Abstract:Titanium carbide (Ti3C2Tx) with a distinctive structure, abundant surface chemical groups, and good electrical conductivity has shown great potential in fabricating superior gas sensors, but several challenges, such as low response kinetics, poor reversibility, and serious baseline drift, still remain. In this work, γ-poly(l-glutamic acid) (γ-PGA) with a blocking effect is exploited to modify Ti3C2Tx, thereby stimulating the positive response behavior of Ti3C2Tx and improving its gas sensing performance. On account of the unique synergetic interaction between Ti3C2Tx and γ-PGA, the response of the flexible Ti3C2Tx/γ-PGA gas sensor to 50 ppm NO2has been improved to a large extent (average 1127.3%), which is 85 times that of Ti3C2Tx (only 13.2%). Moreover, the as-fabricated Ti3C2Tx/γ-PGA sensor not only exhibits a shorter response/recovery time (average 43.4/3 s) compared with the Ti3C2Tx-based sensor (∼18.5/18.3 min) but also shows good reversibility and repeatability (relative standard deviation (RSD) <1%) at room temperature within 50% relative humidity (RH). The improved gas sensing properties of the Ti3C2Tx/γ-PGA sensor can be attributed to the enhancement of effective adsorption and the blocking effect assisted by water molecules. Furthermore, the gas sensing response of the Ti3C2Tx/γ-PGA sensor is studied at different RHs, and humidity compensation of the sensor is carried out using the multiple regression method. This work demonstrates a novel strategy to enhance the gas sensing properties of Ti3C2Tx by γ-PGA modification and provides a new way to realize highly responsive gas detection at room temperature.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssensors.1c00132?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssensors.1c00132</a>.Photographs of the fabrication process of MXene, Ti3C2Tx composite aqueous solutions, and the as-fabricated devices; schematic diagram of the testing system; SEM images of Ti3AlC2 and pristine γ-PGA; XPS spectra of Ti3C2Tx; I–V curves of the as-fabricated sensors; real-time resistance variation curves of devices 2 and 3 to 2–50 ppm NO2; dynamic response curves of Ti3C2Tx and Ti3C2Tx/γ-PGA-2 sensors for the various interfering gases; ambient humidity at 10 am every day for half a month; flexibility test; dynamic response curves of the Ti3C2Tx/γ-PGA-2 gas sensor at various RHs; response variation of the Ti3C2Tx/γ-PGA-2 gas sensor to 2–10 ppm NO2 at 28.8–79.3% RH; real-time resistance variation curves of MWCNTs and MWCNT/γ-PGA to 10–50 ppm NO2 at 50% RH; response curves of MWCNTs and MWCNT/γ-PGA gas sensors; flow configurations of different NO2 concentrations and RHs by MFCs; and gas sensing properties of the reported resistive-type NO2 gas sensors (<a class="ext-link" href="/doi/suppl/10.1021/acssensors.1c00132/suppl_file/se1c00132_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhanced NO2 Gas-Sensing Performance of 2D Ti3C2/TiO2 Nanocomposites by In-Situ Formation of Schottky Barrier

2D/2D {001}TiO2-/Ti3C2T composite with ultra-high sensing performance for NO2 at room temperature

2D/2D {001}Tio2-X/ti3c2tx Composite with Ultra-High Sensing Performance for NO2 at Room Temperature

Synthesis of Ti3C2Tx Nanosheets / ZnO Nanowires Composite Material for NO2 Gas Sensing

2H-Mos2/ti3c2tx MXene Composites for Enhanced NO2 Gas Sensing Properties at Room Temperature

D-Band Center Optimization of Ti3C2Tx MXene Nanosheets for Ultrahigh NO2 Gas Sensitivity at Room Temperature.

SnO2-inserted 2D Layered Ti3C2Tx MXene: from Heterostructure Construction to Ultra-High Sensitivity for Ppb-level H2S Detection

Ti3C2Tx Nanosheet/Bi2S3 Nanobelt Composites for NO2 Gas Sensing

Advanced 2D nanosheet-based gas sensor for sensitive detection of low concentration NO2 gas using In2O3/Ti3C2 layers

Mesoporous and Encapsulated In2O3/Ti3C2Tx Schottky Heterojunctions for Rapid and Ppb-Level NO2 Detection at Room Temperature.

Synergistic Coupling of 0D-2D Heterostructure from ZnO and Ti3C2Tx MXene-derived TiO2 for Boosted NO2 Detection at Room Temperature

Synthesis of Ti3C2Tx-derived and Layered TiO2 with NiO Nanosheets As Heterojunction Composites and Their Gas-Sensing Properties

Synthesis of Ti3C2Tx/ZnO composites decorated with PEDOT:PSS for NO2 gas sensors

Enhanced Blocking Effect: A New Strategy to Improve the NO 2 Sensing Performance of Ti 3 C 2 T x by γ-Poly( l -glutamic acid) Modification

Facile solvothermal synthesis of ZnO/Ti3C2Tx MXene nanocomposites for NO2 detection at low working temperature

d-Band Center Optimization of Ti 3 C 2 T x MXene Nanosheets for Ultrahigh NO 2 Gas Sensitivity at Room Temperature

Enhanced Gas Sensing Performance of ZnO/Ti3C2Tx MXene Nanocomposite

Fast and Recoverable NO2 Detection Achieved by Assembling ZnO on Ti3C2Tx MXene Nanosheets under UV Illumination at Room Temperature.

Enhanced Room-Temperature NO2 Sensing Through Deep Functional Group Hybridization in Nitrogen-Doped Monolayer Ti3C2Tx

Edge-Enriched Mo2TiC2Tx/MoS2 Heterostructure with Coupling Interface for Selectively NO2 Monitoring

Gas-sensitive performance of metal-organic framework-derived CuO NPs/Ti3C2TX MXene heterostructures for efficient NO2 detection at room temperature