Abstract:There are many sand-laden waters in China, and the wear of hydraulic structures caused by sand-laden water diversion has been paid more and more attention. Taking the spillway of a reservoir as the research object, the numerical model of erosion wear caused by sediment-laden particle flows on the spillway was established by using the computational fluid dynamics (CFD) method, VOF (Volume of Fluid) multiphase flow model and DPM (Discrete Phase Model). Through the simulation analysis of the spillway’s overall erosion, the distribution of the spillway erosion wear was obtained. Then, according to the main wear parts, the single variable, such as sediment diameter, sediment concentration, flow velocity and gate opening degree, was changed to study the erosion amount of the spillway and the distribution law of the spillway erosion parts. The results show that the main erosion sites of the spillway are at the bottom of the gate chamber and the middle section of the spillway. The maximum erosion increases linearly with the increase in sediment concentration. With the increase in sediment concentration, the sediment concentration changed from 1 kg/m3 to 6 kg/m3, and the maximum erosion of the spillway increased from 2.58 × 10−7 kg/m2 to 1.53 × 10−6 kg/m2. The erosion at the bottom of the spillway and gate leaf increases first and then decreases with the increase in sediment diameter and reaches the maximum value when the particle size is 0.002 mm. The erosion at the bottom of the spillway and the gate leaf increases with different growth trends as the flow velocity increases, when the flow velocity increases from 2 m/s to 9 m/s and the maximum erosion amount at the bottom of the spillway increases from 3.66 × 10−7 kg/m2 to 1.14 × 10−6 kg/m2, and the maximum erosion of the gate leaf increased from 1.66 × 10−8 kg/m2 to 8.98 × 10−6 kg/m2. The erosion amount at the bottom of the spillway increases with the increase in the gate opening between 0 and 3 m and tends to be stable when the gate opening is greater than 3 m. The maximum erosion position moves to the rear part of the spillway with the change in the gate opening. The change in the gate opening has no obvious effect on the erosion amount of the gate leaf but only changes the area of the gate erosion part. Thus, the erosion wear distribution of spillway under different work conditions is summarized, and the qualitative study between the erosion wear and the distribution of sediment diameter, sediment concentration, flow velocity and gate opening degree is made.

Fully Drawdown Experimental Investigation On Sediment Erosion Through An Orifice

Experimental Study on Submerged Sand Erosion through a Slot on a Defective Pipe

Physical modeling on sand erosion around defective sewer pipes under the influence of groundwater

Experimental Observations on the Initiation of Sand-Bed Erosion by an Upward Water Jet

Numerical Investigation of Sand-Bed Erosion by an Upward Water Jet

A Coupled Discrete Element Model for the Simulation of Soil and Water Flow Through an Orifice

Experimental Study on Sand Dike Breaching by Wave Overtopping

Experimental Study of External Pipe Wall Erosion Due to Water Pipe Leakage

FOULING ANALYSIS ON ENERGY DISSIPATION ORIFICE PLATES WITH SEDIMENT CONTAINED WATER FLOW

Numerical Study of Solid Particle Erosion in a Cavity with Different Wall Heights

Experimental investigation of internal erosion behaviours in inclined seepage flow

Experimental study of sediment erosion in Francis runner using a non-recirculating test rig

Three-dimensional numerical investigation of solid particle erosion in gate valves

Numerical Investigation of Erosion Wear Characteristics of Hydraulic Spillway

Experimental Study on the Soil Erosion through a Defective Pipe under the Cyclic Infiltration-Exfiltration Flow

Internal Erosion Experiments on Sandy Gravel Alluvium in an Embankment Dam Foundation Emphasizing Horizontal Seepage and High Surcharge Pressure

Numerical Simulation and Experimental Study on Sediment Wear of Fixed Guide Vanes of Hydraulic Turbines in Muddy River Based on Discrete Phase Model

Experimental Erosion Flow Pattern Study of Pelton Runner Buckets Using a Non-Recirculating Test Rig

Erosion Characteristics of Hydraulic Turbine Guide-Vane End Clearance in Sediment Water Flow: A Simplified Model Analysis

Numerical Modeling on Fluid-Solid Coupled Erosion in Sandy Gravel Soils Containing a Suspended Cut-Off Wall

An experimental investigation on slope stability under drawdown conditions using transparent soils