Abstract:The earthquake-induced applicability of key components of the existing high-speed railway CRTS II ballastless track-continuous girder bridge system (HSRCCB) is not clear. The fine simulation model of the HSRCCB is developed herein. Latin hypercube sampling is used to consider the uncertainty of ground motion and HSRCCB modeling parameters. Earthquake-induced residual deformation sample database for key components of the HSRCCB under near-field rare earthquakes is constructed. Furthermore, overlimit state analysis and applicability evaluation of bridge key components are performed using the statistical inference method. The characteristic curve of earthquake-induced residual deformation for track key components is developed using the hypothesis testing principle and statistical inference method, and the overlimit state analysis and applicability evaluation are carried out accordingly. The results show that after the near-field rare earthquake, the bearing undergoes large transverse residual deformation, as well as a longitudinal residual deformation. The box girder has an obvious transverse offset; However, the transverse and longitudinal residual deformation of track key components is smaller than that of the bearing. The maximum overlimit rate of residual deformation of fixed bearing and sliding bearing is 98%, indicating that most of the bearing gets destroyed during the process. Earthquake-induced bending and shear failure do not commonly occur at the abutment/pier bottom. The longitudinal residual deformation overlimit rate of the sliding layer and friction plate is relatively large, reaching more than 82% and 47%, respectively. Shear slots, shear steel bars, and fasteners are not easy to overrun. The overlimit rate of transverse residual deformation of lateral blocks is low, CA mortar and fasteners residual deformation overlimit rate tends to be 0. The bearing is no longer applicable. The shear force and bending moment at the abutment/pier bottom, shear slots, shear steel bars, CA mortar, and fasteners applicability all meet the requirements, while the sliding layer, friction plate, and lateral blocks are difficult to meet the applicability requirements. Among them, the applicability index value of the longitudinal residual deformation of the sliding layer is as high as 181.94, indicating that the sliding layer is far from meeting the seismic design requirements of near-field rare earthquakes. Thus, attention should be paid to the seismic design.

Effects of CRTS II Slab Ballastless Track on the Seismic Responses of a High-Speed Railway Continuous Girder Bridge

Effect of Rail Restraints on Seismic Responses of Cushioning Railway Bridges

Study on the Seismic Performance of High-Speed Railway Extradosed Cable-Stayed Bridge Considering CRTS III Slab Ballastless Track Structure

Seismic response of CRTS II ballastless track-bridge system considering the damage of track structure

Seismic applicability analysis of high-speed railway multi-span simply-supported bridges based on simplified model

Running test on high-speed railway track-simply supported girder bridge systems under seismic action

Study of the track constraint effect on the seismic risk in longitudinal direction of high-speed railway multi-span simply-supported beam bridge

Effects of track structure on seismic responses of medium-speed maglev vehicle-bridge system

Simplified linear analysis model of longitudinal constraint effect of high-speed railway simply-supported bridge under frequent earthquake

Refined dynamic analysis of three slab tracks on bridge structures under various high-speed train loads

Applicability of existing CRTS II ballastless track – Continuous girder bridge system under near-field transverse rare earthquake

The influence of trains on the seismic response of simply-supported beam bridges with different pier heights expressed through an impact factor

Study on the influence of damage characteristics of longitudinal ballastless track on the dynamic performance of train-track-bridge coupled systems

Force Analysis of CRTS II Slab Track on Long Span Bridge under Damage Conditions

Running safety and seismic optimization of a fault-crossing simply-supported girder bridge for high-speed railways based on a train-track-bridge coupling system

A Theoretical Investigation on Influences of Slab Tracks on Vertical Dynamic Responses of Railway Viaducts

Creep Effect on the Dynamic Response of Train-Track-Continuous Bridge System

Experimental Study on Seismic Performance of CRTS II Slab-Type Ballastless Track Lateral Block of HSRs

Influence of interface crack on dynamic characteristics of CRTS III slab ballastless track on bridge

Interaction Analysis of Continuous Slab Track (CST) on Long-Span Continuous High-Speed Rail Bridges

Effects of friction-based fixed bearings on the seismic vulnerability of a high-speed railway continuous bridge