Polyamide 6: Comparative Study Between Conditioning in Distilled Water with Heating and Saline Solution