Abstract:Since the period required for testing the atmospheric corrosion of steel is long, most studies have focused on the corrosion behavior in less than three years, making exploring long-term atmospheric corrosion particularly valuable. This study investigates the corrosion behaviors, corrosion models, and mechanical properties of Q235 welded steel pipes collapsing due to corrosion after 25-year service in an urban industrial atmospheric environment using SEM, XRD, electrochemical methods, 3-D noncontact surface profilometry, and static tensile testing. The typical morphologies of & alpha;-FeOOH, & gamma;-FeOOH, and Fe3O4 and the effect of the content of various corrosive materials on the corrosion rate of the steel pipes are identified and analyzed. Then, the influence of different corrosion degrees on the mechanical properties of the steel pipes is examined by considering the morphologies of the rust pits. The results show that the wetting-drying cycles affect the structures of the rust layers and their protective properties. The rust layers on the sheltered surface are thicker but less protective than those on the exposed surface. In the wet state, FeSO4 accelerates ion transfer, while Fe3O4 facilitates electron transfer. These processes collectively contribute to the corrosion of Q235 steel. Moreover, as the time-of-wetness of the rust layers on sheltered specimens increases, the corrosion rate of Q235 steel also accelerates. The corrosion model combines pitting and uniform corrosion and gradually changes from predominated by pitting to thickness as the corrosion degree increases. The corrosion morphology impacts the mechanical properties of the welded steel pipes, and the influences of the thickness loss and maximum rust pit depth on these properties are profound.

The Transformation of Corrosion Products on 0cu2cr Carbon Steel in the Marine

The Evolution of the Corrosion Mechanism of Structural Steel Exposed to the Urban Industrial Atmosphere for Seven Years

Corrosion Behaviors and Mechanical Properties of Q235 Steel Pipes Collapsing Due to Corrosion after 25-Year Service in Urban Industrial Atmospheric Environment

Rust Evolution and Electrochemical Properties of Field-exposed Carbon Steel in a Tropical Marine Environment

Corrosion behavior of weathering steel in marine atmosphere

Corrosion Behaviors of Weathering Steels in the Actual Marine Atmospheric Zone and Immersion Zone

Corrosion Behavior of New Weathering Steel in the Environment Simulating Coastal Industrial Atmosphere

Corrosion Behavior of a Low-Carbon Steel in Simulated Marine Splash Zone

Evolution of Corrosion Products of Carbon Steels and Galvanized Steel in Simulated Marine Atmosphere

Effects of Different Fouling Organisms on Corrosion Behavior of Carbon Steel in Dalian Seawater

Corrosion evolution and stress corrosion cracking behavior of a low carbon bainite steel in the marine environments: Effect of the marine zones

Atmospheric Corrosion Behavior of Low-Alloy Steels in a Tropical Marine Environment

The Effect of Β-Feooh on the Corrosion Behavior of Low Carbon Steel Exposed in Tropic Marine Environment

The Atmospheric Corrosion Kinetics of Low Carbon Steel in a Tropical Marine Environment

Research on the Evolution of Corrosion Products of 17-4 PH Martensitic Stainless Steel in the Tropical Marine Environment

Corrosion Behavior and Kinetics of Early Stages of Low Alloy Steel under H2S/CO2 Environment

Corrosion Behavior of Carbon Steel with Pearlite-Ferrite Microstructure in Water-Saturated Supercritical H2S/CO2 Environment

Corrosion of Carbon Steel Influenced by Anaerobic Biofilm in Natural Seawater

Corrosion Behaviors and Mechanisms of New Weathering Steel and Carbon Steel in Simulated Industrial Atmosphere

Corrosion Micro- and Macro-Electrochemical Behavior of Rusted Carbon Steel and Weathering Steel

Influence of Chromium on Corrosion Behavior of Low-Alloy Steel in Cargo Oil Tank O2-CO2-SO2-H2S Wet Gas Environment