Abstract:The thermite reaction between Al and CuO is well known and highly exothermic. For a conventional thermite mixture, the reaction is rate limited by a slow heterogeneous mass transfer at the metal and oxide interface. The relatively low reaction rate and ignition difficulty have restricted practical applications for this reaction. For newly developed nanocomposed thermites, the interface area is substantially increased resulting in a much higher reaction rate and a new range of possible applications. A top-down approach to preparation of reactive nanocomposite materials in the Al-rich Al-CuO system is discussed in this paper. The materials are prepared using arrested reactive milling, a technique based on high-energy ball milling performed at room temperature and stopped (or arrested) before the exothermic reaction between Al and CuO is triggered mechanically. The products are micron-sized, fully dense powders in which reactive components are uniformly mixed on the nanoscale. Optimized milling conditions for the powders with bulk compositions xAl + 3CuO with x = 8, 10, and 12 are found. Respective powders are produced and characterized. Particle sizes are measured and the sizes of nano-inclusions of CuO in Al matrix are determined. Reactions occurring in the nanocomposite materials are also characterized by thermal analysis. Ignition of the produced powders is studied by coating them onto an electrically heated filament. Constant volume explosion experiments are used to characterize combustion performance of the produced powders. Compositions of the produced powders and products of their combustion are studied by X-ray powder diffraction. Correlations between combustion performance and material characteristics are established. Ignition for Al-rich Al-CuO nanocomposite powders was observed to occur at 850±10 K independently of the heating rate.

Fabrication of High Electrostatic Safety Metastable Al/CuO Nanocomposites Doped with Nitro-Functionalized Graphene with Fast Initiation Ability and Tunable Reaction Performance

A Favorable Improvement in Reactivity Between N-Al and Sheet-like Porous CuO As a Nanoenergetic Composite by Graphene Oxide Additives

Preparation of Activated Carbon Nanostructured Al@CuO with Low Static Sensitivity and High Reactivity

Iron Oxide/Aluminum/Graphene Energetic Nanocomposites Synthesized by Atomic Layer Deposition: Enhanced Energy Release and Reduced Electrostatic Ignition Hazard

From nanoparticles to on-chip 3D nanothermite: electrospray deposition of reactive Al/CuO@NC onto semiconductor bridge and its application for rapid ignition.

From nanoparticles to on-chip 3D nanothermite: electrospray deposition of reactive Al/CuO@NC onto semiconductor bridge and its application for rapid ignition

Electrophoretic Deposition and Characterization of Highly Exothermic Al/CuO Nanothermites

The Role of Graphene Oxide in the Exothermic Mechanism of Al/CuO Nanocomposites

Facile Formation of Nitrocellulose-Coated Al/Bi2O3 Nanothermites with Excellent Energy Output and Improved Electrostatic Discharge Safety

Unraveling the Effect of MgAl/CuO Nanothermite on the Characteristics and Thermo-Catalytic Decomposition of Nanoenergetic Formulation Based on Nanostructured Nitrocellulose and Hydrazinium Nitro-Triazolone

Ultra-fast Self-Assembly and Stabilization of Reactive Nanoparticles in Reduced Graphene Oxide Films

Controlling the Energy Release Behavior of Aluminum Nanoparticles As Metal Fuels by Atomic Layer Deposited Copper Oxide Nanocoatings

Fully Dense, Aluminum-Rich Al-Cuo Nanocomposite Powders for Energetic Formulations

Enhancing the Combustion Performance of Metastable Al@AP/PVDF Nanocomposites by Doping with Graphene Oxide

Metastable Energetic Nanocomposites of MOF-activated Aluminum Featured with Multi-Level Energy Releases

Novel Graphite-Carbon Encased Tungsten Carbide Nanocomposites by Solid-State Reaction and Their ORR Electrocatalytic Performance in Alkaline Medium

Ignition and combustion properties of NGO coated AlH 3

Synthesis, characterization and nanoenergetic utilizations of fluorine, oxygen co-functionalized graphene by one-step XeF2 exposure

Probing the Reaction Mechanism of Al/CuO Nanocomposites Doped with Ammonium Perchlorate.

Catalytic Decomposition and Crack Resistance of Composite Energetic Material Synthesized by Recrystallizing with Graphene Oxide

Reactivity adjustment from the contact extent between CuO and Al phases in nanothermites