Abstract:Complementary metal–oxide–semiconductor (CMOS) microelectrode arrays integrate amplifier arrays with on-chip electrodes, offering high-throughput platforms for electrochemical sensing with high spatial and temporal resolution. Such devices have been developed for highly parallel constant voltage amperometric detection of transmitter release from multiple cells with single-vesicle resolution. Cyclic voltammetry (CV) is an electrochemical method that applies voltage waveforms, which provides additional information about electrode properties and about the nature of analytes. A 16-channel, 64-electrode-per-channel CMOS integrated circuit (IC) fabricated in a 0.5 μm CMOS process for CV is demonstrated. Each detector consists of only 11 transistors and an integration capacitor with a unit dimension of 0.0015 mm<sup>2</sup>. The device was postfabricated using Pt as the working electrode material with a shifted electrode design, which makes it possible to redefine the size and the location of working electrodes. The system incorporating cell-sized (8 μm radius) microelectrodes was validated with dopamine injection tests and CV measurements of potassium ferricyanide at a 1 V/s scanning rate. The cyclic voltammograms were in excellent agreement with theoretical predictions. The technology enables rigorous characterization of electrode performance for the application of CMOS microelectrode arrays in low-noise amperometric measurements of quantal transmitter release as well as other biosensing applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.analchem.1c01132?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.analchem.1c01132</a>.Traces of faulty electrodes (Figure S1); description of effects of process variation (<a class="ext-link" href="/doi/suppl/10.1021/acs.analchem.1c01132/suppl_file/ac1c01132_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Undistorted Cyclic Voltammograms at Scan Rates Up to 2.5 MV.s−1 Through Positive Feedback Compensation of Ohmic Drop

Ultrafast Cyclic Voltammetry at Scan Rates of Up to 3 MV S−1 Through a Single-Opamp Circuit with Positive Feedback Compensation of Ohmic Drop

Ultrafast Cyclic Voltammetry with Asymmetrical Potential Scan

Ultrafast Sinusoidal Voltammetry

Ultrafast Cyclic Voltammetric System Based On Ad829 Operational Amplifier

An Integrated Dual Ultramicroelectrode with Lower Solution Resistance Applied in Ultrafast Cyclic Voltammetry

Digital Simulation of Fast Cyclic Voltammogram by Integration of the Double Layer Charging Current

Simplex Optimization-Numerical Simulation Method For Fast Cyclic Voltammetric Curve Fitting

A Portable Digital-Control Electrochemical System with Automatic Ohmic Drop Compensation for Fast Scan Voltammetry and Its Application to Ultrasensitive Detection of Chromium(iii)

The Difference in the Effects of IR-Drop from the Negative Capacitance of Fast Cyclic Voltammograms

Ultrafast Double Potential Step Chronoamperometry with the Time Window Down to Submicrosecond.

A Low-Cost High-Performance Voltage Sensing Circuit with Proactive Parameter Design Compensation Network for SiC MOSFETs.

On-Chip Cyclic Voltammetry Measurements Using a Compact 1024-Electrode CMOS IC

Twin Disk Working Electrode: Potential Sampling Method For Cyclic Voltammetric Measurements

New Cyclic Voltammetry Method for Examining Phase Transitions: Simulated Results

Kinetic Studies of Dioxygen and Superoxide Ion in Acetonitrile at Gold Electrodes Using Ultrafast Cyclic Voltammetry

Numerical Resolving of Net Faradaic Current in Fast-Scan Cyclic Voltammetry Considering Induced Charging Currents

A Grid-free Approach for Simulating Sweep and Cyclic Voltammetry

Using chronoamperometry to rapidly measure and quantitatively analyse rate-performance in battery electrodes

Hot-Tip Scanning Electrochemical Microscopy: Theory and Experiments Under Positive and Negative Feedback Conditions

Recent advances in fast-scan cyclic voltammetry