Coupled Simulations in Colinear and Coaxial Continuous Pulsed Electric Field Treatment Chambers
K. Huang,L. Yu,L. Gai,J. Wang
DOI: https://doi.org/10.13031/trans.56.9167
2013-01-01
Transactions of the ASABE
Abstract:Pulsed electric field (PEF) treatment is an emerging non-thermal pasteurization technology for maintaining the safety and quality of food. As a key component of PEF technology, the treatment chamber should offer a homogeneous treatment condition for effective microbial inactivation. In this study, multiphysics simulations of the PEF process were developed to quantify the electric field, fluid flow characteristics, and heat transfer in colinear and coaxial treatment chambers. In addition, experiments on PEF pasteurization of watermelon juice in the two tested treatment chambers were carried out to measure the outlet temperature and microbial reduction rate. Based on the simulation results, Hulsheger's kinetic model was used to predict microbial inactivation in the watermelon juice. The simulation results showed higher electric field intensity and less temperature increase in the coaxial treatment chamber. The outlet temperatures in the two tested treatment chambers were well predicted by numerical simulations, with coefficients of determination (R-2) of 0.998 and 0.995 between measured and predicted values for the colinear and coaxial treatment chambers, respectively. In the coaxial treatment chamber, the calculated results better fitted the survival curves of total aerobic plate count and yeast and mold counts, with R-2 = 0.975 and 0.981, respectively, compared to R-2 = 0.989 and 0.883 in the colinear treatment chamber Numerical simulation of the PEF process is useful in optimizing the geometry of PEF treatment chambers and in determining the effectiveness of microbial inactivation.