Abstract:Both the nacre-like bionic microstructure and the spiral laminated bionic configuration exhibit superior damage-tolerance characteristics. On the basis of this observation, the design concept of the bionic helical-interlayer configuration is innovatively integrated into the design of a bionic nacre-like honeycomb structure. By systematically studying different spiral angles of honeycomb's interlayer stacking forms, their influence on the structural performance is deeply discussed with four-point bending tests. Mechanical samples are carefully prepared using short carbon fiber reinforced polyamide composites (i.e., PA6-CF) through conventional fused filament fabrication (FFF) 3D printing technology, where the accuracy and reliability of the designed bio-inspired samples are ensured. The experimental results reveal significant improvements in bending strength and elastic modulus across various bionic nacre-like honeycomb spiral structures compared to uniformly overlap configurations. In particular, the SH-7.5 sample shows a remarkable 35.47% increase in bending strength and a 65.10% increase in elastic modulus over the SH-11.25 sample. SEM-based microstructural analyses are carried out to further explore the fracture mode of the carbon fibers, implied the helical configuration adopted in the nacre-like honeycomb structure enhances the flexural resistant ability of the PA6-CF composites. The findings above bear important guiding significance and reference value for the design of lightweight and high damage-tolerance composite structures.Highlights A novel bio-inspired structure is implemented to improve the mechanical performance of fused filament fabricated polyamide composites, where the bionic spiral helical configuration is integrated into high-fracture-resistance nacre-like honeycomb structures. Mechanical testing results indicate that a helix angle under 10 degrees results in a significant improvement in the structural performance of flexural strength. Microstructural analysis reveals that the helical configuration enhances the load-bearing functionality of reinforcing carbon fibers in the printed polyamide composites. FFF 3D printing enables further implementation of the proposed bio-inspired novel structure for lightweight and damage-tolerant composite applications with high customization demands.

Bioinspired Design of Lightweight Laminated Structural Materials and the Intralayer/interlayer Strengthening and Toughening Mechanisms Induced by the Helical Structure

Improved Strength and Toughness of Bioinspired Bouligand Architecture Composite by Discontinuous Carbon Fiber

Multiscale Structural Design and Fracture Control of High-Performance Biomimetic Materials

Bending Resistance and Anisotropy of Basalt Fibers Laminate Composite with Bionic Helical Structure

Mechanical performance and optimization strategies of mantis shrimp rod inspired beam structural composites

Hierarchical structure design of Strombus gigas shell inspired laminated artificial composites and the mechanical performance optimization strategy

Design and Mechanical Properties of Short Carbon Fiber Reinforced Biomimetic Materials

Improving Flexural Performances of Fused Filament Fabricated Short Carbon Fiber Reinforced Polyamide Composites with Natural‐inspired Structural Design

Bioinspired Microstructure Design Simultaneously Enhances Strain-Rate Stiffening and Toughening of Composites

Modulation of Impact Energy Dissipation in Biomimetic Helicoidal Composites

Understanding the helicoidal damage behavior of bio-inspired laminates by conducting multiscale concurrent simulation and experimental analysis

A New Biomimetic Composite Structure With Tunable Stiffness And Superior Toughness Via Designed Structure Breakage

Biomimetic Laminated Fiber-Reinforced Composites with a Co-Enhancement of Strength and Toughness

Improved Mechanical Performance of Strombus Gigas Shell Inspired Artificial Composites by Regulating the Laminated Structure and Interface Bonding

Bio-inspired hybrid helicoidal microstructure: Balancing carrying capacity and prolonged residual load

Study on Quasi-Static Tensile Mechanical Properties of Biomimetic Helicoidal Composite Laminates

Hierarchical Toughening of Bioinspired Nacre-Like Hybrid Carbon Composite

Crack modes and toughening strategies of bioinspired 3D printed double-helicoidal architectures

Compressive failure modes and parameter optimization of the trabecular structure of biomimetic fully integrated honeycomb plates.

Crack modes and toughening mechanism of a bioinspired helicoidal recursive composite with nonlinear recursive rotation angle-based layups

A Feather-Inspired Interleaf for Enhanced Interlaminar Fracture Toughness of Carbon Fiber Reinforced Polymer Composites