Abstract:Nanoscaled magnetic copper ferrite (CuFe2O4) is widely used as a peroxymonosulfate (PMS) activator but suffers from agglomeration owing to its inherent magnetic properties and high surface energy. In this work, spinel structured CuFe2O4 anchored on mesoporous alumina (denoted as CFO@AO) were synthesized, characterized, and applied as a PMS activator for the removal of tetracycline hydrochloride (TC center dot HCl). Approximately 97.5 % of TC center dot HCl was decomposed within 10 min in 30 %-CFO@AO (0.2 g/L)/PMS (0.3 g/L) system, and the corresponding kinetic rate constant of 30 %-CFO@AO/PMS (0.417 min - 1) was around 1.57 times higher than that of CuFe2O4/PMS (0.266 min - 1), which indicating that the existence of synergistic catalysis between CuFe2O4 and Al2O3 enhanced the degradation of TC center dot HCl. Moreover, nano -sized CuFe2O4 were successfully anchored on the surface of Al2O3 because of Fe-O-Al bond, which could account for the enhanced catalytic activity, superior pH flexibility, and high chemical stability and reusability of 30 %-CFO@AO. Quenching experimentals, electron paramagnetic resonance, and methyl phenyl sulfoxide (PMSO) chemical probe assays confirmed that both radical oxidation (center dot OH) and non -radical oxidation (1O2 and Fe(IV)--O) were proposed in the developed CFO@AO/PMS system, and center dot OH played a key role in the process. Meanwhile, the PMS activation mechanism by CFO@AO composite was also analyzed based on the results of adsorption energy, which was calculated via DFT. Based on UPLC-MS technique, a possible degradation pathway for TC center dot HCl destruction in 30 %-CFO@AO/PMS system was proposed. The toxicity assessment showed that the catalytic degradation of TC center dot HCl in 30 %-CFO@AO/PMS system reduced the toxicity of most of degradation intermediates. Present work proved that CuFe2O4@Al2O3 composite is an efficient, environment -friendly, and recyclable heterogeneous catalyst for practical wastewater treatment via PMS activation.

Cu Anchored on Manganese Residue Through Mechanical Activation to Prepare a Fe-Cu@SiO2/starch-derived Carbon Composites with Highly Stable and Active Visible Light Photocatalytic Performance

Construction of an interpenetrating manganese residue-derived FeC2O4/CuC2O4 composite with enhanced charge transfer in photo-Fenton reactions via mechanical activation pre-anchoring strategy

Construction of a Stable Cu-Fe@C Composite Catalyst with Enhanced Performance and Recyclability for Visible-Light-driven Photo-Fenton Reaction

Valorization of manganese residue to prepare a highly stable and active Fe3O4@SiO2/starch-derived carbon composite for catalytic degradation of dye waste water

Valorization of manganese residue to prepare a highly stable and active Fe<sub>3</sub>O<sub>4</sub>@SiO<sub>2</sub>/starch-derived carbon composite for catalytic degradation of dye waste water

MCM-41-supported Fe(Mn)/Cu Bimetallic Heterogeneous Catalysis for Enhanced and Recyclable Photo-Fenton Degradation of Methylene Blue

MOF-derived Three-Dimensional Flower-Like FeCu@C Composite As an Efficient Fenton-like Catalyst for Sulfamethazine Degradation

Facile preparation of manganese sand-based monolithic catalysts with excellent catalytic performance and reusability for activation of peroxymonosulfate: The key role of pre-calcination

Activated carbon fiber mediates efficient activation of peroxymonosulfate systems: Modulation of manganese oxides and cycling of manganese species

In Situ Synthesis Of A Stable Fe3o4@Cellulose Nanocomposite For Efficient Catalytic Degradation Of Methylene Blue

Revisiting the multipath elimination of contaminants by carbonyl-containing manganese-carbon composites in the peroxymonosulfate system: A new way of constructing C-Mn-PMS complexes to distinguish the stages of active species production

NaOH-modified biochar supported Fe/Mn bimetallic composites as efficient peroxymonosulfate activator for enhance tetracycline removal

MOFs-derived Mn/C Composites Activating Peroxymonosulfate for Efficient Degradation of Sulfamethazine: Kinetics, Pathways, and Mechanism

Enhanced heterogeneous activation of peroxymonosulfate by boosting internal electron transfer in a bimetallic Fe3O4-MnO2 nanocomposite

In situ N-doped carbon-coated mulberry-like cobalt manganese oxide boosting for visible light driving photocatalytic degradation of pharmaceutical pollutants

Fe-Mn oxycarbide anchored on N-doped carbon for enhanced Fenton-like catalysis: Importance of high-valent metal-oxo species and singlet oxygen

Ferrous and manganese oxalate for efficient heterogenous-Fenton degradation of organic pollutants: composite active site and mechanism perception

MnCo/N-C composite nanomaterials derived from MOFs as peroxymonosulfate activators for highly efficient removal of dyes

Magnetic CuFe2O4 Nanoparticles Immobilized on Mesoporous Alumina As Highly Efficient Peroxymonosulfate Activator for Enhanced Degradation of Tetracycline Hydrochloride

Preparation of FeMn-ZSM-5/MOR composite molecular sieves: combination of adsorption/oxidation and Fenton-like reaction

High-Performance Iron-Doped Molybdenum Disulfide Photocatalysts Enhance Peroxymonosulfate Activation for Water Decontamination