Abstract:To overcome the material processing challenges induced by high levels of heat input in wire arc additive manufacturing (WAAM), an innovative WAAM method using pulsed arc plasma (PAP-WAAM), was developed by the authors in the previous study. In this method, the PAP generated by the pulsed voltage was used as the heat source. The pulse interval can be defined as the time interval between adjacent pulse voltages, which determines the ignition time and frequency of the arc plasma, thus influencing the forming process. However, the effect of pulse interval on the forming process has not yet been revealed. Here, the effects of pulse interval on forming process during the PAP-WAAM of Ti6Al4V, including thermal behavior, arc plasma characteristics, and metal transfer process, were investigated by experiments and simulation. The results exhibited that the interpass temperature and maximum peak temperature decrease with increasing pulse interval at the same arc plasma power, indicating an alleviation of heat accumulation along the building direction. As the pulse interval increased, the ignition mode of the arc plasma changed from ignition between the tungsten electrode and the previously deposited layer to ignition between the tungsten electrode and filler wire, which increased the proportion of discharge energy allocated to the filler wire, thus reducing the overall heat input required for material deposition. When the pulse interval was 300 and 400 ms, only the uninterrupted bridging transfer mode was observed during the deposition process. The uninterrupted bridging transfer is considered to contribute to forming a smooth and consistent layer appearance. In addition, longer pulse intervals resulted in less surface oxidation, narrower wall thickness, and better macrostructure, attributed to reduced heat input and improved effective heat dissipation. This research reveals the effect of pulse interval on forming process during PAP-WAAM, which benefits the fabrication of desirable metal parts.

Research on Relationship Between Arc Length and Arc Voltage in the Plasma Deposition Manufacture Process

Parallel Multi Arc Directed Energy Deposition: New Way to Achieve Efficient Manufacturing of Large-Size Lattice Sandwich Structure

Impact of Process Parameters on Forming Quality and Deposition Efficiency of Unsupported Rods in Wire Arc Additive Manufacturing

Numerical Simulation of Transient Multiphase Field During Hybrid Plasma-Laser Deposition Manufacturing

The flow and forming mechanism in the bypass hybrid variable polarity plasma arc additive manufacturing

Manufacture Of Rapid Metal Mold Based On Rp Prototype By Plasma Spray

Rapid Metal Tooling by Applying Plasma Spraying and Rapid Prototyping/rapid Tooling Technology for Metal Sheet Forming

Basic Research of Directed Energy Deposition for Aluminum 4043 Alloys Using Pulsed Variable Polarity Gas Metal Arc Welding

Metal transfer and forming behavior of bypass-coupled variable polarity plasma arc additive manufacturing

Hybrid Additive and Subtractive Manufacturing Method Using Pulsed Arc Plasma

A novel model for directed energy deposition-arc based on in-order stacking of primitives

A numerical model-based deposition strategy for heat input regulation during plasma arc-based additive manufacturing

Research Progress of Arc Additive Manufacture Technology

Numerical Study of Plasma–Electrode Interaction During Arc Discharge in a DC Plasma Torch

Research progress on numerical simulation of arc discharge plasma process

A novel optimizing Pulsed Plasma Gas Variable Polarity Plasma Arc Welding (PPG-VPPAW) method for improving weld quality

Power-arc model based adaptive arc length control of P-GMAW for Al–Mg alloy

A discharge plasma regulation method with spike current for electrical discharge machining

Effects of Pulse Interval on Forming Process in Wire Arc Metal Additive Manufacturing Using Pulsed Arc Plasma

Powder mixed-electrical discharge machining (EDM) with the electrode is made by fused deposition modeling (FDM) at Ti-6Al-4V machining procedure

Variable polarity plasma arc welding: Process development and its recent developments of detecting, modeling, and controlling