Abstract:After being launched into space to perform some tasks, the inertia parameters of a space robotic system may change due to fuel consumption, hardware reconfiguration, target capturing, and so on. For precision control and simulation, it is required to identify these parameters on orbit. This paper proposes an effective method for identifying the complete inertia parameters (including the mass, inertia tensor and center of mass position) of a space robotic system. The key to the method is to identify two types of simple dynamics systems: equivalent single-body and two-body systems. For the former, all of the joints are locked into a designed configuration and the thrusters are used for orbital maneuvering. The object function for optimization is defined in terms of acceleration and velocity of the equivalent single body. For the latter, only one joint is unlocked and driven to move along a planned (exiting) trajectory in free-floating mode. The object function is defined based on the linear and angular momentum equations. Then, the parameter identification problems are transformed into non-linear optimization problems. The Particle Swarm Optimization (PSO) algorithm is applied to determine the optimal parameters, i.e. the complete dynamic parameters of the two equivalent systems. By sequentially unlocking the 1st to nth joints (or unlocking the nth to 1st joints), the mass properties of body 0 to n (or n to 0) are completely identified. For the proposed method, only simple dynamics equations are needed for identification. The excitation motion (orbit maneuvering and joint motion) is also easily realized. Moreover, the method does not require prior knowledge of the mass properties of any body. It is general and practical for identifying a space robotic system on-orbit.

Equivalence Analysis Of Mass And Inertia For Simulated Space Manipulator Based On Constant Mass

Analysis and Evaluation on Unloading Ratio of Zero-g Simulation System Based on Torques of Space Manipulator

Study on the Joint-Space Coupling Characteristics of a Generalized Load Simulator

Parameter identification of additional forces and torques for simulated space manipulator in zero-g simulation system

Understanding the True Dynamics of Space Manipulators from Air-Bearing Based Ground Testing

Dynamically Equivalent Manipulator for Space Manipulator System. 2

Automatic Mass Balancing of a Spacecraft Three-Axis Simulator: Analysis and Experimentation

Six-DOF Spacecraft Dynamics Simulator For Testing Translation and Attitude Control

Estimation of Vibration Characteristics of a Space Manipulator From Air Bearing Supported Test Data

On-orbit identifying the inertia parameters of space robotic systems using simple equivalent dynamics

A Light Space Manipulator with High Load-to-Weight Ratio: System Development and Compliance Control

Dynamic Performance Comparison and Counterweight Optimization of Two 3-DOF Parallel Manipulators for a New Hybrid Machine Tool

Development of a High-Accuracy Inertia Simulation System for Drive Joints of Space Station Transfer Arm

Mapping a Space Manipulator to a Dynamically Equivalent Manipulator

Mass properties identification and automatic mass balancing system for satellite attitude dynamics simulator

Formulating an Invariant Manipulability Index of Gough-Stewart Platform

Development and Experiment of Semi-Physical Simulation Platform for Space Manipulator

The Analysis and Compensation of Elastic Unbalance Torque of the Three-axis Air-bearing Simulator

Dynamically Equivalent Manipulator for Space Manipulator System .1.

The Kinematics and Statics of Manipulators

Joint Dynamic Analysis of Space Manipulator with Planetary Gear Train Transmission