Abstract:The Leighton dish formerly at the Caltech Submillimeter Observatory will be reassembled to become the Leighton Chajnantor Telescope (LCT). It will be required to demonstrate high surface accuracy and controlled radiation patterns at high frequency, which are largely limited by surface error due to panel misalignment on the primary reflector. Not only the surface rms error but also the error distribution has effect on the radiation pattern of the antenna. Therefore, analyzing the effect of error distributions resulting from various panel misalignments on the radiation pattern of the antenna will facilitate better compensation of surface errors during the reassembly process. To acquire the radiation pattern of LCT's antenna with panel misalignments, we first propose a simulation method based on physical optics and the physical theory of diffraction, which offers precise results but is time-consuming, especially at high frequencies. Then, we propose a rapid computation method that combines the method of calculating the optical path difference (OPD), the OPD fitting method, and the aperture integration method for segmented reflectors. Experimental results demonstrate that the rapid computation method is highly efficient and accurate compared to the simulation method. In order to show the effect of error distributions due to two typical panel misalignments (i.e., piston and tip-tilt) on radiation patterns, experiments are conducted using the two proposed methods for various error distributions. These experiments indicate that for the same surface rms error, smaller panel errors at smaller normalized aperture radii are more conducive to achieving improved characteristics of the radiation patterns, such as reduced peak gain losses and lower sidelobe levels. Additionally, comparison experiments also reveal that variations in piston error have a greater impact on the radiation patterns than variations in tip-tilt error under the same surface rms error.

Impact On The Performance Of Compact Antenna Test Range Due To Surface Deviation Of The Reflector

Structure design and mechanical measurement of inflatable antenna

Adjustment on the Received Optical Power of a Ground-Based Optical Instrument by a Corner Cube Retroreflector with a Curved Front-Face.

An Accurate Analytical Method to Determine the Range of Quiet Zone in Compact Antenna Test Range

Reflector Surface Precision Experiment of Deployable Truss Antenna

Reflector design and precision measurement of inflatable antenna

Design of tri-reflector compact antenna test range

Quiet zone evaluation from nonredundant rectilinear data for tri-reflector compact antenna test range

Reflection of Transmitting Antenna in Reverberation Chamber and Its Effect on Chi-square Validation

Impact of an axial non-confocal antenna on the on-orbit lasercom receiver analyzed by the simplified combination method of ray tracing and diffraction theory

Millimeter‐wave metasurface lens aided phaseless characterization for quiet zone of compact antenna test range

Rigorous characterization of EMC antennas

On the Antenna Illumination Effects in Monostatic Reflectivity Determination for Microwave Calibration Targets

Application of Semi-optical Path Difference for Antenna Surface Accuracy Measurement in a Compact Range

Tolerance Modeling and Analysis Considering Form Defects for Spaceborne Array Antenna

Research on Transmission Performance of a Surface Acoustic Wave Sensing System Used in Manufacturing Environment Monitoring

Surface Impedance Modulation of FSS Composite Absorber for RCS Reduction at Normal and Grazing Incidence

Pattern Correction from Non-Ideal Compact Antenna Test Range Measurement

Measurement of the Quiet Zone Performance of Microwave Anechoic Chamber

Transmitting Antenna's Reflected Power and Its Influence on Reverberation Chamber Calibration

Effect of Panel Misalignment Error Distribution on the Radiation Pattern of Leighton Chajnantor Telescope's Antenna