Abstract:This paper applies an energy method based on the high-order smooth curvature model to address the challenges of kinetostatically modeling the complicated nonlinear post-buckling behavior of inclined compliant beams. The proposed energy method is grounded in the principle of minimum strain energy, implying that the total strain energy is minimized at the equilibrium configuration. In this work, the high-order smooth curvature model is adopted to accurately model the bending strain energy of large deformation beams. Subsequently, the Lagrange multiplier method is employed to ascertain the minimum of strain energy while concurrently determining the corresponding tip loads. Additionally, the deformation shape and maximum stress are determined via the smooth curvature model. The proposed method is introduced for the first time in modeling compliant bistable mechanisms, and it is proven that the method can be used for modeling compliant beams with inclined angles ranging from 0 to 90 degrees. Following the modeling, finite element analysis and experimental tests are conducted to verify the accuracy of the proposed energy method. A comprehensive comparative analysis between proposed method and existing methods is conducted. The comparison results prove that the model is more computationally efficient without compromising modeling accuracy The proposed modeling method can not only be used for modeling compliant bistable mechanisms but also has extendable applications in modeling initially-curved compliant beams, contact-aid design problems, and distributed load problems.The present work not only advances the practical application of the proposed energy method but also lays the foundation for future research in modeling compliant mechanisms.

Extended Nonlinear Analysis Of Exactly-Constrained Compliant Compound Parallelogram Mechanisms

An Analytical Model for Nonlinear-Elastic Compliant Mechanisms with Tension-Compression Asymmetry

Stiffness modeling of compliant parallel mechanisms and applications in the performance analysis of a decoupled parallel compliant stage

Synthesis and modelling of one rotational constraint orientated compliant mechanisms

Compliant Mechanism Synthesis Using Nonlinear Elastic Topology Optimization With Variable Boundary Conditions

On the comprehensive static characteristic analysis of a translational bistable mechanism

Analytical Compliance Modeling of Serial Flexure-Based Compliant Mechanism under Arbitrary Applied Load

Modeling Large Deflections of Initially Curved Beams in Compliant Mechanisms Using Chained Beam Constraint Model

A comprehensive static modeling methodology via beam theory for compliant mechanisms

A novel compliance modeling method for compliant parallel mechanisms and its application

An Inverse Kinematic Model for the 3-PRS Compliant Parallel Mechanism with Forward Causative Force

A Semi-Analytical Modeling Method for the Static and Dynamic Analysis of Complex Compliant Mechanism

Dynamic Modeling and Experimental Verification of an RPR Type Compliant Parallel Mechanism with Low Orders

Design and DOF Analysis of a Novel Compliant Parallel Mechanism for Large Load

Extended Dynamic Stiffness Model for Analyzing Flexure-Hinge Mechanisms With Lumped Compliance

Systematic Design Method And Experimental Validation Of A 2-Dof Compliant Parallel Mechanism With Excellent Input And Output Decoupling Performances

Enabling the transfer matrix method to model serial–parallel compliant mechanisms including curved flexure beams

Modeling compliant bistable mechanisms: An energy method based on the high-order smooth curvature model

Design and Kinematic Analysis of a Flexible-Link Parallel Mechanism With a Spatially Quasi-Translational End Effector

Analysis and design of spatial compliant mechanisms using a 3-D dynamic stiffness model