Co3O4 Nanowire Arrays Grown on Carbon Nanotube-Based Films for Fischer–Tropsch Synthesis

Xixi Xing,Sufang Chen,Cun-wen Wang,Renliang Lyu,Daohong Zhang,Yuhua Zhang,Chengchao Liu,Jinlin Li,Jingping Hong
DOI: https://doi.org/10.1021/acsanm.1c01122
IF: 6.14
2021-01-01
ACS Applied Nano Materials
Abstract:Agglomeration is generally considered as one of the main reasons for catalytic deactivation, and the use of metallic-structured supported catalysts is considered as a potential way to solve the problem. In this study, Co3O4 nanowire array catalysts with different morphologies were innovatively synthesized on a carbon nanotube film (CF) substrate by a hydrothermal self-assembly method, and the processes are rather simple and fast. Also, the Fischer-Tropsch synthesis (FTS) performance of Co/CF-H (grain-like array) and Co/CF(A)-H (smooth rod-like array) catalysts was investigated in a fixed bed reactor. The robust metal-support interface between the carbon nanotube and cobalt species allows stabilization of Co3O4 against sintering. Extremely high cobalt loadings (>70%) were achieved on both catalysts with a nanoarray structure (Co/CF-H and Co/CF(A)-H). The catalytic results showed that the nanowire array catalysts exhibited 2.4-6 times higher cobalt time yield and good stability in comparison with those of the impregnated counterpart. The appropriate size and porous structure of Co3O4 nanowires in Co/CFH resulted in a more accessible surface and much higher FTS activity than Co/CF(A)-H. Moreover, the ordered structure of the Co3O4 nanoarray in both monolith catalysts maintained their original morphologies after catalytic tests. Also, the thermal stabilities of these two catalysts in a H-2-containing atmosphere were studied, and the structure of grain-like arrays on Co/CF-H was disassembled, while rod-like arrays on Co/CF(A)-H were still well retained up to 800 degrees C, with small cobalt particles migrating on the rod surface, indicating its excellent thermal stability.
What problem does this paper attempt to address?