Abstract:With the growing requirements for the renewability and sustainability of electronic products, environmentally friendly cellulose-based materials have attracted immense research interests and gained increasing prominence for electronic devices. Humidity sensors play an essential role in industries, agriculture, climatology, medical services, and daily life. Here, for the first time, we fabricate capacitive humidity sensors based on ionic conductive wood-derived cellulose nanopapers (WCNs). The WCN-based humidity sensors exhibited ultrahigh sensitivity, fast response, small hysteresis, and more importantly, a wide working range of relative humidity (RH). The sensors showed >10<sup>4</sup> times increase in the sensing signal over the 7–94% RH range at 20 Hz, while many reported humidity sensors with high sensitivity often have the working range limited to high RH levels. Our sensors can realize the distinction of nuances in humidity and exhibit outstanding noncontact skin humidity sensing properties. Flexible WCN-based humidity sensors were also fabricated, and they displayed excellent sensing properties with long-time stability, endowing them with multifunctional applications. The contrast humidity sensing experiment compared to the existing commercial humidity sensor further demonstrated the higher and faster response of our WCN-based sensors. Thus, this work provides effective guidance for the design of high-performance humidity sensors using nanopapers and opens a new dimension for a variety of future applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12868?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12868</a>.Humidity sensing properties of capacitive sensors based on different materials and based on paper; FTIR spectrum of 40 μm thick WCNs; EDX spectrum of 40 μm thick WCNs; weight percent and atomic percent of each element in WCNs; XPS spectra of pristine paper and WCNs; three response/recovery cycles of WCNs (1.0 μm thick film) by switching between 7% RH air and 60% RH air; thickness graphs of three WCN films of 6 μL, 12 μL, and 18 μL of WCN solution measured by AFM; and EIS curves of a WCN-based sensor with a 2.5 μm thick film under different 36, 47, and 61, 75, and 83% RH conditions from 20 Hz to 100 kHz (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12868/suppl_file/am0c12868_si_001.pdf">PDF</a>)Movie of the water-spraying test for a commercial hygrometer (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12868/suppl_file/am0c12868_si_002.mp4">MP4</a>)Noncontact skin humidity sensing performance by putting the moist hand and dry hand, respectively, without gloves at a fixed distance of 2 cm from the sensors (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12868/suppl_file/am0c12868_si_003.pdf">PDF</a>)This article has not yet been cited by other publications.

Green and sustainable cellulose-derived humidity sensors: A review

Recent progress and applications of cellulose and its derivatives-based humidity sensors: A review

Flexible Humidity Sensors with High Water-Resistance Based on a Composite of Sodium Carboxymethyl Cellulose, Graphene Oxide and 3-Glycidyloxypropyl Trimethoxysilane

Modulation and Mechanisms of Cellulose‐Based Hydrogels for Flexible Sensors

Recent advances in cellulose-based membranes for their sensing applications

Humidity sensitive cellulose composite aerogels with enhanced mechanical performance

Cellulose-Based Intelligent Responsive Materials: A Review

Ingestible, Biofriendly, and Flexible Flour-Based Humidity Sensors with a Wide Sensing Range

Flexible Capacitive Humidity Sensors Based on Ionic Conductive Wood-Derived Cellulose Nanopapers

Asymmetrically Patterned Cellulose Nanofibers/Graphene Oxide Composite Film for Humidity Sensing and Moist-Induced Electricity Generation

Cellulose-Based Conductive Materials for Energy and Sensing Applications

Ultrasensitive Physical, Bio, and Chemical Sensors Derived from 1-, 2-, and 3-D Nanocellulosic Materials

Nanocellulose as a promising substrate for advanced sensors and their applications

Current International Research into Cellulose As a Functional Nanomaterial for Advanced Applications

Flexible and Highly Sensitive Humidity Sensor Based on Cellulose Nanofibers and Carbon Nanotube Composite Film.

Ultrasensitive Physical, Bio, and Chemical Sensors Derived from 1-, 2-, and 3-D Nanocellulosic Materials.

Cellulose Nanofiber/Carbon Nanotube Dual Networks Enabled Humidity Sensor with High Sensitivity and Durability.

An overview of the development status and applications of cellulose-based functional materials

Enhanced homogeneity and flexibility in a humidity sensor using cellulose nanocrystal-based composite film with circular shear flow

A Cellulose Nanofiber Capacitive Humidity Sensor with High Sensitivity and Fast Recovery Characteristics

Hydrophilic modification of cellulose using sulfamic acid for optical fiber humidity sensor fabrication