Abstract:An experimental and computational investigation directed at understanding the role of buoyancy-driven convection during constrained melting of phase change materials (PCM) inside a spherical capsule is reported. The computations are based on an iterative, finite-volume numerical procedure that incorporates a single-domain enthalpy formulation for simulation of the phase change phenomenon. A Darcy’s Law-type porous media treatment links the effect of phase change on convection. Paraffin wax n-octadecane was constrained during melting inside a transparent glass sphere through the use of thermocouples installed inside the sphere. The melting phase front and melting fraction of the PCM are analyzed and compared with numerical solution obtained from the CFD code Fluent. Following a short period of symmetric melting due to prominence of diffusion, expedited phase change in the top region of the sphere and a wavy surface at the bottom of the PCM are observed. The computational predictions point to the strong thermal stratification in the upper half of the sphere that results from rising of the molten liquid along the inner surface of the sphere thus displacing the colder fluid. The waviness and excessive melting of the bottom of the PCM is shown to be underestimated by the experimental observation. This discrepancy is linked to the use of a support structure to hold the sphere. Measured temperature data and computational results near the bottom indicate the establishment of an unstable fluid layer that promotes chaotic fluctuations and is responsible for waviness of the bottom of the PCM. On the other hand, the comparison between the measured and computed temperatures in the top half of the sphere show the stable nature of the molten liquid layer. The computational results start to deviate from the thermocouple readings as one moves lower from the top of the sphere. This delay in predicting the melting instant is linked to the thermal stratification within the “constant temperature bath” that encloses the capsule.

Study on Solidification Characteristics of Phase Change Material in Rectangular Capsule for Cold Thermal Energy Storage System

Heat Transfer Characteristics Of Phase Change Material In Rectangular Capsule With Constant Heat Flux Cooling For Cool Storage System

A volume-shrinkage-based method for quantifying the inward solidification heat transfer of a phase change material filled in spherical capsules

A New Model of Phase Change Process for Thermal Energy Storage

Thermophysical Properties of a Novel Nanoencapsulated Phase Change Material

An Experimental Study of Inward Solidification of Nano-Enhanced Phase Change Materials (nepcm) Inside A Spherical Capsule

Experimental and Computational Study of Constrained Melting of Phase Change Materials (pcm) Inside A Spherical Capsule

STUDY ON CHARGING AND DISCHARGING RATES OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS EMPLOYING MULTIPLE PHASE CHANGE MATERIALS

Numerical Study on Thermal Performance and Flow Characteristic of Phase Change Material Heat Storage Unit with Capsule-Shaped Structure

Solidification Characteristics Modeling Of Phase Change Material In Plate Capsule Of Cool Storage System

Analysis of the Thermal Performance of Thermal Energy Storage Systems Using PCM Capsules

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Pore-scale numerical investigation on the thermal storage properties of packed-bed systems with phase change material microcapsules

Thermo-mechanical Analysis of Microcapsules Containing Phase Change Materials for Cold Storage

Investigation on Phase Change Behavior of Paraffin Phase Change Material in a Spherical Capsule for Solar Thermal Storage Units

Thermal Performance Analysis and Optimization of a Spherical PCM Capsule with Pin-Fins for Cold Storage

An experimental study of melting behavior of the phase change material in cylindrical capsules for thermal energy storage

Phase Change Material (PCM) Microcapsules for Thermal Energy Storage

Thermal and economic analysis of charging and discharging characteristics of composite phase change materials for cold storage

THERMAL STORAGE AND HEAT TRANSFER IN PHASE CHANGE MATERIAL INSIDE THE SPHERICAL CAPSULES OF A PACKED BED THERMAL STORAGE SYSTEM

An investigation on the thermal energy storage in an enclosure packed with micro-encapsulated phase change material