Abstract:Hexavalent chromium Cr (VI) is a toxic material used in many industries such as tanneries and electroplating industries. Most of the previous researches studied the removal of chromium at lower concentrations up to 600 mg/L but did not tackle the behavior at higher concentrations, which resemble the real concentration of studied tanneries effluents. The present research is a comparative study of different agricultural low cost adsorbents in the removal of high Chromium concentration from industrial wastewater up to 1000 mg/L, compared to a commercial activated carbon. The tested adsorbents are (Banana Waste (BW), Sawdust (SD), Phragmites Australis (PA), Sugarcane Bagasse (SCB), Pea pod peels (PPP) and Rice straw (RS)). The materials were chemically pretreated with acid-alkali except BW was treated with acid only, to improve adsorbent metal binding capacity. Batch experiments were conducted to study the effect of pH, adsorbent dosage, contact time, initial Chromium concentration and temperature on the removal efficiency of Chromium from wastewater. The experiments were conducted in two sets, one for lower concentration (25-50-100-200-400) mg/L and the other for higher concentration (600-800-1000) to simulate the concentration of Chromium in tannery industry effluents. At 1000 mg/L initial concentration, BW achieved the optimum removal efficiency of 73.28% at pH = 3, adsorbent dosage = 25 g/L and contact time of 3 hours with the adsorption capacity was 39 mg/g. For SD at pH=2, 3 hours contact time, 10 g/L dosage, and 30oC the removal ratio was 64.83% and the adsorption capacity was 86.30 mg/g. The equilibrium data for various agricultural adsorbents was being tested with various adsorption isotherm models such as Langmuir, Freundlich and Tempkin. At low concentrations, AC, BW, PA and SCB follows Freundlich isotherm model while SD follows Langmuir isotherm model. At higher concentrations, BW, SD, PA follows Langmuir isotherm while SCB follows Tempkin isotherm model. To evaluate the mechanism of Cr adsorption on different adsorbents, Pseudo-first-order and Pseudo-second-order equations were used. The adsorption process follows Pseudo-second-order for all adsorbents, which confirms the chemisorption of Cr (VI) on different adsorbents.

Adsorption Of Cr (Iii) By Sodium-Alginate In Aqueous Solution

Leaf char: An alternative adsorbent for Cr(III)

Synthesis, characterization, and adsorption capacity of sodium alginate poly grafted (fumaric acid-co-polyacrylic acid)/graphene oxide hydrogel as adsorbent for Cr (VI) and Pb (II) removal

Removal of Cr(VI) by ammonia-modified biomass adsorbent

Effective Removal of Cr (VI) from Aqueous Solution by Reinforced Sodium Alginate/polyethyleneimine/graphene Oxide Composite Aerogels.

Efficient heavy metal removal from water by alginate-based porous nanocomposite hydrogels: The enhanced removal mechanism and influencing factor insight

Removal of Cr(VI) from Aqueous Solutions by Low-Cost Biosorbents: Marine Macroalgae and Agricultural By-Products

Enhanced removal of Cr(VI) from water using alginate-modified algal biochar: a promising adsorbent

Amine-functionalized cellulose nanofiber-sodium alginate-Fe(III) porous hollow beads for the efficient removal of Cr(VI)

Adsorption of High Chromium Concentrations from Industrial Wastewater Using Different Agricultural Residuals

Selective adsorption and separation of Cr(VI) by surface-imprinted microsphere based on thiosemicarbazide-functionalized sodium alginate

Fabrication of Sodium Alginate Porous Scaffolds for Heavy Metal Ion Removal from Aqueous Solution

Preparation of PVA/SA-FMB Microspheres and Their Adsorption of Cr(VI) in Aqueous Solution

Effective adsorptive uptake of hexavalent chromium ions from aqueous systems utilizing a superior activated nanobentonite@cobalt ferrite@carboxymethylcellulose nanocomposite

Surface Modified Leaves with High Efficiency for the Removal of Aqueous Cr (VI)

Kinetic And Equilibrium Studies Of Chromium (Vi) Biosorption By Spent Macroalgae Polysiphonia Urceolata And Chondrus Ocellatus

Exploring the Efficiency of Algerian Kaolinite Clay in the Adsorption of Cr(III) from Aqueous Solutions: Experimental and Computational Insights

High Adsorption of Hazardous Cr(VI) from Water Using a Biofilter Composed of Native Pseudomonas koreensis on Alginate Beads

Design of ion-imprinted amino-modified chitosan for selective chromium (III) ion removal

Adsorptive removal of Cr(VI) from aqueous solution: kinetic, isotherm, thermodynamics, toxicity, scale-up design, and GA modeling

Methodical study of chromium (VI) ion adsorption from aqueous solution using low-cost agro-waste material: isotherm, kinetic, and thermodynamic studies