Abstract:In order to verify the feasibility of three-dimensional (3D) printing technology in preparing the metamaterial absorbers with complex structure, a three-layer broadband absorbing metamaterial is designed and fabricated by 3D printing technology. The surface layer and middle layer of the metamaterial are composed of periodic arrays with different unit dimensions and the bottom layer of a slab structure. The optimized thickness of the metamaterial is 4.7 mm. A composite absorbent which consists of carbonyl iron powder and nylon is used to fabricate the absorber. In experiment, the obtained absorber is vertically irradiated by an electromagnetic (EM) wave. Two strong absorption peaks at 5.3 GHz and 14.1 GHz are achieved, with the reflection losses of -15.1 dB and -12.5 dB, respectively. The superposition of the two absorption peaks results in a reflection loss below -10 dB in a range from 4 to 18 GHz. The effective EM parameters of the surface layer and the middle layer are calculated by the S parameter inversion method. An effective model of the three-layer structure absorber is proposed and its reflectivity is calculated by using a multilayer structure reflectivity formula. The calculated reflectivity agrees well with the measured one. The absorbing and resonance mechanisms of the two absorption peaks are investigated by analyzing the dynamic distributions of power density loss, electric field and magnetic field. It can be clearly confirmed that the reflection losses at 5.3 GHz and 14.1 GHz are primarily concentrated on the bottom layer and surface layer, and the broadband absorption performance can be derived from the superposition of broadband absorptions of the three absorbing layers. Meanwhile, the strong electric coupling effect between the adjacent units in the surface layer is demonstrated by analyzing the electric-field distributions, which indicates that the strong reflection loss at 14.1 GHz is mainly caused by the electric response. The multiple scattering effects among the three layers are also considered according to the magnetic field distributions at two resonance frequencies. It is shown that there are two magnetic responses at 5.3 GHz and 14.1 GHz, respectively, and the multiple scattering contributes to increasing the EM wave propagation distance and enhancing the power loss. The designed absorbing metamaterials in this paper achieve good broadband absorption performances, particularly in the low frequency band. Combined with 3D printing rapid technology, a promising route to constructing 3D absorbing metamaterials with complex structures is proposed, which would be of great significance and broad practical prospect.

A wide-angle broadband electromagnetic absorbing metastructure using 3D printing technology

Ultrabroadband metastructure absorber with angular stability for conformal applications

Wide-angle Microwave Absorption Properties of Multilayer Metamaterial Fabricated by 3D Printing

3D Printed Labyrinth Multiresonant Composite Metastructure for Broadband and Strong Microwave Absorption

Electromagnetic Characteristics and 3D-Printing Realization of a Lightweight Hierarchical Wave-Absorbing Metastructure for Low-Frequency Broadband Absorption

Structural Broadband Absorbing Metamaterial Based on Three-Dimensional Printing Technology

Functional Additive Manufacturing of Large-size Metastructure with Efficient Electromagnetic Absorption and Mechanical Adaptation

Bamboo-inspired Composite Metastructure for Broadband Microwave Absorption and Load Bearing

A 3D-Printed Lightweight Broadband Electromagnetic Absorbing Metastructure with Preserved High-Temperature Mechanical Property

Multi‐physical honeycomb metastructure fabricated by fused deposition modeling with broadband radar absorption and mechanical resistance for drones

Electromagnetic Wave Absorption and Compressive Behavior of a Three-Dimensional Metamaterial Absorber Based on 3D Printed Honeycomb.

Design and manufacturing of lightweight modular broadband microwave absorbing metastructure

Design-manufacturing-evaluation integration of microwave absorbing metastructures based on additive manufacturing

Material–structure Integrated Design for Ultra-Broadband All-Dielectric Metamaterial Absorber

Lightweight Metastructure with Broadband Microwave Absorption and Effective Mechanical Resistance Using 3D Printing Technology

Flexible Design of Gradient Multilayer Nanofilms Coated on Carbon Nanofibers by Atomic Layer Deposition for Enhanced Microwave Absorption Performance

Metastructure based broadband structural stealth with material-structure-function integration

A High-performance Metamaterials Absorbing Structures Based on Fused Deposition Modeling

Multifunctional Carbon Fiber Reinforced Multilayered Metastructure with Broadband Microwave Absorption and Effective Mechanical Resistance

Integrated lightweight gradient honeycomb metastructure with microwave absorption and mechanical properties: analysis, design, and verification

Eco-friendly microwave absorption metastructure: Design, optimization, and performance of CPVM based on PLA@CF