Abstract:Two conflicting models describe the mechanism of aluminum (Al) hydrolysis and polymerization in aqueous solution, namely, the "Core-links" model and the "Cage-like" Keggin-Al-13 model. For the sake of simplicity, the expressions of Al-13 in the "Core-links" model and the "Cage-like" model are termed as C-Al-13 and K-Al-13, respectively. The two models have co-existed for almost 50 years, but describe differences in the transformation of polymeric Al speciation in aqueous solution, such as, hydrolysis, polymerization, flocculation, precipitation and crystallization. Many of the polynuclear Al species presented in the literature cannot be adequately described with either the "Core-links" model or the "Cage-like" Keggin-Al-13 model. This paper introduces new considerations for the mechanism of Al hydrolysis and polymerization in aqueous solution, a "Continuous" model representing a unification of the "Core-links" model and "Cage-like" model, based on the systematic summary and analysis of numerous published experimental results. The general viewpoints are:(1) The "Core-links" model can only describe the transient state process for speciation changes of Al in hydrolysis and polymerization. Under a moderate titration rate of Al solution using alkaline solution, the transformation of polynuclear Al species in forced hydrolyzed Al solutions has gone through the continuous speciation change process: from small polymer (linear shape) --> middle polymer (plane shape) --> large polymer (stereoscopic conformation). This is a continuous transient course and can be described by the "Core-links" model.(2) The "Cage-like" Keggin-Al-13 model may only depict the metastable (sub-steady State) speciation of polynuclear Al, which is formed through the structural re-organization (self-assembly) during the aging of transient species. Aging is the prerequisite condition for the formation of K-Al-13. After aging the transient species of polymeric Al produced in titration, the concentration of polymeric Al determined by Ferron timed-spectrometry is equal to that of Al-13 concentration measured by Al-27-NMR, namely Al-b(photometry) approximate to K-Al-13 (OH-/Al = 1.0-2.8). So that the existence of K-Al-13 is universally approved. However, the "Cage-like" K-Al-13 structural model cannot explain the whole transformation process of polynuclear Al in aqueous solution, since many polymeric Al species produced in titration processes (transient state) cannot be detected by Al-27-NMR. In addition, the slow base-neutralization and the moderate reaction atmosphere favors the polymeric Al, facilitating the formation of K-Al-13 by self-assembly.(3) The two models can be unified. They actually reflect the different stages of the Al speciation in hydrolysis and polymerization: Al3+ --> "Core-links" species (transient state) --> K-Al-13 (metastable state) --> Al(OH)(3)(s, steady state) --> Al(OH)(4)(-). There is an inevitable intrinsic connection between the interesting polymeric Al-13 species C-Al-13 and K-Al-13. This connection can be summarized as C-Al-13(9+) --> K-Al-13(7+), which is an irreversible self-assembly course.(4) The reason for the many seemingly inconsistent and even paradoxical literature reports is due to assessment at the different stages of the Al species chain in addition to differences in experimental conditions. Therefore, a combined "Continuous" model is presented to describe the linkage of "Core-links" model and "Cage-like" model. It is based on our newly introduced concept of experimental condition comprehensive parameter-"the flux of alkali neutralization phi". (C) 2004 Elsevier B.V. All rights reserved.

Studies on the Mechanism of Hydrolysis and Polymerization of Aluminum Salts in Aqueous Solution: Correlations Between the Core-links Model and Cage-like Keggin-Al13 Model

Unraveling the Structural Evolution of Aluminum Polyoxocations in Solution

27Al NMR Chemical Shifts and Relative Stabilities of Aqueous Monomeric Al3+ Hydrolytic Species with Different Coordination Structures

Effect of pH on the aluminum salts hydrolysis during coagulation process: formation and decomposition of polymeric aluminum species.

Theoretical insights into the dimerization mechanism of aluminum species at two different pH conditions

Modified ferron assay for speciation characterization of hydrolyzed AI(III): A precise k value based judgment

Advancement of Studies on the Formation of Polynuclear Hydroxyl Aluminum Species and Their Transformation Laws in Aqueous Systems and Soil Solutions: A Review

Density functional theory study and kinetic analysis of the formation mechanism of Al30O8(OH)56(H2O)2618+ (Al30) in aqueous solution

Deprotonation and aggregation of Al13 under alkaline titration: A simulating study related to coagulation process

Characterization of Flocs Generated by Preformed and in Situ Formed Al13 Polymer

An Effective Method for Improving Electrocoagulation Process: Optimization of Al 13 Polymer Formation

Resolving intermediates during the growth of aluminum deuteroxide (Hydroxide) polymorphs in high chemical potential solutions

Inference of principal species in caustic aluminate solutions through solid-state spectroscopic characterization

[Coagulation Behavior of Al13 Species].

Chemical characteristics of aluminum aqueous solution and the formation mechanism of aluminum polymer

DFT Studies on the Water-Assisted Synergistic Proton Dissociation Mechanism for the Spontaneous Hydrolysis Reaction of Al3+ in Aqueous Solution

Effect of Aluminum Speciation and Structure Characterization on Preferential Removal of Disinfection Byproduct Precursors by Aluminum Hydroxide Coagulation.

Ligand-field regulated superalkali behavior of the aluminum-based clusters with distinct shell occupancy

Coagulation Behaviors of Aluminum Salts Towards Fluoride: Significance of Aluminum Speciation and Transformation

[Assay of Three Kinds of Aluminum Fractions (al(a), Al(b) and Al(c)) in Polynuclear Aluminum Solutions by Al-Ferron Timed Spectrophotometry and Demarcation of Their Time Limits].

Aggregation and Dissociation of Aqueous Al13 Induced by Fluoride Substitution.