Abstract:The technique based on microtemplated electrowetting is developed to fabricate a high‐performance, reversible octopus‐inspired dry/wet adhesive patch. The microdomes curvature ratio and tip‐spacing of extruded microsuckers can be preciously controlled (from 0.45 to 0.74, 0 to 50 μm, respectively). Strong adhesion ability is achieved through mechanism analysis and morphology‐regulation, demonstrating stable adhesion even when passing through the air–water boundary. Inspired by the prominent adhesion ability of octopus suckers, many dry/wet adhesives with specific micro‐structure have been fabricated for applications in smart robots, manipulators, and medical treatments. However, the reported octopus‐inspired adhesive patches are either suction‐assistant without tight‐sealing, or suction‐sealed but inefficient under both dry/wet environments. Here, a microtemplated electrowetting method is developed for the fabrication of reversible dry/wet adhesive pads consisting of extruded microsuckers with suction‐enhanced microdomes and sealing‐ring tips. The mechanism toward the morphology regulation of microdomes illustrates the uneven electrohydrodynamic force on the liquid–air interface that changes the liquid meniscus and achieves the precise regulation of the microdomes curvature ratio (from 0.45 to 0.74). The tip spacing can be controlled (from 0 to 50 μm) by using different templates. Theoretical and experimental insights into the mechanism of the microdomes morphology and the tip spacing on adhesion are discussed. With optimized microdomes and maximized sealing‐tips, this adhesive patch generates strong and repeatable adhesion on a silicon wafer in both air (≈ 86 kPa) and underwater (≈ 61 kPa) environments. Besides, considerable adhesion to the rough surfaces are also revealed. Its adhesion ability is demonstrated with stable transportation of various objects under air/underwater environments, providing a potential application in cross‐media operation.

Elastic Energy Storage Enabled Magnetically Actuated, Octopus‐Inspired Smart Adhesive

Rapidly tunable and highly reversible bio-inspired dry adhesion for transfer printing in air and a vacuum.

Magnetically Actuated Adhesives with Switchable Adhesion

3D Printing of Octopi-Inspired Hydrogel Suckers with Underwater Adaptation for Reversible Adhesion

A Bioinspired Smart Adhesion Actuator with Fast‐Driving and Self‐Sensing Capability

Magnet-induced deformation enhanced adhesion based on magneto-responsive polymer: Theoretical analysis and experimental verification

Sensing-triggered stiffness-tunable smart adhesives

Acarid Suction Cup‐Inspired Rapid and Tunable Magnetic Adhesion

Triple-Bioinspired Shape Memory Microcavities with Strong and Switchable Adhesion

Magnetic-field-driven Switchable Adhesion of NdFeB/PDMS Composite with Gecko-Like Surface

A Magnet‐Driven Soft Bistable Actuator

Adhesion Performance of Magnetically Responsive Surfaces under Wet Conditions

Microtemplated Electrowetting for Fabrication of Shape‐Controllable Microdomes in Extruded Microsucker Arrays toward Octopus‐Inspired Dry/Wet Adhesion

A Thermal Actuated Switchable Dry Adhesive with High Reversibility for Transfer Printing

Mechanics of Active Elastomeric Surfaces with Tunable Adhesion for Non-Contact Pick-Up and Printing

Octopus‐Inspired Adhesives with Switchable Attachment to Challenging Underwater Surfaces

Octopus-inspired adhesive skins for intelligent and rapidly switchable underwater adhesion

Strong and Highly Switchable Soft Sticky Adhesives

Smart Manipulation of Complex Optical Elements via Contact‐adaptive Dry Adhesives

Liquid-Amplified Electrostatically Driven Octopus Sucker-Inspired Suction Cup

Synergetic adhesion in highly adaptable bio-inspired adhesive